Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 497–512 of 522 results
-
SAFEWAY
VCV-L ：Machine Vise (Larger opening) Catalog,VCV-160V-L, VCV-160V-L-SJ, VCV-160V-XL, VCV-160V-XL-SJ, VCV-200V-BL, VCV-200V-BL-SJ, VCV-200V-L, VCV-200V-L-SJ, VCV-200V-XL, VCV-200V-XL-SJ
SAFEWAYVCV-L ：Machine Vise (Larger opening) Catalog,VCV-160V-L, VCV-160V-L-SJ, VCV-160V-XL, VCV-160V-XL-SJ, VCV-200V-BL, VCV-200V-BL-SJ, VCV-200V-L, VCV-200V-L-SJ, VCV-200V-XL, VCV-200V-XL-SJ
- Most Suitable for Vertical Machine Center, Milling Machine
- High Rigidity Material: Ductile Iron FCD 600 JIS (= GGG-60)(60kg/mm2, 80,000 psi ).
- Vise body- sliding surface: Hardened HRC45,durable and accurate.
- Stationary and Movable Jaw-Hardened HRC55,and Grinding, durable and accurate.
- Chip Cover- Prevent chips falling
- Clamping system: Screw Clamping
- Max. opening capacity and compact total length of vise body
SKU: n/a -
SAFEWAY
VCV：Machine Vise,VCV-100V, VCV-100V-SJ, VCV-130V, VCV-130V-SJ, VCV-160V, VCV-160V-SJ, VCV-200V, VCV-200V-SJ, VCV-250V, VCV-250V-SJ
SAFEWAYVCV：Machine Vise,VCV-100V, VCV-100V-SJ, VCV-130V, VCV-130V-SJ, VCV-160V, VCV-160V-SJ, VCV-200V, VCV-200V-SJ, VCV-250V, VCV-250V-SJ
- Most Suitable for Vertical Machine Center, Milling Machine
- High Rigidity Material: Ductile Iron FCD 600 JIS (= GGG-60)(60kg/mm2, 80,000 psi ).
- Vise body- sliding surface: Hardened HRC45,durable and accurate.
- Stationary and Movable Jaw-Hardened HRC55,and Grinding, durable and accurate.
- Chip Cover- Prevent chips falling
- Clamping system: Screw Clamping
SKU: n/a -
SAFEWAY
VDHV ：Double Lock Hydraulic Vise,VDHV-130V, VDHV-130V-SJ, VDHV-160V, VDHV-160V-SJ, VDHV-200V, VDHV-200V-SJ, VDHV-250V, VDHV-250V-SJ
SAFEWAYVDHV ：Double Lock Hydraulic Vise,VDHV-130V, VDHV-130V-SJ, VDHV-160V, VDHV-160V-SJ, VDHV-200V, VDHV-200V-SJ, VDHV-250V, VDHV-250V-SJ
- Most Suitable for Vertical Machine Center
- Clamping system: mechanical / hydraulic type
- High Rigidity Material: Ductile Iron FCD 600 JIS (= GGG-60)(60kg/mm2, 80,000 psi ).
SKU: n/a -
AUTOGRIP
VH:Thru-Hole Stationary 2/3-Jaw Power Chuck,VH2-2204, VH2-2205, VH2-2206, VH2-2208, VH2-2210, VH2-3204, VH2-3205, VH2-3206, VH2-3208, VH2-3210
AUTOGRIPVH:Thru-Hole Stationary 2/3-Jaw Power Chuck,VH2-2204, VH2-2205, VH2-2206, VH2-2208, VH2-2210, VH2-3204, VH2-3205, VH2-3206, VH2-3208, VH2-3210
- STATIONARY CHUCK with two or three jaws for drilling, milling and other machines.
- Specification and size of matching chuck for model VH2-2200 is the same as model 2H-2 ;
- Specification and size of matching chuck for model VH2-3200 is the same as model 3H-2.
- Specification and size of matching chuck for model VH-200 is the same as model 2H ;
- Specification and size of matching chuck for model VH-300 is the same as model 3H.
SKU: n/a -
SAFEWAY
VHV-L ：Hydraulic Vise,VHV-160V-L, VHV-160V-L-SJ, VHV-160V-XL, VHV-160V-XL-SJ, VHV-200V-BL, VHV-200V-BL-SJ, VHV-200V-L, VHV-200V-L-SJ, VHV-200V-XL, VHV-200V-XL-SJ
SAFEWAYVHV-L ：Hydraulic Vise,VHV-160V-L, VHV-160V-L-SJ, VHV-160V-XL, VHV-160V-XL-SJ, VHV-200V-BL, VHV-200V-BL-SJ, VHV-200V-L, VHV-200V-L-SJ, VHV-200V-XL, VHV-200V-XL-SJ
- Most Suitable for Vertical Machine Center
- High Rigidity Material: Ductile Iron FCD 600 JIS (= GGG-60)(60kg/mm2, 80,000 psi ).
- Vise body- sliding surface: Hardened HRC45,durable and accurate.
- Stationary and Movable Jaw-Hardened HRC55,and Grinding, durable and accurate.
- Chip Cover- Prevent chips falling
- Clamping : Hydraulic type
- Max. opening capacity and compact total length of vise body
SKU: n/a -
SAFEWAY
VHV： Hydraulic Vise,VHV-130V, VHV-130V-SJ, VHV-160V, VHV-160V-SJ, VHV-200V, VHV-200V-SJ, VHV-250V, VHV-250V-SJ
SAFEWAYVHV： Hydraulic Vise,VHV-130V, VHV-130V-SJ, VHV-160V, VHV-160V-SJ, VHV-200V, VHV-200V-SJ, VHV-250V, VHV-250V-SJ
- Most Suitable for Vertical Machine Center
- High Rigidity Material: Ductile Iron FCD 600 JIS (= GGG-60)(60kg/mm2, 80,000 psi ).
- Vise body- sliding surface: Hardened HRC45,durable and accurate.
- Stationary and Movable Jaw-Hardened HRC55,and Grinding, durable and accurate.
- Chip Cover- Prevent chips falling
- Clamping : Hydraulic type
SKU: n/a -
HERBERT
VIP：MC Power Vise-Super Open Type Vise，VIP-100, VIP-130, VIP-160, VIP-200
- The body of the VIP constant-pressure double-force vise adopts a vertical rib structure to enhance the body’s bending resistance. It is made of cast iron with good ductility, and its strength is 3 times higher.
- Hidden floating prevention mechanism reduces the floating rate of the workpiece.
- The movable design structure is designed in the recessed groove to achieve the omnidirectional chip prevention function.
- The use of oil-free double-force constant-pressure mechanical pressurization system (segmented selection), combined with the slope design, can generate more than 13 times the force, achieve the clamping effect, and never return pressure.
- After heat treatment, the working surface and the sliding surface of the movable body have a hardness of over 45 degrees HRC and high wear resistance.
- The dust-proof cover design can prevent cutting chips from blocking and attaching, and poor operation caused by iron chips.
SKU: n/a -
CHANDOX
VL-DP：3-Jaw Solid Chuck with Anti-chips Sealed & Water-proof Flange Plate for Vertical Lathe,VL-12DP, VL-15DP, VL-18DP, VL-21DP, VL-24DP, VL-32DP
CHANDOXVL-DP：3-Jaw Solid Chuck with Anti-chips Sealed & Water-proof Flange Plate for Vertical Lathe,VL-12DP, VL-15DP, VL-18DP, VL-21DP, VL-24DP, VL-32DP
1.The dustproof patent structure can prevent the metal chips get into the chuck inside.
2.The clean hole design can blow air into the chuck internal to clean out the residual chips and coolant.
3.The drainage plate structure design can prevent the coolant get into the spindle internally.SKU: n/a -
AUTOGRIP
VP：Non-Thru-Hole Stationary 2/3-Jaw Power Chuck,VP-204, VP-205, VP-206, VP-208, VP-210, VP-304, VP-305, VP-306, VP-308, VP-310
AUTOGRIPVP：Non-Thru-Hole Stationary 2/3-Jaw Power Chuck,VP-204, VP-205, VP-206, VP-208, VP-210, VP-304, VP-305, VP-306, VP-308, VP-310
- STATIONARY CHUCK with two or three jaws for drilling, milling and other machines.
- Specification and size of matching chuck for model VP-200 is the same as model 2P.
- Specification and size of matching chuck for model VP-300 is the same as model 3P.
SKU: n/a -
AUTOSTRONG
VRA：Non through-hole power chuck for vertical lathe,V-212RA11, V-212RA15, V-212RA6, V-212RA8, V-215RA11, V-215RA15, V-215RA8, V-218RA11, V-218RA15, V-218RA8, V-221RA11, V-221RA8, V-224RA11, V-224RA15, V-224RA8, V-232RA11, V-232RA15, V-232RA20, VIT-212RA8, VIT-218RA11, VIT-224RA11, VIT-224RA15, VIT-232RA11, VIT-232RA15
AUTOSTRONGVRA：Non through-hole power chuck for vertical lathe,V-212RA11, V-212RA15, V-212RA6, V-212RA8, V-215RA11, V-215RA15, V-215RA8, V-218RA11, V-218RA15, V-218RA8, V-221RA11, V-221RA8, V-224RA11, V-224RA15, V-224RA8, V-232RA11, V-232RA15, V-232RA20, VIT-212RA8, VIT-218RA11, VIT-224RA11, VIT-224RA15, VIT-232RA11, VIT-232RA15
- Replaceable for Japanese brands. Standard product 6~10″ made of high strength alloy steel SCM440 from Japan Above 21 inches are made of FCD600. Sliding surfaces, master jaws, and interior parts are hardening and grinding. Equipped with Protected cover on the gauge of chuck face, suitable for vertical lathe. Independently moving master jaws for clamping huge irregular workpiece. Special dust and water proof. Suitable for vertical lathe.
SKU: n/a -
HERBERT
VSC Series MC Self-Centering Vise,VCS-130, VSC-100, VSC-160, VSC-200
- This vise is suitable for precision machining of four-axis, five-axis, CNC indexing plates and vertical and horizontal CNC milling machines.
- The repetitive positioning accuracy of the vise center can maintain ±0.01mm.
- The slide rail has been heat-treated with a high frequency of HRC45° or higher to maintain high wear resistance.
- The special structural design of the vise can effectively prevent the workpiece from floating when the workpiece is clamped, and the locking force is excellent.
SKU: n/a -
-
HERBERT
VSP-G：MC Power Vise-Super Long Open Type Vise,VSP-200G, VSP-250G
- Large opening 450mm，Wide Jaw Plate
- The body of the VSP constant-pressure double-force vise adopts a vertical rib structure to enhance the body’s bending resistance. It is made of cast iron with good ductility, and its strength is 3 times higher.
- Hidden floating prevention mechanism reduces the floating rate of the workpiece.
- The movable design structure is designed in the recessed groove to achieve the omnidirectional chip prevention function.
- 4. The use of oil-free double-force constant-pressure mechanical pressurization system (segmented selection), combined with the slope design, can generate more than 13 times the force, achieve the clamping effect, and never return pressure.
- After heat treatment, the working surface and the sliding surface of the movable body have a hardness of over 45 degrees HRC and high wear resistance.
- The dust-proof cover design can prevent cutting chips from blocking and attaching, and poor operation caused by iron chips.
SKU: n/a
Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.