AUTOGRIP
Showing 21–40 of 56 results
-
AUTOGRIP
CBD：Dead Length Collet Chuck,CBD-52, CBD-5212, CBD-5217, CBD-52A5, CBD-52A6, CBD-65, CBD-6514, CBD-65A5, CBD-65A6, CBD-65A8
AUTOGRIPCBD：Dead Length Collet Chuck,CBD-52, CBD-5212, CBD-5217, CBD-52A5, CBD-52A6, CBD-65, CBD-6514, CBD-65A5, CBD-65A6, CBD-65A8
- The push-forward clamping, combined with a stop block mechanism, features radial clamping with zero radial displacement, enabling precise positioning of the workpiece feeding length for improved length accuracy control.
- AUTOGRIP rubber tube clamping eliminates forward pushing, minimizing surface damage.
- Interchangeable workpiece stopper and dust cover enable through-hole applications and chip protection, suitable for sub-spindle clamping, reducing tension and compression.
- J is the hole diameter of the blank draw nut.
- K is the maximum thread specification and it could be customized.
SKU: n/a -
AUTOGRIP
CBE/CBEA：End stop Collet Chuck,CBE-42, CBE-4212, CBE-42A5, CBE-42A6, CBE-52, CBE-5212, CBE-5217, CBE-52A5, CBE-52A6, CBE-65, CBE-6514, CBE-65A5, CBE-65A6, CBE-65A8
AUTOGRIPCBE/CBEA：End stop Collet Chuck,CBE-42, CBE-4212, CBE-42A5, CBE-42A6, CBE-52, CBE-5212, CBE-5217, CBE-52A5, CBE-52A6, CBE-65, CBE-6514, CBE-65A5, CBE-65A6, CBE-65A8
The pull-back positioning clamping, combined with the workpiece stop block mechanism, features radial clamping and axial fine-tuning torque, enabling precise positioning of the workpiece feeding length for enhanced length accuracy control.
The blocking block and dust cover can be swapped for versatile use and chip protection.
J is the hole diameter of blank draw nut.
K is the maximum thread specification and it could be customize.The blocking block and dust cover can be swapped for versatile use and chip protection.
J is the hole diameter of blank draw nut.
K is the maximum thread specification and it could be customize.SKU: n/a -
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
AUTOGRIPCL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
- PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
- High clamping accuracy, high speed and high rigidity.
- Sealed against swarf, chips and coolant.
- The collet used must accord with DIN 6343.
SKU: n/a -
AUTOGRIP
CL：Collet Chuck,CL-26, CL-30, CL-36, CL-42, CL-52, CL-6017, CL-6022, CL-80
- PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
- High clamping accuracy, high speed and high rigidity.
- Sealed against swarf, chips and coolant.
- The collet used must accord with DIN 6343.
SKU: n/a -
-
AUTOGRIP
FA：Single Slide Facing Head,FA-1570, FA-615, FA-830
- Feed mechanism is transmitted by Rack and Pinion or Wedge Plunger, with steady feed speed. Simple adjustment for feed speed and stroke.
- Matching surfaces of all parts hardened, grounding and lubricated directly. With rigidity and durability.
- Stopper accurancy: ±0.03mm.
- Suitable for using with RS type cylinder.
SKU: n/a -
AUTOGRIP
FA：Single Slide Facing Head,FA-408, FA-610, FA-812
- The feed mechanism is Wedge Plunger, with a steady feed speed. Simple adjustment for feed speed and stroke.
- Matching surfaces of all parts hardened, grounded, and lubricated directly. With rigidity and durability.
- Stopper accuracy: ±0.03mm.
- Suitable for use with RS-type cylinder.
- For precision processes, Wedge Plunger type facing heads are suitable for use with electro-servo and ball screw mechanisms.
SKU: n/a -
AUTOGRIP
FD：Double Slide Facing Head，FD-1060, FD-632, FD-840
- Feed mechanism is transmitted by Crank with steady feed speed. Simple adjustment for feed speed and stroke.
- Matching surfaces of all parts hardened, grounding and lubricated directly. With rigidity and durability.
- Stopper accurancy: ±0.03mm.
- Suitable for using with RS type cylinder.
SKU: n/a -
AUTOGRIP
RA：Rotary Pneumatic Cylinder,RA-100, RA-130, RA-17, RA-220, RA-270
- The rotary valve and cylinder body, all made of special light alloy, are light-weight.
- Through unique design, the rotary valve can considerably reduce the waste in compressing air and efficiently increase its utilization.
- When used, a little oil mist should be contained.
SKU: n/a -
AUTOGRIP
RC：Hydraulic Cylinder with Rotating Joint,RC-100, RC-125, RC-145, RC-200, RC-85
-
Center through-hole hydraulic cylinder, suitable for horizontal CNC lathes.
-
Can choose an external rotary joint with either single or double paths.
-
It meets the demand for coolant through spindle and airtight pressure detect function.
-
Has a buil-in check valve for safety.
-
Stroke control via proximity switch or linear positioning system
SKU: n/a -
-
AUTOGRIP
RE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A110, RE-A120, RE-A130
AUTOGRIPRE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A110, RE-A120, RE-A130
- For short form, lightweight, and high-speed rotary cylinder. To allow compressed air to be fed from the rear end of the distributor through the rotating union, suitable for the vertical lathe.
- Built-in safety check valves, pressure relief valves, and proximity sensors.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to the oil tank to avoid back pressure.
- When used, a little oil mist should be contained.
- The rotary cylinder should not run without air passing through the air port.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A150, RE-A200K, RE-A200L, RE-A250
AUTOGRIPRE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A150, RE-A200K, RE-A200L, RE-A250
- For short form, light weight and high speed rotary cylinder. To allow compressed air to be feed from the rear end of the distributor through the rotating union, suitable for vertical lathe.
- Built-in safety check valves, pressure relief valves and proximity sensor.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to the oil tank to avoid back pressure.
- When used, a little oil mist should be contained.
- The rotary cylinder should not run without air passing through the air port.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RE-L：Compact style Rotary Hydraulic Cylinder with Coolant Connection and Safety Device
- For short form, light weight and high speed rotary cylinder. To allow coolant to be feed from the rear end of the distributor through the rotating union.
- Built-in safety check valves, pressure relief valves and proximity sensor.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- The rotary cylinder should not run without liquid through coolant port.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RE：Compact style Rotary Hydraulic Cylinder with Stroke Control and Safety Device,RE-110, RE-120, RE-130
AUTOGRIPRE：Compact style Rotary Hydraulic Cylinder with Stroke Control and Safety Device,RE-110, RE-120, RE-130
- For short form, light weight and high speed rotary cylinder, suitable for vertical lathe.
- Built-in safety check valves, pressure relief valves and proximity sensor.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RH：Hydraulic Rotary Cylinder,RH-100, RH-125, RH-200, RH-65, RH-80
- High speed cylinder with the rotary valve and cylinder body, all made of special light alloy, light-weight.
- Hydraulic rotary cylinder through unique design, the rotary valve enables the inside bearing to get sufficient lubricating and cooling and endure high-speed rotary for longer service life.
- The drain port should be independently connected to the oil tank to avoid back pressure.
SKU: n/a -
AUTOGRIP
RJ：Coolant Rotating Joint,RJ-80, RJ-92
- Coolant joint for high speed, high pressure and medium delivery.
- Usable for oil and water-soluble coolant.
- Seal bushing inside is made of cemented carbide and ceramics, which provide higher wear-resistance.
- The joint should not run without liquid through coolant port.
SKU: n/a -
AUTOGRIP
RK-N：Short type Rotary Hydraulic Cylinder，RK-100N, RK-125N, RK-150N, RK-200N, RK-250, RK75N
- For short form, light weight and high speed rotary cylinder.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
SKU: n/a
