Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 305–320 of 522 results
-
YTUM
K72/D：4-JAW INDEPENDENT CHUCKS,K72-160/D3, K72-200/D3, K72-200/D4, K72-200/D5, K72-250/D4, K72-250/D5, K72-250/D6, K72-320/D4, K72-320/D5, K72-320/D6, K72-320/D8, K72-350/D4, K72-350/D5, K72-350/D6, K72-350/D8, K72-400/D11, K72-400/D5, K72-400/D6, K72-400/D8, K72-500/D11, K72-500/D15, K72-500/D6, K72-500/D8, K72-630/D11, K72-630/D15
YTUMK72/D：4-JAW INDEPENDENT CHUCKS,K72-160/D3, K72-200/D3, K72-200/D4, K72-200/D5, K72-250/D4, K72-250/D5, K72-250/D6, K72-320/D4, K72-320/D5, K72-320/D6, K72-320/D8, K72-350/D4, K72-350/D5, K72-350/D6, K72-350/D8, K72-400/D11, K72-400/D5, K72-400/D6, K72-400/D8, K72-500/D11, K72-500/D15, K72-500/D6, K72-500/D8, K72-630/D11, K72-630/D15
SKU: n/a -
YTUM
K72A2：4-JAW INDEPENDENT CHUCKS,K72-160/A24, K72-200/A24, K72-200/A25, K72-200/A26, K72-250/A24, K72-250/A25, K72-250/A26, K72-250/A28, K72-320/A211, K72-320/A24, K72-320/A25, K72-320/A26, K72-320/A28, K72-350/A211, K72-350/A25, K72-350/A26, K72-350/A28, K72-400/A211, K72-400/A25, K72-400/A26, K72-400/A28, K72-500/A26, K72-500/A28
YTUMK72A2：4-JAW INDEPENDENT CHUCKS,K72-160/A24, K72-200/A24, K72-200/A25, K72-200/A26, K72-250/A24, K72-250/A25, K72-250/A26, K72-250/A28, K72-320/A211, K72-320/A24, K72-320/A25, K72-320/A26, K72-320/A28, K72-350/A211, K72-350/A25, K72-350/A26, K72-350/A28, K72-400/A211, K72-400/A25, K72-400/A26, K72-400/A28, K72-500/A26, K72-500/A28
SKU: n/a -
AUTOSTRONG
KD：3-jaw strong scroll chuck D1 camlock direct mounting,KD4-8, KD5-8, KD6-10, KD6-12, KD6-8, KD8-10, KD8-12
AUTOSTRONGKD：3-jaw strong scroll chuck D1 camlock direct mounting,KD4-8, KD5-8, KD6-10, KD6-12, KD6-8, KD8-10, KD8-12
- Camlock direct mounting. Easy and quick to install Self-centering chuck improve efficiency. KD types chucks have wider utilization range; Top jaws can be changed quickly between hard jaws or soft jaws hard jaws suitable for heavy cutting; soft jaws suitable for light and precision cutting. It is convenient to change between hard jaws and soft jaws. Interchangeable utilization of internal and external hard jaws for widely clamping methods SK self-centering scroll chuck feature economical and durable, suitable for mass production. Standard accessories chuck wrench, hex. key. and a set of mounting bolts. (UNC-bolts) The body is made of highly
SKU: n/a -
AUTOSUPER
KV：K-Type Milling Vise，KV-4, KV-6, KV-8
1. Body, movable jaw and swivel base made of close-grained high tensile iron casting. Built for heavy dute machining and retained accuracy.
2. Jaw plates of hardened and ground tool steel.
A-Type milling vise is used for drilling、milling and cutting of machining method.SKU: n/a -
CHANDOX
L-R：Solid Rotary Hydraulic Cylinder(BUILT-IN CHECK VALVE),L1020R, L1225R, L1530R, L2035R
1. The solid rotary cylinder has a closed structure and can be installed in either a vertical or horizontal direction.
2. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.
4. Super thin structure：
Super thin outer structure reduces the interference with machines and lowers the burden of machines.。SKU: n/a -
CHANDOX
L-RA,L-RC：Solid Rotary Hydraulic Cylinder(CHECK VALVE),L1020RA, L1020RC, L1225RA, L1225RC, L1530RA, L1530RC
CHANDOXL-RA,L-RC：Solid Rotary Hydraulic Cylinder(CHECK VALVE),L1020RA, L1020RC, L1225RA, L1225RC, L1530RA, L1530RC
L-RA:Air Connection
1. A central output airway is used to actuate the customized jigs or for gap detection.
2. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.
L-RC:Coolant Connection
1. A central output coolant way is used to connect to the front jigs to inject coolant for cleaning chips or performing other tasks.
2. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.SKU: n/a -
CHANDOX
L-RE：Solid Rotary Hydraulic Cylinder(BUILT-IN CHECK VALVE & SENSOR),L1020RE, L1225RE, L1530RE, L2035RE
CHANDOXL-RE：Solid Rotary Hydraulic Cylinder(BUILT-IN CHECK VALVE & SENSOR),L1020RE, L1225RE, L1530RE, L2035RE
1. The solid rotary cylinder has a closed structure and can be installed in either a vertical or horizontal direction.
2. A piston stroke detection device is used to confirm that the clamping device is in the correct position.
3. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
4. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.SKU: n/a -
CHANDOX
L-RE(A)：Compact Solid Rotary Hydraulic Cylinder(BUILT-IN CHECK VALVE & SENSOR),L1330RE, LS1120RE, LS1120REA, LS1221RE, LS1221REA, LS1330REA
CHANDOXL-RE(A)：Compact Solid Rotary Hydraulic Cylinder(BUILT-IN CHECK VALVE & SENSOR),L1330RE, LS1120RE, LS1120REA, LS1221RE, LS1221REA, LS1330REA
REA:Air Connection
1. A central output airway is used to actuate the customized jigs or for gap detection.
2. A piston stroke detection device is used to confirm that the clamping device is in the correct position.
3. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
4. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.
Remark : The chuck adapt with cylinder is “Customize” by customer demandSKU: n/a -
CHANDOX
L：Solid Rotary Hydraulic Cylinders,L0815, L1020, L1225, L1530, L2035
1. The solid rotary cylinder has a closed structure and can be installed in either a vertical or horizontal direction.
2. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.SKU: n/a -
-
-
AUTOSTRONG
M：High Speed Through-hole Rotary Hydraulic Cylinder,M0926A, M0928A, M1036, M1038, M1236, M1246, M1546, M1552, M1768, M1870, M1875, M1878, M2078, M2085, M2091, M2511S
AUTOSTRONGM：High Speed Through-hole Rotary Hydraulic Cylinder,M0926A, M0928A, M1036, M1038, M1236, M1246, M1546, M1552, M1768, M1870, M1875, M1878, M2078, M2085, M2091, M2511S
- Compact and lightweight: Comparing with the regular product, it is compact (reduced to MAX 95mm) and lighter (weighted MAX 4.5kg). It’s more stable to reduce the burden of the machinery at high speed turning. The largest bore: Comparing with the regular product, it has about 20% larger bore diameter for utilizing the capacity of machinery. The safety structure: It can retain the gripping force by check valve which prevents the workpiece from flying out when the pressure declining sharply. Reduce the weight of the spindle.
SKU: n/a -
AUTOSTRONG
MA :Compact high speed through hole rotary hydraulic cylinder,MA1453
- The compact hydraulic cylinder which is shorten the length about 30% and light weight can reduce the spindle loading while running in high speed. Safety structure with built-in patented check valve mechanism ensures that pressure is maintained immediately when abnormal power failure. The newly patented model with opened back-end design is convenient for back-mounted bolt.
SKU: n/a -
CHANDOX
MA：2 Actuating Axes Self-Centering Solid Air Chuck Fixtures,MA-06, MA-08, MA-10
2 actuating axes self-centering solid air chuck fixtures is great for machining center. Two pairs of jaws clamp one after another to assure a workpiece to be locked completely.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.4-jaw Clamping and Self-centering：4-jaw clamping are steadier for machining. Two pairs of jaws are moved independently to assure complete lock and self-centering.SKU: n/a
Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.