Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 353–368 of 522 results
-
AUTOSTRONG
N：3-jaw through-hole power chuck (adapter excluded),N-204, N-205, N-206, N-208, N-210, N-212, N-215, N-218, N-220, N-224, N-232
AUTOSTRONGN：3-jaw through-hole power chuck (adapter excluded),N-204, N-205, N-206, N-208, N-210, N-212, N-215, N-218, N-220, N-224, N-232
- Easy to mount. Suitable for long bore or special workpiece. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. The draw nut is customizable.(consult with sales) Standard product 6~10″ made of high strength alloy steel SCM440 from Japan Above 21 inches are made of FCD600. Sliding surfaces, master jaws, and interior parts are hardening and grinding Quick replace cover
SKU: n/a -
CHANDOX
NBK：Powerful Type Super Thin Chucks,NBK-06, NBK-08, NBK-10, NBK-12, NBK-16, NBK-20
1.The handle with an angle of 30 degrees is much convenient for operations.。
2.The “super thin thickness” design of chucks increase the “allowable distance” of machining operations.
3.Chuck flange makes loading and unloading Operations simpler and more convenient.
4.Hard jaws and soft jaws can be used alternatively.SKU: n/a -
LI-HSUN
NC/NCD：LATHE MEDIUM-LOAD CENTER-NC TYPE,NC-MT.4A, NC-MT.4B, NC-MT.5A, NC-MT.5B, NCD-MT.4, NCD-MT.5
LI-HSUNNC/NCD：LATHE MEDIUM-LOAD CENTER-NC TYPE,NC-MT.4A, NC-MT.4B, NC-MT.5A, NC-MT.5B, NCD-MT.4, NCD-MT.5
- Front end is fitted with angular contact ball bearing, thrust bearing and needle bearing.
- Suitable for CNC lathes at high-speed and medium-load. The waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
SKU: n/a -
LI-HSUN
NCF/NCFP：LATHE HEAVY-LOAD CENTER-NCF TYPE,NCF-MT.3A, NCF-MT.3B, NCF-MT.4A, NCF-MT.4B, NCF-MT.5A, NCFP-MT.4, NCFP-MT.5
LI-HSUNNCF/NCFP：LATHE HEAVY-LOAD CENTER-NCF TYPE,NCF-MT.3A, NCF-MT.3B, NCF-MT.4A, NCF-MT.4B, NCF-MT.5A, NCFP-MT.4, NCFP-MT.5
- The shaft is made of alloy steel and through vacuum heat treatment (HRC60°±1°). It possesses great rigidity and high durability.
- Front end is fitted with angular contact ball bearing & thrust bearing. Middle & Rear needle bearing and the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
SKU: n/a -
SHINE
NCH-61：INTERCHANGEABLE MEDIUM DUTY PRECISION HIGH SPEED LIVE CENTER，NCH-61-3A, NCH-61-4A, NCH-61-5A
SHINENCH-61：INTERCHANGEABLE MEDIUM DUTY PRECISION HIGH SPEED LIVE CENTER，NCH-61-3A, NCH-61-4A, NCH-61-5A
1,For the lubricating oil,SKF-LGMT2 is designated,others aren’t allowed
2,if “A” is behind the center model name,it denotes a draw-off nut attached.
3,About radial force data, please refer to workpiece weight and machining force.
4,if “A” is behind the center interchangeable tip name,it denotes the tip is extended length.
5,About axial force data, please refer to the hydraulic pressure data of the tailstock.
6,For live centers, SKF lubricating oil is designated, it is waterproof.
7,Customized order can be accepted.
8,Subject to technical changes.SKU: n/a -
SHINE
NCH-62 ：HEAVY DUTY PRECISE HIGH SPEED LIVE CENTER，NCH-62-3A, NCH-62-4A, NCH-62-5A
Type: Live centers series
Duty: HeavyApplication: CNC lathe, high speed lathe
Working Usage: Applicable for high speed and high precision workpiece turning process
Structure: Combination of angular contact ball precise high speed bearing and needle bearing
Accessories: Y type spanner
TIR: Less than 0.002mm
SKU: n/a -
LI-HSUN
NCH：LATHE HIGH-SPEED, WATER-PROOF CENTER-NCH TYPE,NCH-MT.2A, NCH-MT.3A, NCH-MT.3B, NCH-MT.4A, NCH-MT.4B, NCH-MT.5A, NCH-MT.5B, NCH-MT.6A
LI-HSUNNCH：LATHE HIGH-SPEED, WATER-PROOF CENTER-NCH TYPE,NCH-MT.2A, NCH-MT.3A, NCH-MT.3B, NCH-MT.4A, NCH-MT.4B, NCH-MT.5A, NCH-MT.5B, NCH-MT.6A
- Center shaft is made of alloy steel and hardened through vacuum heat treatment to provide higher rigidity HRC60°±1°
- Center is fitted with dual ball bearing, thrust bearing and needle roller bearing assembly, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
SKU: n/a -
LI-HSUN
NCK：LATHE CENTER HIGH-PERFORMANCE-NCK TYPE，NCK-MT.2A, NCK-MT.3A, NCK-MT.3B, NCK-MT.4A, NCK-MT.4B, NCK-MT.5A, NCK-MT.5B, NCK-MT.6A
LI-HSUNNCK：LATHE CENTER HIGH-PERFORMANCE-NCK TYPE，NCK-MT.2A, NCK-MT.3A, NCK-MT.3B, NCK-MT.4A, NCK-MT.4B, NCK-MT.5A, NCK-MT.5B, NCK-MT.6A
- The shaft is made of alloy steel and through vacuum heat treatment HRC60°±1°. It processes great rigidity and high durability.
- The center uses the combination of roller bearings, thrust ball bearing, the tailstock pressure of lathe adjusts to five to eight kilograms (for reference).
※ NCK-B type: Long nose live centers are suitable for small workpieces.
SKU: n/a -
LI-HSUN
NCR：LATHE ADJUSTMENT WATER-PROOF CENTER-NCR TYPE，NCR-MT.3A, NCR-MT.3B, NCR-MT.4A, NCR-MT.4B, NCR-MT.5A, NCR-MT.5B, NCR-MT.6A
LI-HSUNNCR：LATHE ADJUSTMENT WATER-PROOF CENTER-NCR TYPE，NCR-MT.3A, NCR-MT.3B, NCR-MT.4A, NCR-MT.4B, NCR-MT.5A, NCR-MT.5B, NCR-MT.6A
- The shaft uses alloy steel and hardened through vacuum heat treatment to (HRC60°±1°).
- Uses the combination of taper roller bearing, thrust bearing and needle bearing.
- Applicable to medium and heavy loads, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
- Adjustable to reach original loading capacity after using for a long period of time.
SKU: n/a -
LI-HSUN
NCS：INTERCHANGEABLE HIGH-SPEED LIVE CENTER (WITH NUT),NCS-MT.3, NCS-MT.4, NCS-MT.4P, NCS-MT.4PT, NCS-MT.4T, NCS-MT.5P, NCS-MT.5PT
LI-HSUNNCS：INTERCHANGEABLE HIGH-SPEED LIVE CENTER (WITH NUT),NCS-MT.3, NCS-MT.4, NCS-MT.4P, NCS-MT.4PT, NCS-MT.4T, NCS-MT.5P, NCS-MT.5PT
- Center shaft is made of alloy steel and hardened through vacuum heat treatment to provide higher rigidity HRC60°±1°
- Center is fitted with dual ball bearing, thrust bearing and needle roller bearing assembly, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
SKU: n/a -
LI-HSUN
NHD：LATHE AUTO ADJUSTABLE TRANSMISSION CENTER-NHD TYPE，NHD31 MT.4, NHD32 MT.4, NHD33 MT.4, NHD34 MT.4
LI-HSUNNHD：LATHE AUTO ADJUSTABLE TRANSMISSION CENTER-NHD TYPE，NHD31 MT.4, NHD32 MT.4, NHD33 MT.4, NHD34 MT.4
LATHE AUTO ADJUSTABLE TRANSMISSION CENTER-NHD TYPE
- Suitable for the asperities of the workpieces. The auto adjustable transmission center with 5T and 6T design on end surface is able to adjust the stress point so that the workpieces will be done easily.
- The inside structure of the center is comprised of PU. It is nearly free of break-down and is durable and easy to fix.
- Accuracy : 0.008mm
SKU: n/a -
AUTOSTRONG
NHT：2-jaw and 3-jaw through-hole power chuck,NHT-208A5, NHT-208A6
- Easy to mount. Suitable for long bore or special workpiece. No need to replace chucks for different dimension of workpiece. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. The draw nut is customizable.(consult with sales) Standard product 6~10″ made of high strength alloy steel SCM440 from Japan Above 21 inches are made of FCD600. Sliding surfaces, master jaws, and interior parts are hardening and grinding. Quick replace cover
SKU: n/a -
AUTOSTRONG
NIT：4-jaw through-hole power chuck,NIT-206, NIT-208, NIT-210, NIT-212, NIT-215, NIT-218, NIT-224
AUTOSTRONGNIT：4-jaw through-hole power chuck,NIT-206, NIT-208, NIT-210, NIT-212, NIT-215, NIT-218, NIT-224
- Easy to mount. Suitable for long bore or special workpiece. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. The draw nut is customizable.(consult with sales) Standard product 6~10″ made of high strength alloy steel SCM440 from Japan Above 21 inches are made of FCD600. Sliding surfaces, master jaws, and interior parts are hardening and grinding Quick replace cover
SKU: n/a -
LI-HSUN
NK,NKS：LATHE ROLLING CENTER-NK A/B TYPE，NK-MT.2A, NK-MT.3A, NK-MT.3B, NK-MT.4A, NK-MT.4B, NK-MT.5A, NKS-MT.2, NKS-MT.3, NKS-MT.4
LI-HSUNNK,NKS：LATHE ROLLING CENTER-NK A/B TYPE，NK-MT.2A, NK-MT.3A, NK-MT.3B, NK-MT.4A, NK-MT.4B, NK-MT.5A, NKS-MT.2, NKS-MT.3, NKS-MT.4
- Center shaft and main body are made of bearing alloy steel and hardened to(HRC60°±1°)
- Center is assembled with thrust bearing, needle bearing and ball bearing.
- Applicable to medium and high speed laths with heavy loads.
- The tailstock pressure of lathe adjusts to five to eight kilograms (for reference)
※ NK-B TYPE: Long nose live centers are suitable for small workpieces.
SKU: n/a
Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.