Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 481–496 of 522 results
-
AUTOGRIP
TR：Short type Thru-Hole Rotary Hydraulic Cylinder with Safety Device,TR-1075, TR-539, TR-646, TR-853
AUTOGRIPTR：Short type Thru-Hole Rotary Hydraulic Cylinder with Safety Device,TR-1075, TR-539, TR-646, TR-853
- This is a compact, short form, light weight through-hole rotary cylinder.
- With patented build-in safety check valves and pressure relief valves.
- Large feed port and drain port, large input and keep drain smoothly.
- Can be screwed from the front end or rear end of cylinder when mounting.
- For use with vertical or horizontal spindles.
SKU: n/a -
AUTOGRIP
TS：Short Type Rotary Hydraulic Cylinder with Big-bore Thru-Hole and Safety Device,TS-1081, TS-539, TS-866
AUTOGRIPTS：Short Type Rotary Hydraulic Cylinder with Big-bore Thru-Hole and Safety Device,TS-1081, TS-539, TS-866
- Bigger bore through-hole design.
- Super short form, light weighted.
- Built-in safety check valves and pressure relief valves.
- Front/Rear end mounting.
- Diameter of coolant collector’s drain port is optional. Default : Ø33 ; optional : Ø40, Ø60.
SKU: n/a -
SHINE
TSC-262： HEAVY DUTY HIGH PERFORMANCE PRECISE LIVE CENTER
Type: Live centers series
Duty: HeavyApplication: CNC heavy duty lathe, heavy duty high speed lathe
Working Usage: Applicable for the long workpiece and heavy duty turning process
Structure: Combination of double row precise ball bearing and thrust bearing and needle bearing, with the design of three supporting points.
Accessories: 1. For TSC262-3A/4A/5A, Y type spanner. / 2. For TSC262-6A, special Y type spanner.
TIR: Less than 0.002mm
SKU: n/a -
SHINE
TSC-263： HEAVY DUTY LONG NOSE LIVE CENTER，TSC-263-3A, TSC-263-4A, TSC-263-5A
Type: Live centers series
Duty: HeavyApplication CNC heavy duty lathe, heavy duty high speed lathe
Working Usage Applicable for the long workpiece and heavy duty turning process
Structure Combination of double row precise ball bearing and thrust bearing and needle bearing, with the design of three supporting points.
Accessories Y type spanner
TIR Less than 0.002mm
SKU: n/a -
SHINE
TSC-761： INTERCHANGEABLE MEDIUM DUTY LIVE CENTER，TSC-761-3, TSC-761-4, TSC-761-5
Type: Interchangeble live center
Duty: MediumApplication CNC lathe and high speed lathe or other lathe machine.
Working Usage Applicable for small dia. and the length less than 300mm ordinary turning process.
Structure Combination of thrust bearing and with the design of double supporting point.
Accessories 61 type Tips and 61 type pin punch.
TIR Less than 0.005mm
SKU: n/a -
HOMGE
UV：PRECISION UNIVERSAL VISE,UV-120, UV-80
- Precision graduation for accurate reading
- Horizontal swivel through 360º
- Tilts 45º vertically
- Its swiveling and tilting features make this unit well suited for straight or inclined surface, angular drilling machining on various machine tools as precision grinding machine, boring and milling machine, electrical discharge machine, etc.
SKU: n/a -
HERBERT
VCP：MC Mechanical-Type Precision Machine Vise，VCP-100, VCP-130, VCP-160, VCP-200
- Hidden floating prevention mechanism reduces the floating rate of workpieces.
- In the recessed groove, a movable design structure is designed to achieve the omnidirectional chip prevention function.
- The working surface and the sliding surface of the movable body are heat-treated, the hardness can reach 45 degrees or more HRC, and the wear resistance is high.
- The dust-proof cover design can prevent cutting chips from blocking and attaching and malfunctioning caused by iron chips.
SKU: n/a -
HERBERT
VCP：MC Mechanical-Type Precision Machine Vise，VCP-160L, VCP-200G, VCP-200L, VCP-250G
- Hidden floating prevention mechanism reduces the floating rate of workpieces.
- In the recessed groove, a movable design structure is designed to achieve the omnidirectional chip prevention function.
- The working surface and the sliding surface of the movable body are heat-treated, the hardness can reach 45 degrees or more HRC, and the wear resistance is high.
- The dust-proof cover design can prevent cutting chips from blocking and attaching and malfunctioning caused by iron chips.
SKU: n/a
Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.