-
×
AE：8-Jaw Awl Type Chucks,AE-09
1 × $650.00
Subtotal: $650.00
Recommended Products
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
High clamping accuracy, high speed and high rigidity.
Sealed against swarf, chips and coolant.
The collet used must accord with DIN 6343.
SKU: n/a
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
SKU: n/a
CHANDOX
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
SKU: n/a
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SKU: n/a
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
SKU: n/a
Shop
Showing 341–360 of 493 results
-
LI-HSUN
NK,NKS：LATHE ROLLING CENTER-NK A/B TYPE，NK-MT.2A, NK-MT.3A, NK-MT.3B, NK-MT.4A, NK-MT.4B, NK-MT.5A, NKS-MT.2, NKS-MT.3, NKS-MT.4
LI-HSUNNK,NKS：LATHE ROLLING CENTER-NK A/B TYPE，NK-MT.2A, NK-MT.3A, NK-MT.3B, NK-MT.4A, NK-MT.4B, NK-MT.5A, NKS-MT.2, NKS-MT.3, NKS-MT.4
- Center shaft and main body are made of bearing alloy steel and hardened to(HRC60°±1°)
- Center is assembled with thrust bearing, needle bearing and ball bearing.
- Applicable to medium and high speed laths with heavy loads.
- The tailstock pressure of lathe adjusts to five to eight kilograms (for reference)
※ NK-B TYPE: Long nose live centers are suitable for small workpieces.
SKU: n/a -
AUTOSTRONG
NL：3-jaw long stroke through-hole power chuck,NL-06A5, NL-08A6, NL-10A8
- Adapter for A2 spindle(DIN 55026) Easy to mount. CRANK structure N type extra long stroke Especially for different clamping spots of workpiece. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. The draw nut is customizable.(consult with sales) Standard product 6~10″ made of high strength alloy steel SCM440 from Japan Sliding surfaces, master jaws, and interior parts are hardening and grinding. Quick replace cover
SKU: n/a -
AUTOSTRONG
NT：2-jaw through-hole power chuck,NT-205, NT-206, NT-210, NT-212, NT-215, NT-218
- Easy to mount. Suitable for long bore or special workpiece. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. The draw nut is customizable.(consult with sales) Standard product 6~10″ made of high strength alloy steel SCM440 from Japan Above 21 inches are made of FCD600. Sliding surfaces, master jaws, and interior parts are hardening and grinding Quick replace cover
SKU: n/a -
CHANDOX
OP：3-Jaw High Speed Hollow Power Chucks,OP-204、 OP-205、 OP-206、 OP-208、 OP-210、 OP-212、 OP-215、 OP-218、 OP-221
CHANDOXOP：3-Jaw High Speed Hollow Power Chucks,OP-204、 OP-205、 OP-206、 OP-208、 OP-210、 OP-212、 OP-215、 OP-218、 OP-221
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole.
3. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 3-jaw chucks are suitable for clamping irregular workpieces.
4. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a -
CHANDOX
OPB：3-Jaw Large Through Hole High Speed Power Chuck,OPB-206、 OPB-208、 OPB-210、 OPB-212、 OPB-215、 OPB-218
CHANDOXOPB：3-Jaw Large Through Hole High Speed Power Chuck,OPB-206、 OPB-208、 OPB-210、 OPB-212、 OPB-215、 OPB-218
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole
3. By enlarging the through-hole, larger workpieces can be inserted.
4. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 4-jaw chucks are suitable for clamping irregular workpieces.
5. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a -
CHANDOX
OPF：4-Jaw High Speed Hollow Power Chucks,OPF-206、 OPF-208、 OPF-210、 OPF-212、 OPF-215、 OPF-218
CHANDOXOPF：4-Jaw High Speed Hollow Power Chucks,OPF-206、 OPF-208、 OPF-210、 OPF-212、 OPF-215、 OPF-218
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole.
3. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 3-jaw chucks are suitable for clamping irregular workpieces.
4. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a -
CHANDOX
OPL,OPT-L：2、3-Jaw Long Stroke Hollow Power Chucks,OP-206L, OP-208L, OP-210L, OPT-206L, OPT-208L, OPT-210L
CHANDOXOPL,OPT-L：2、3-Jaw Long Stroke Hollow Power Chucks,OP-206L, OP-208L, OP-210L, OPT-206L, OPT-208L, OPT-210L
1. A long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
2. For a wedge type, the clamping force is stable.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a -
CHANDOX
OPT：2-Jaw High Speed Hollow Power Chucks,OPT-204、 OPT-205、 OPT-206、 OPT-208、 OPT-210、 OPT-212、 OPT-215
CHANDOXOPT：2-Jaw High Speed Hollow Power Chucks,OPT-204、 OPT-205、 OPT-206、 OPT-208、 OPT-210、 OPT-212、 OPT-215
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole.
3. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 3-jaw chucks are suitable for clamping irregular workpieces.
4. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a -
CHANDOX
P-S：Large Through Hole Super Thin Hollow Rotary Hydraulic Cylinder
1.Super thin & Lightweight：Super thin outer structure makes the weight lighter than the traditional rotary cylinders； meanwhile, the compactness and miniaturization lower the burden of machines.
2.Large Thru-hole Diameter：With large open center, gripping range of Bar stock can be increased.
3.Built-in Check Valve：With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.SKU: n/a -
CHANDOX
P：Super High Speed Hollow Rotary Hydraulic Cylinders,P0928, P1036, P1246, P1552, P1875, P1878, P2091, P2093, P2511, P2916, P3420
CHANDOXP：Super High Speed Hollow Rotary Hydraulic Cylinders,P0928, P1036, P1246, P1552, P1875, P1878, P2091, P2093, P2511, P2916, P3420
1. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
2. Connect the through hole of cylinder, draw-bar and chuck, then adapt with bar-feeder to achieve the fast loading.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.
L:Longer strokeSKU: n/a -
LI-HSUN
PC：LATHE NORMAL CENTER-PC TYPE，PC-MT.1, PC-MT.2, PC-MT.3, PC-MT.4, PC-MT.5, PC-MT.6
- Center is made of Cr-Mo steel and hardened to HRC58°～60°
- Center is assembled with ball bearings.
- Applicable to medium and high speed lathes with light duty.
- The tailstock pressure of lathe adjusts to five to eight kilograms (for reference).
SKU: n/a -
SAFEWAY
PHV： Hydraulic Vise,PHV-130, PHV-160, PHV-200, PHV-250
Most sutible for milling machine
High and stable clamping forces, most sutible for heavy duty machinining
Clamping system: mechanical / hydraulic type
Semi-spherical segment eliminates jaw lifting and workpiece tilting
High Rigidity Material: Ductile Iron FCD 600 JIS (= GGG-60)(60kg/mm2, 80,000 psi ).SKU: n/a -
CHANDOX
PL：3-Jaw Pull Back Power Chucks,PL-06、 PL-08、 PL-10、 PL-12
Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
1.Rust-proof for Pneumatic Cylinder：Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof： Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design：Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor’t deform.SKU: n/a -
SAFEWAY
PLV： Hydraulic Vise (Long Opening),PLV-160, PLV-200, PLV-250
- Most sutible for Milling machine
- High and stable clamping forces, most sutible for heavy duty machinining
- Clamping system: mechanical / hydraulic type.
- Semi-spherical segment eliminates jaw lifting and workpiece tilting
- High Rigidity Material: Ductile Iron FCD 600 JIS (= GGG-60)(60kg/mm2, 80,000 psi ).
SKU: n/a -
CHANDOX
PLVE：3-Jaw Pull Back Power Chuck Fixtures,PLVE-06、 PLVE-08、 PLVE-10
Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
1.Rust-proof for Pneumatic Cylinder：Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design：Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor’t deform.SKU: n/a -
SAFEWAY
PQV： Pneumatic Quick Vise,PQV-100V, PQV-130V, PQV-160V, PQV-160V-L, PQV-200V
- This vise body is controlled, and always maintains the fixed height of vise body.
- Most sutible for machine centers, milling machines, drilling machines and special purpose machines, Best option for mass production
- Fast and large clamping force, only need to connect to the air compression source, no need to push with oil, to avoid oil leakage.
- Safety check valve device, the clamping force will never be loosened, safe and convenient.
- Clamping system:Powor and pneumatic type.
- Powerful material, the vise is made of high tensile spherical ductile iron (FCD600) (60kg/mm2, 80,000 psi).
- Easy and simple ON-OFF switch control for pneumatic operation (0-400kgf)
- Safety locking mechanism for protection with 4mm clamping stroke design
- Easy operation, The optional electric control for automatic and FMS system is available
SKU: n/a
