-
×
AE：8-Jaw Awl Type Chucks,AE-09
1 × $650.00
Subtotal: $650.00
Recommended Products
LI-HSUN
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1°
※ Hardened : HRC60°±1°
Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
Applicable for gear hobbing machine.
Accuracy : 0.008mm
SKU: n/a
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
High clamping accuracy, high speed and high rigidity.
Sealed against swarf, chips and coolant.
The collet used must accord with DIN 6343.
SKU: n/a
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
SKU: n/a
CHANDOX
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
SKU: n/a
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SKU: n/a
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
SKU: n/a
Shop
Showing 81–96 of 522 results
-
AUTOGRIP
4H：4-JAW LARGE THRU-HOLE POWER CHUCK,4H-12, 4H-15, 4H-18, 4H-206, 4H-208, 4H-210
- WEDGE-HOOK type 4-jaw with the extra large through-hole.
- Matching surfaces of all parts hardened, ground and lubricated directly.
- High rigidity and high repeatability precision.
- J is the hole diameter of blank draw nut,
- If not notified, Autogrip will adopt the K Default as K value.
- K max is the maximum thread specification, and it could be customize.
SKU: n/a -
AUTOGRIP
4T：4 Jaw Two Motion Type Independent Chuck,4T-08, 4T-10, 4T-12, 4T-15
- CRANK type with two pairs of 2 jaws self-center independent of each other.
- The 4T series jaw chuck is suitable for square bars and other nonuniform-shaped workpieces.
- Precisely center cylindrical stock to within the limits of the lathe’s accuracy.
- Form rectangular shaped objects.
SKU: n/a -
AUTOWELL
ACB：MC POWER VISES SYSTEM,ACB-055, ACB-075, ACB-125, ACB-215, ACB-325
Can do 5 Face Machining, Increase Suction, Improve Efficiency1. The all new model Magnetic Clamping Block ACB Series are a new sense of clamping way
for metal working on CNC Machining Center and Milling Machine in quick clamp workpieces.
It can fit well with 5 face machining. Youcan do drilling, tapping, slotting in one time.
Also reduce lots of steps, costs and improve efficiency.2. Free to set up position, numbers and distance of Magnetic Clamping Block according
to the size of workpiece.3. The ACB Series including changeable Induction Soft Block. It can be revised the surface
to be 100% accuracy on the machine for clamp workpieces. Can be also cutting, drilling,
tapping and slotting directly to the Induction Soft Block during machining workpiece.
Multi-function of Induction Soft Block, the user can make it by themselves according to workpiece required.1. Most suitable for medium and large size of workpiece machining on milling machine and CNC machining center.
2. Changeable Induction Soft Block can do multi-function clamping.
3. Minimum size of workpiece required as bigger than an area of two Magnetic Clamping Blocks.
4. The Magnetic Clamping Blocks are not suitable for small workpiece clamping.SKU: n/a -
HOMGE
ACM：FIVE-AXIS COMPACT MULTI-POWER VISE,ACM-130, ACM-160
- Compact design with big jaw opening, which enhances machine space utilization.
- 2.Vise jaws are made of High quality Tool Steel (SCM440) and Hardened to achieve HRC 55 , which makes vise clamp the workpieces easily and firmly.
- 3.Vise body is made of Ductile lron above FCD 60 grade and its slideways are hardened to HRC 52 , which makes the vise tensile strength with high precision accuracy.
- 4.The patented MULTI-POWER SYSTEM is built of high grade BEARING STEEL which doubles the clamping force. Adjustable clamping force 5000kg. With this special patented system the pressure is more consistent and eliminates oil leakage and maintenance problems associated with Hydraulic Vises.
- 5.Special Leadscrew Covers protect Leadscrew from swarf and avoid any possible damage to internal parts.
SKU: n/a -
AUTOWELL
ACR：MC POWER VISES SYSTEM,ACR-125G/HV, ACR-160G/HV
- Most suitable for VMC & HMC and owns 2 patents.
- Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
- Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
- Unique Out-jaw design increase the clamping capacity.
- Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
- Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
ADX：WELLOCK LARGE OPENING VISE,ADX-100, ADX-160(IN), ADX-160(M), ADXR-100, ADXR-160(IN), ADXR-160(M), EDX-160(IN), EDXR-160(IN)
AUTOWELLADX：WELLOCK LARGE OPENING VISE,ADX-100, ADX-160(IN), ADX-160(M), ADXR-100, ADXR-160(IN), ADXR-160(M), EDX-160(IN), EDXR-160(IN)
1. 9″ large opening
2. Spindle nut does not protrude past the end of the body.
3. Same distance from keyway to stationary jaw with ATW-689.
4. Bed heigh 73.025±0.012mm(2.875 ±0.0005″).
5. Anti-lift inside. Wellock Semi-spherical segment eliminate deflection and lift.
6. Rigid and tensile ductile iron FCD-60(80,000PSI) vise body.
7. USA Patent. No. US:D838,5685SKU: n/a
Recommended Products
LI-HSUN
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1°
※ Hardened : HRC60°±1°
Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
Applicable for gear hobbing machine.
Accuracy : 0.008mm
SKU: n/a
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
High clamping accuracy, high speed and high rigidity.
Sealed against swarf, chips and coolant.
The collet used must accord with DIN 6343.
SKU: n/a
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
SKU: n/a
CHANDOX
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
SKU: n/a
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SKU: n/a
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
SKU: n/a