Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 321–336 of 522 results
-
HERBERT
MB ：MC Mechanical-Type Precision Machine Vise，MB-100AB, MB-130AB, MB-160AB, MB-200AB
- Advantages of dual-hands: not limited to the front and rear can be used.
- Hidden floating prevention mechanism reduces the floating rate of workpieces.
- In the recessed groove, a movable design structure is designed to achieve the omnidirectional chip prevention function.
- The working surface and the sliding surface of the movable body are heat-treated, the hardness can reach 45 degrees or more HRC, and the wear resistance is high.
- The dust-proof cover design can prevent cutting chips from blocking and attaching and malfunctioning caused by iron chips.
SKU: n/a -
CHANDOX
MB：3-Jaw Large Throunge Hole Power Chuck Fixture,MB-06, MB-08, MB-10
With built-in type cylinder,it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cyclinder： Inside wall of cyclinder being rustproof treated ;cyclinder can work under wet or high moisture circumstances without rusty or serized trouble.
2.Dusts-proof and Waterproof: Dust-proof and Waterproof structure prevents work-chip and coolant water form entering into inside of chuck cyclinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder: The cylinder is connected to chunk itself directly for obtaining better stability,less space,and higher machining efficiency.SKU: n/a -
HERBERT
MB：A-MC Mechanical-Type Precision Machine Vise，MB-100A, MB-130A, MB-160A, MB-200A
- The vise body adopts a vertical rib structure to enhance the body’s resistance to bending. It is made of cast iron with good ductility and its strength is 3 times higher.
- Hidden floating prevention mechanism reduces the floating rate of workpieces.
- In the recessed groove, a movable design structure is designed to achieve the omnidirectional chip prevention function.
- Using oil-free, combined with the slope design, it can generate more than 13 times the force, achieve the clamping effect, and never return pressure.
- The working surface and the sliding surface of the movable body are heat-treated, the hardness can reach 45 degrees or more HRC, and the wear resistance is high.
- The dust-proof cover design can prevent cutting chips from blocking and attaching and malfunctioning caused by iron chips.
SKU: n/a -
HERBERT
MC Power Vise-Universal Power Tilting Vise,MBT-100,MBT-160
- This vise is a commonly used milling machine vise, which can directly adjust the processing angle required by the target. The vertical adjustment angle can be adjusted freely between 0-50°, the marking angle is accurate, and the processing angle can be understood immediately.
- The main body of the diagonal vise adopts a vertical rib structure, which improves the bending resistance of the main body and replaces ductile iron with 3 times the strength.
- After heat treatment, the working surface and sliding surface of the movable body have a hardness of over 45 degrees HRC and high wear resistance.
- The newly developed patented oil-free dual-force mechanical lifting system can easily obtain high clamping force and never retract. It has a deeper jaw than a vise of the same grade and can reliably clamp high-tech structures.
SKU: n/a -
HERBERT
MC Power Vise-Universal Powerful-Type Precision Vise,MPV-100S, MPV-130S, MPV-160S, MPV-160SS, MPV-200S
HERBERTMC Power Vise-Universal Powerful-Type Precision Vise,MPV-100S, MPV-130S, MPV-160S, MPV-160SS, MPV-200S
- The body of the MPV double force vise adopts a vertical rib structure to enhance the bending resistance of the body. The cast iron with good ductility is selected, and the strength is 3 times higher.
- Hidden floating prevention mechanism reduces the floating rate of workpieces.
- In the recessed groove, a movable design structure is designed to achieve the omnidirectional chip prevention function.
- Using oil-free, combined with the slope design, it can generate more than 13 times the force, achieve the clamping effect, and never return pressure.
- The working surface and the sliding surface of the movable body are heat-treated, the hardness can reach 45 degrees or more HRC, and the wear resistance is high.
- The dust-proof cover design can prevent cutting chips from blocking and attaching and malfunctioning caused by iron chips.
SKU: n/a -
HERBERT
MC Power Vise-Universal Powerful-Type Precision Vise,MPV-160B
- The body of the MPV double force vise adopts a vertical rib structure to enhance the bending resistance of the body. The cast iron with good ductility is selected, and the strength is 3 times higher.
- Hidden floating prevention mechanism reduces the floating rate of workpieces.
- In the recessed groove, a movable design structure is designed to achieve the omnidirectional chip prevention function.
- Using oil-free, combined with the slope design, it can generate more than 13 times the force, achieve the clamping effect, and never return pressure.
- The working surface and the sliding surface of the movable body are heat-treated, the hardness can reach 45 degrees or more HRC, and the wear resistance is high.
- The dust-proof cover design can prevent cutting chips from blocking and attaching and malfunctioning caused by iron chips.
SKU: n/a -
HERBERT
MC Power Vise-Universal Powerful-Type Precision Vise,MPV-160L, MPV-160LS, MPV-200L, MPV-200LS
HERBERTMC Power Vise-Universal Powerful-Type Precision Vise,MPV-160L, MPV-160LS, MPV-200L, MPV-200LS
- Max opening 750mm
- The newly developed patented oil-free double-force booster can easily achieve high clamping force and never shrink.
- Hidden floating prevention mechanism reduces the floating rate of workpieces.
SKU: n/a -
CHANDOX
MC：Super Thin Square Chucks,MC-06, MC-08, MC-10, MC-12
1.MC is a fixed-size grinding method: the height tolerance of any point of the square chuck W, X, Y, Z of the same specification is within 0.05mm.
2. MC specifications can be replaced with raw claws to process irregular shapes and replace a large number of jigs on the central machine, which is more economical and convenient.
3. The precision tolerance of repeated clamping by hard claws is within 0.02mm.
4. After side parallel correction, the parallel tolerance of the hard claw clamping is within 0.05mm.SKU: n/a -
HOMGE
MD：VISE IN-ROW,HRV-10055-MD, HRV-10065-MD, HRV-10075-MD, HRV-5030-MD, HRV-5040-MD, HRV-5050-MD, HRV-5060-MD, HRV-5070-MD, HRV-7543-MD, HRV-7553-MD, HRV-7563-MD, HRV-7573-MD
HOMGEMD：VISE IN-ROW,HRV-10055-MD, HRV-10065-MD, HRV-10075-MD, HRV-5030-MD, HRV-5040-MD, HRV-5050-MD, HRV-5060-MD, HRV-5070-MD, HRV-7543-MD, HRV-7553-MD, HRV-7563-MD, HRV-7573-MD
HRV- Vise In-Row is a kind of multiple vise. Full set of this vise is made of Tool Steel with heat treatment more than HRC 60º of Hardness and then ground precisely to ensure durability. It enlarges clamping range. No matter what shape of working piece, such as square, round, cylindrical or any irregular shapes, it can be positioned quickly. Precision tooth locating is adjustable so workpieces can be fixed easily.
This vise is suitable for horizontal, vertical and 4-Axis CNC Machining Centers and Surface Grinder, …etc.
SKU: n/a -
CHANDOX
MEL,MELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chuck Fixtures,MEL-06, MEL-08, MEL-10, MELT-06, MELT-08, MELT-10
CHANDOXMEL,MELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chuck Fixtures,MEL-06, MEL-08, MEL-10, MELT-06, MELT-08, MELT-10
1. Crank Type Long Jaw Stroke with the large through-hole.
2. A super long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
3. Install on the hydraulic vertical stationary cylinder to connect the hydraulic pump to actuate the clamping work.SKU: n/a -
HERBERT
MHV-MC Hydraulic-Type Precision Vise,MHV-100A,MHV-130A,MHV-160A，MHV-200A
- The newly developed patented hydraulic pump is trouble-free and can be easily clamped to high holding force.
- Compared with the MPV series vise, it saves effort.
- The vise body adopts a vertical rib structure to enhance the body’s resistance to bending. It is made of cast iron with good ductility and its strength is 3 times higher.
- Hidden floating prevention mechanism reduces the floating rate of workpieces.
- In the recessed groove, a movable design structure is designed to achieve the omnidirectional chip prevention function.
- The working surface and the sliding surface of the movable body are heat-treated, the hardness can reach 45 degrees or more HRC, and the wear resistance is high.
- The dust-proof cover design can prevent cutting chips from blocking and attaching and malfunctioning caused by iron chips.
SKU: n/a
Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.