Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 417–432 of 522 results
-
YTUM
RZ11：One-piece Jaws,RD-160, RD-200, RD-250, RD-315, RD-325, RD-380, RD-400, RD-500, RD-630, RD-800, RDX-160, RDX-200, RDX-250, RDX-315, RDX-380, RDX-400, RDX-500, RDX-630, RDX-800, RZ11-100, RZ11-125, RZ11-130, RZ11-160, RZ11-165, RZ11-190, RZ11-200, RZ11-240, RZ11-250, RZ11-315/320/325/380, RZ11-400, RZ11-500, RZ11-630, RZ11-80
YTUMRZ11：One-piece Jaws,RD-160, RD-200, RD-250, RD-315, RD-325, RD-380, RD-400, RD-500, RD-630, RD-800, RDX-160, RDX-200, RDX-250, RDX-315, RDX-380, RDX-400, RDX-500, RDX-630, RDX-800, RZ11-100, RZ11-125, RZ11-130, RZ11-160, RZ11-165, RZ11-190, RZ11-200, RZ11-240, RZ11-250, RZ11-315/320/325/380, RZ11-400, RZ11-500, RZ11-630, RZ11-80
SKU: n/a -
SHINE
SC-60： HEAVY DUTY HIGH SPEED STRONG LIVE CENTER，SC-60-H-4, SC-60-H-5, SC-60-H-6A
Type: Live centers series
Duty: HeavyApplication: CNC heavy duty lathe, heavy duty high speed lathe
Working Usage: Applicable for the long workpiece heavy duty turning process
Structure: Combination of angular contact precise high speed ball bearing and needle bearing, with the design of three supporting points
Accessories: For SC-60-H-6A: special Y type spanner
TIR: Less than 0.002mm
SKU: n/a -
SHINE
SC-61-A：INTERCHANGEABLE MEDIUM DUTY LIVE CENTER，SC-61-M-3, SC-61-M-3A, SC-61-M-4, SC-61-M-4A, SC-61-M-5, SC-61-M-5A
SHINESC-61-A：INTERCHANGEABLE MEDIUM DUTY LIVE CENTER，SC-61-M-3, SC-61-M-3A, SC-61-M-4, SC-61-M-4A, SC-61-M-5, SC-61-M-5A
Type: Interchangeble live center
Duty: MediumApplication CNC lathe and high speed lathe or other lathe machine.
Working Usage : Applicable for the length less than 400mm ordinary turning process.
Structure The radial load and axial load designed separately. Combination of double row ball bearing and thrust bearing and needle bearing.
Accessories: For SC-61-M-3A/4A/5A, Y spanner and 61 type Tips and 61 type pin punch.
TIR Less than 0.005mm
SKU: n/a -
SHINE
SC-62-A： HEAVY DUTY LIVE CENTER，SC-62-H-3, SC-62-H-3A, SC-62-H-4, SC-62-H-4A, SC-62-H-5, SC-62-H-5A
SHINESC-62-A： HEAVY DUTY LIVE CENTER，SC-62-H-3, SC-62-H-3A, SC-62-H-4, SC-62-H-4A, SC-62-H-5, SC-62-H-5A
Type: Live centers series
Duty: HeavyApplication: CNC lathe, high speed lathe, other lathe machine
Working Usage: Applicable for the length less than 400mm ordinary stong turning process
Structure: Combination of double row precise ball bearing and thrust bearing and needle bearing
Accessories: For SC-62-H-4A/5A :Y type spanner
TIR: Less than 0.002mm
SKU: n/a -
SHINE
SC-63-A ：MEDIUM DUTY LONG NOSE LIVE CENTER WITH DRAW-OFF NUT，SC-63-M-3, SC-63-M-3A, SC-63-M-4, SC-63-M-4A, SC-63-M-5, SC-63-M-5A
SHINESC-63-A ：MEDIUM DUTY LONG NOSE LIVE CENTER WITH DRAW-OFF NUT，SC-63-M-3, SC-63-M-3A, SC-63-M-4, SC-63-M-4A, SC-63-M-5, SC-63-M-5A
Type: Live centers series
Duty: MediumApplication CNC lathe, high speed lathe and other lathe.
Working Usage Applicable for the length less than 400mm ordinary turning process, and slender workpiece turning process.
Structure The radial load and axial load designed separately. Adopted double row ball precision bear and thrust bearing and needle bearing.
Accessories For SC-63-M-3A/4A/5A, Y type spanner
TIR Less than 0.002mm
SKU: n/a -
SHINE
SC-66-A： CHANGEABLE SELF COMPENSATING FACE DRIVER，SC-66-A-3A, SC-66-A-3B, SC-66-A-3C, SC-66-A-4A, SC-66-A-4B, SC-66-A-5A, SC-66-A-5B, SC-66-A-5C, SC-66-B-40A, SC-66-B-40B, SC-66-B-40C
SHINESC-66-A： CHANGEABLE SELF COMPENSATING FACE DRIVER，SC-66-A-3A, SC-66-A-3B, SC-66-A-3C, SC-66-A-4A, SC-66-A-4B, SC-66-A-5A, SC-66-A-5B, SC-66-A-5C, SC-66-B-40A, SC-66-B-40B, SC-66-B-40C
Type: Face driving center,Compensating pins type
Application: CNC lathe and high speed lathe and auto feeder or other machine tool
Working Usage: Without turning the workpiece face and each drive pin can adjust the transmission force,better precision and stability for turning and reversing lathing process
Structure: Adopted the design of mechanical balance structure
TIR: Less than 0.005mm
Inspecting the run out accuracy of the center tip must be under the status of holding the workbar tightly.
Accessories: For SC-66-A group, center pins 09-09 and drive pins 10-10
For SC-66-B group, center pins 09-09 and drive pins 10-13
For SC-66-C group, center pins 09-06 and drive pins 10-17
SKU: n/a -
SHINE
SC-69-A： MEDIUM DUTY LIVE CENTER WITH DRAW-OFF NUT，SC-69-M-3, SC-69-M-3A, SC-69-M-4, SC-69-M-4A, SC-69-M-5, SC-69-M-5A
SHINESC-69-A： MEDIUM DUTY LIVE CENTER WITH DRAW-OFF NUT，SC-69-M-3, SC-69-M-3A, SC-69-M-4, SC-69-M-4A, SC-69-M-5, SC-69-M-5A
Type: Live centers series
Duty: MediumApplication: CNC lathe, high speed lathe and other lathe.
Working Usage: Applicable for the length less than 400mm ordinary turning process, and slender workpiece turning process.
Structure The radial load and axial load designed separately. Adopted double row ball precision bear and thrust bearing and needle bearing.
Accessories For SC-69-M-3A/4A/5A, Y type spanner
TIR Less than 0.002mm
SKU: n/a -
AUTOSTRONG
SC：3-jaw scroll chuck plain back,solid jaws,SC-10, SC-12, SC-16, SC-3, SC-4, SC-5, SC-6, SC-7, SC-8, SC-9
AUTOSTRONGSC：3-jaw scroll chuck plain back,solid jaws,SC-10, SC-12, SC-16, SC-3, SC-4, SC-5, SC-6, SC-7, SC-8, SC-9
- Front and back mounted (SC-16 excluded). Easy to install Self-centering chuck improve efficiency. Interchangeable utilization of internal and external hard jaws for widely clamping methods SC self-centering scroll chuck feature economical and durable, especially suitable for mass production. Gripping accuracy of 0.03mm (0.0012 inch) T.I.R.. The body is made of highly strength and durability MEEHANITE. It is suitably used for high speed revolution also durable 3 times more than regular material.
SKU: n/a
Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.