Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 449–464 of 522 results
-
AUTOSTRONG
SK：3-jaw strong scroll chuck plain back, 2-piece jaws (front and back mounted),SK-10, SK-12, SK-16, SK-4, SK-6, SK-7, SK-8, SK-9
AUTOSTRONGSK：3-jaw strong scroll chuck plain back, 2-piece jaws (front and back mounted),SK-10, SK-12, SK-16, SK-4, SK-6, SK-7, SK-8, SK-9
- Front and back mounted (SK-16 excluded). Easy to install Self-centering chuck improve efficiency. SK types chucks have wider utilization range; Top jaws can be changed quickly between hard jaws or soft jaws hard jaws suitable for heavy cutting; soft jaws suitable for light and precision cutting. It is convenient to change between hard jaws and soft jaws. Interchangeable utilization of internal and external hard jaws for widely clamping methods SK self-centering scroll chuck feature economical and durable, suitable for mass production. Gripping accuracy of 0.03mm (0.0012 inch) T.I.R.. The body is made of highly strength and durability MEEHANITE. It is suitably used for high speed revolution also durable 3 times more than regular material.
SKU: n/a -
CHANDOX
ST：Stainless Steel Super Thin Chucks,ST-02, ST-03, ST-04, ST-05, ST-06
1. By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2. Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3. The stainless steel body can be placed in electrical discharge machining fluid
4. Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5. 2″ chucks can even grip up to the smallest size of 0.8mm.
SKU: n/a -
LI-HSUN
SW：LATHE SUPER-LOAD CENTER-SW TYPE，SW-80#, SW-MT.5, SW-MT.6, SW-MT.7
- Shaft uses alloy steel and hardened through vacuum heat treatment to( HRC60°～62°).
- Applicable to heavy duty loads.
- The tailstock pressure of lathe adjusts to five to twelve kilograms. (for reference)
※ Waterproof design
SKU: n/a
Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.