Recommended Products
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 361–380 of 493 results
-
AUTOGRIP
RA：Rotary Pneumatic Cylinder,RA-100, RA-130, RA-17, RA-220, RA-270
- The rotary valve and cylinder body, all made of special light alloy, are light-weight.
- Through unique design, the rotary valve can considerably reduce the waste in compressing air and efficiently increase its utilization.
- When used, a little oil mist should be contained.
SKU: n/a -
AUTOGRIP
RC：Hydraulic Cylinder with Rotating Joint,RC-100, RC-125, RC-145, RC-200, RC-85
-
Center through-hole hydraulic cylinder, suitable for horizontal CNC lathes.
-
Can choose an external rotary joint with either single or double paths.
-
It meets the demand for coolant through spindle and airtight pressure detect function.
-
Has a buil-in check valve for safety.
-
Stroke control via proximity switch or linear positioning system
SKU: n/a -
-
AUTOGRIP
RE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A110, RE-A120, RE-A130
AUTOGRIPRE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A110, RE-A120, RE-A130
- For short form, lightweight, and high-speed rotary cylinder. To allow compressed air to be fed from the rear end of the distributor through the rotating union, suitable for the vertical lathe.
- Built-in safety check valves, pressure relief valves, and proximity sensors.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to the oil tank to avoid back pressure.
- When used, a little oil mist should be contained.
- The rotary cylinder should not run without air passing through the air port.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A150, RE-A200K, RE-A200L, RE-A250
AUTOGRIPRE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A150, RE-A200K, RE-A200L, RE-A250
- For short form, light weight and high speed rotary cylinder. To allow compressed air to be feed from the rear end of the distributor through the rotating union, suitable for vertical lathe.
- Built-in safety check valves, pressure relief valves and proximity sensor.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to the oil tank to avoid back pressure.
- When used, a little oil mist should be contained.
- The rotary cylinder should not run without air passing through the air port.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RE-L：Compact style Rotary Hydraulic Cylinder with Coolant Connection and Safety Device
- For short form, light weight and high speed rotary cylinder. To allow coolant to be feed from the rear end of the distributor through the rotating union.
- Built-in safety check valves, pressure relief valves and proximity sensor.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- The rotary cylinder should not run without liquid through coolant port.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RE：Compact style Rotary Hydraulic Cylinder with Stroke Control and Safety Device,RE-110, RE-120, RE-130
AUTOGRIPRE：Compact style Rotary Hydraulic Cylinder with Stroke Control and Safety Device,RE-110, RE-120, RE-130
- For short form, light weight and high speed rotary cylinder, suitable for vertical lathe.
- Built-in safety check valves, pressure relief valves and proximity sensor.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RH：Hydraulic Rotary Cylinder,RH-100, RH-125, RH-200, RH-65, RH-80
- High speed cylinder with the rotary valve and cylinder body, all made of special light alloy, light-weight.
- Hydraulic rotary cylinder through unique design, the rotary valve enables the inside bearing to get sufficient lubricating and cooling and endure high-speed rotary for longer service life.
- The drain port should be independently connected to the oil tank to avoid back pressure.
SKU: n/a -
AUTOGRIP
RJ：Coolant Rotating Joint,RJ-80, RJ-92
- Coolant joint for high speed, high pressure and medium delivery.
- Usable for oil and water-soluble coolant.
- Seal bushing inside is made of cemented carbide and ceramics, which provide higher wear-resistance.
- The joint should not run without liquid through coolant port.
SKU: n/a -
AUTOGRIP
RK-N：Short type Rotary Hydraulic Cylinder，RK-100N, RK-125N, RK-150N, RK-200N, RK-250, RK75N
- For short form, light weight and high speed rotary cylinder.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
SKU: n/a
