Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 257–272 of 522 results
-
Tapping Machine, TRADE MAX
HM：Hydraulic Tapping Machine Type HM-22,32,42,50
Mainly relies on hydraulic to operate, working range is up to 1600mm, tapping capacity is M3~M50. Can be used for the production of inner hole threads of different sizes. The stand is designed as a movable arm, providing the user with an easy and convenient way to operate. Include work cart. According to the working conditions, accessories can also be purchased to achieve multi-functional tapping.
SKU: n/a -
HOMGE
HMAV,HEAV：STANDARD FIXED ANGLE PRECISION VISE (EXTENDED TYPE),HEAV-160, HEAV-200, HMAV-160, HMAV-200
HOMGEHMAV,HEAV：STANDARD FIXED ANGLE PRECISION VISE (EXTENDED TYPE),HEAV-160, HEAV-200, HMAV-160, HMAV-200
- Equipped with CHIP PROTECTION COVER. Prevents chips getting into the vise and avoids any possible damage to internal parts.
- 2.Constructed of high grade materials with Slideways HARDENED to HRC 50º to ensure high accuracy and durability.
- 3.ANGLE-LOCK MECHANISM provides downward pressure on Jaw during clamping ensuring Jaws remain parallel and work is held accurately
- 4.
The patented MULTI-POWER SYSTEM built of HIGH GRADE BEARING STEEL provides extremely high clamping pressure. The pressure is more consistent and eliminates oil leakage and maintenance problems associated with Hydraulic Vises.
SKU: n/a -
HOMGE
HMC：LOCK II MACHINE VISE,HMC-6
- Can be placed side-by-side on your N/C equipment.
- Permits fast accurate multiple machining.
- Sides ground.
- ACCURACY Both sides square to bottom to 0.01mm.
- Parallel with each other to 0.02mm (All others same as HAV-6” Vise.)
- Keyways on bottom to steady jaw plate.
SKU: n/a -
Tapping Machine, TRADE MAX
HMT：Hydraulic Tapping Machine Type HMT-22,32,42,50
Mainly relies on hydraulic to operate. Working cart have T-slot on the platform. Working range is up to 1900mm, tapping capacity is M3~M50. Can used for the production of inner hole threads of different sizes. The stand is designed as a movable arm, providing the user with an easy and convenient way to operate. Include work cart. According to the working conditions, accessories can also be purchased to achieve multi-functional tapping.
SKU: n/a -
HERBERT
HNSP-MC Precision Super Hi-Pressure Rapid Vise,HNSP-100, HNSP-130, HNSP-160, HNSP-200
- MC Precision Super Hi-Pressure Rapid Vise is suitable for MC vertical-horizontal integrated cutting machine, milling machine, drilling machine, etc. It is a fixture for quantitative production.
- The new dust-proof design can prevent malfunction caused by cutting chips.
- The newly developed patented hydraulic seat only needs to cooperate with the hydraulic source to easily achieve high clamping force.
SKU: n/a -
HOMGE
HPAC-S：MULTI-POWER CNC PRECISION FIXED ANGLE VISE,HPAC-100S, HPAC-130S, HPAC-160S
-
-
- The patented MULTI-POWER SYSTEM is built of HIGH GRADE BEARING STEEL which doubles the clamping force. Adjustable clamping force of 0~6000kg. With this special patented system the pressure is more consistent and eliminates oil leakage and maintenance problems associated with Hydraulic Vices.
- 2.Slide ways are HARDENED to HRC 50º to further increase durability and maintain positioning height over long use.
-
-
- 3.Using high-grade iron of over FCD 60 grade for high rigidity and also ANGLE-LOCK SYSTEM, which automatically pulls the work-piece down to the accurate position of within 0.01mm under 4500kg of pressure, this vise is most suitable for precision mould making on Machining Centers.
-
- 4.Vise body is made of Ductile lron above FCD 60 grade for high precision and durability.
It is made in one solid piece and has very high rigidity with a force of 4500kg, the shape will deflect less than 0.01mm.
- 4.Vise body is made of Ductile lron above FCD 60 grade for high precision and durability.
- 5.Vise can be mounted horizontally or vertically.
- 6.Adjusting stop ring: this simple and effective presetting device enables to preset each desired clamping force and it guarantees to repeat each clamping operation at the same clamping force.
SKU: n/a -
-
HOMGE
HPAC：MULTI-POWER CNC PRECISION FIXED ANGLE VISE,HPAC-130, HPAC-160, HPAC-160L, HPAC-200
-
- Vise body is made of Ductile lron above FCD 60 grade for high precision and durability and is made in one solid piece. It has very high rigidity and with a force of 4500kg, the shape will deflect less than 0.01mm
- 2.Slide ways are HARDENED to HRC 50° to further increase durability and maintain positioning height over long use.
- 3.Using high-grade iron of over FCD 60 grade for high rigidity and also ANGLE -LOCK SYSTEM which automatically pulls the work-piece down to the accurate position of within 0.01mm under 4500kg of pressure, this vise is most suitable for precision mould making on Machining Centers.
-
- 4.Vise can be mounted horizontally or vertically.
- 5.The patented MULTI-POWER SYSTEM built of HIGH GRADE BEARING STEEL doubles the clamping force.
The pressure is more consistent and eliminates oil leakage and maintenance problems associated with Hydraulic Vices.
With the first half a turn the vise will clamp with 2500kg pressure.
With a second half turn it will apply 4500kg of clamping force.
This special patented system makes the clamping force constant. - 6.Adjusting stop ring: this simple and effective presetting device enables to preset each desired clamping force and it guarantees to repeat each clamping operation at the same clamping force.
SKU: n/a -
-
HOMGE
HPAQ-F：MULTI-POWER CNC SUPER VISE (FRONT-MOUNTING TYPE),HPAQ-160F, HPAQ-200F
-
-
- 1.Vise Fixed Jaw is made of high quality steel and HARDENED to HRC 55º. Vise body is made of Ductile Iron above FCD 60 grade for high precision and durability. With a force of 4500kg, the shape will deflect less than 0.005mm.
- 2.Slide ways are HARDENED to HRC 50º to further increase durability and maintain positioning height over long use.
- 3.The Special ANGLE-LOCK SYSTEM with compact design and high-grade iron of over FCD 60 grade for high rigidity automatically pulls the work-piece down to the accurate position of within 0.005mm under 4500kg of pressure. This vise is most suitable for precision mould making on Machining Centers.
-
-
- 4.Vise can be mounted horizontally or vertically.
- 5.The patented MULTI-POWER SYSTEM built of HIGH GRADE BEARING STEEL doubles the clamping force.
The pressure is more consistent and eliminates all leakage and maintenance problems associated with Hydraulic Vices.
With the first half a turn the vise will clamp with 2500kg pressure.
With a second half turn it will apply 4500kg of clamping force.
This special patented system makes the clamping force constant. - 6.Adjusting stop ring: This simple and effective presetting device enables to preset each desired clamping force and it guarantees to repeat each clamping operation at the same clamping force.
SKU: n/a -
Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.