MAKE A STATEMENT
UP TO 10% OFF
MAKE A STATEMENT
UP TO 20% OFF
-
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.SKU: n/a -
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
CHANDOXMO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.SKU: n/a -
CHANDOX
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.SKU: n/a -
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.SKU: n/a
-
CHANDOX
OP：3-Jaw High Speed Hollow Power Chucks,OP-204、 OP-205、 OP-206、 OP-208、 OP-210、 OP-212、 OP-215、 OP-218、 OP-221
CHANDOXOP：3-Jaw High Speed Hollow Power Chucks,OP-204、 OP-205、 OP-206、 OP-208、 OP-210、 OP-212、 OP-215、 OP-218、 OP-221
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole.
3. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 3-jaw chucks are suitable for clamping irregular workpieces.
4. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a -
AUTOGRIP
3H：LARGE THRU-HOLE POWER CHUCK,3H-204、 3H-205、 3H-206、 3H-208、 3H-210、 3H-212、 3H-215
- WEDGE-HOOK type 3-jaw with the extra large through-hole.
- Matching surfaces of all parts hardened, ground and lubricated directly.
- High rigidity and high repeatability precision.
- J is the hole diameter of blank draw nut,
- If not notified, Autogrip will adopt the K Default as K value.
- K max is the maximum thread specification, and it could be customize.
SKU: n/a -
CHANDOX
PL：3-Jaw Pull Back Power Chucks,PL-06、 PL-08、 PL-10、 PL-12
Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
1.Rust-proof for Pneumatic Cylinder：Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof： Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design：Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor’t deform.SKU: n/a -
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.SKU: n/a -
CHANDOX
OPT：2-Jaw High Speed Hollow Power Chucks,OPT-204、 OPT-205、 OPT-206、 OPT-208、 OPT-210、 OPT-212、 OPT-215
CHANDOXOPT：2-Jaw High Speed Hollow Power Chucks,OPT-204、 OPT-205、 OPT-206、 OPT-208、 OPT-210、 OPT-212、 OPT-215
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole.
3. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 3-jaw chucks are suitable for clamping irregular workpieces.
4. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a -
CHANDOX
OPF：4-Jaw High Speed Hollow Power Chucks,OPF-206、 OPF-208、 OPF-210、 OPF-212、 OPF-215、 OPF-218
CHANDOXOPF：4-Jaw High Speed Hollow Power Chucks,OPF-206、 OPF-208、 OPF-210、 OPF-212、 OPF-215、 OPF-218
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole.
3. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 3-jaw chucks are suitable for clamping irregular workpieces.
4. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a
Products Grid
Best Sellers
-
AUTOSUPERSCV：Self Centering Vise,SCV12710, SCV1275, SCV1276, SCV1278, SCV15010, SCV764
$650.00 – $1,500.00 This product has multiple variants. The options may be chosen on the product page -
CHANDOXHJ：Hard Jaws (HJ-Series) For Hydraulic Chucks,HJ-04, HJ-05, HJ-06, HJ-08, HJ-10, HJ-12, HJ-12-1, HJ-15, HJ-15-1, HJ-18, HJ-21
$150.00 – $400.00 This product has multiple variants. The options may be chosen on the product page -
AUTOGRIPTR：Short type Thru-Hole Rotary Hydraulic Cylinder with Safety Device,TR-1075, TR-539, TR-646, TR-853
$899.00 – $1,399.00 This product has multiple variants. The options may be chosen on the product page -
AUTOSTRONGN：3-jaw through-hole power chuck (adapter excluded),N-204, N-205, N-206, N-208, N-210, N-212, N-215, N-218, N-220, N-224, N-232
$599.00 – $5,899.00 This product has multiple variants. The options may be chosen on the product page -
CHANDOXSE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
$280.00 – $600.00 This product has multiple variants. The options may be chosen on the product page -
CHANDOXPSK：4-Jaw Powerful Type Scroll Chucks,PSK-07, PSK-09, PSK-12, PSK-16, PSK-20, PSKB-25
$600.00 – $6,000.00 This product has multiple variants. The options may be chosen on the product page -
AUTOGRIP2M：WEDGE-HOOK type Long Stroke 2 Jaw Lathe Chuck,2M-05, 2M-06, 2M-08, 2M-10, 2M-12
$699.00 – $1,499.00 This product has multiple variants. The options may be chosen on the product page -
AUTOGRIPRE-L：Compact style Rotary Hydraulic Cylinder with Coolant Connection and Safety Device
$1,059.00 – $1,459.00 This product has multiple variants. The options may be chosen on the product page
-
AUTOSTRONGMK：Super high speed through-hole compact rotary hydraulic cylinder
$850.00 – $1,800.00 This product has multiple variants. The options may be chosen on the product page -
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
$800.00 – $2,300.00 This product has multiple variants. The options may be chosen on the product page -
CHANDOX4DAKT：4-Jaw Powerful Adjustment Steel Body Chucks,4DAKT-08, 4DAKT-10, 4DAKT-12, 4DAKT-15
$800.00 – $2,900.00 This product has multiple variants. The options may be chosen on the product page -
AUTOGRIPCL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
$500.00 – $1,299.00 This product has multiple variants. The options may be chosen on the product page -
AUTOGRIPRV：Hydraulic Rotary Valve,RV-31H, RV-A31H
$500.00 – $550.00 This product has multiple variants. The options may be chosen on the product page -
CHANDOXNBK：Powerful Type Super Thin Chucks,NBK-06, NBK-08, NBK-10, NBK-12, NBK-16, NBK-20
$600.00 – $3,500.00 This product has multiple variants. The options may be chosen on the product page -
CHANDOXSJ：Soft Jaws (SJ-Series) For Hydraulic Chucks,SJ-04, SJ-05, SJ-06, SJ-08, SJ-10, SJ-12, SJ-15, SJ-21
$20.00 – $100.00 This product has multiple variants. The options may be chosen on the product page -
AUTOGRIPRK：Short type Rotary Hydraulic Cylinder with Safety Device,RK-100, RK-125, RK-150, RK-200, RK-250, RK-75
$259.00 – $899.00 This product has multiple variants. The options may be chosen on the product page
-
AUTOSTRONGNT：2-jaw through-hole power chuck,NT-205, NT-206, NT-210, NT-212, NT-215, NT-218
$799.00 – $4,299.00 This product has multiple variants. The options may be chosen on the product page -
CHANDOX
OPT：2-Jaw High Speed Hollow Power Chucks,OPT-204、 OPT-205、 OPT-206、 OPT-208、 OPT-210、 OPT-212、 OPT-215
$800.00 – $2,500.00 This product has multiple variants. The options may be chosen on the product page -
CHANDOXA1（A2)：3-Jaw A1(A2) Type Chucks,A15-08, A16-08, A16-10, A211-20
$600.00 – $3,000.00 This product has multiple variants. The options may be chosen on the product page -
AUTOGRIP3N：Inclined Master Jaws Power Chuck,3N-06, 3N-08, 3N-10
$1,800.00 – $2,800.00 This product has multiple variants. The options may be chosen on the product page
Recently Added
OP：3-Jaw High Speed Hollow Power Chucks,OP-204、 OP-205、 OP-206、 OP-208、 OP-210、 OP-212、 OP-215、 OP-218、 OP-221
OP：3-Jaw High Speed Hollow Power Chucks,OP-204、 OP-205、 OP-206、 OP-208、 OP-210、 OP-212、 OP-215、 OP-218、 OP-221
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole.
3. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 3-jaw chucks are suitable for clamping irregular workpieces.
4. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
3H：LARGE THRU-HOLE POWER CHUCK,3H-204、 3H-205、 3H-206、 3H-208、 3H-210、 3H-212、 3H-215
PL：3-Jaw Pull Back Power Chucks,PL-06、 PL-08、 PL-10、 PL-12
Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
1.Rust-proof for Pneumatic Cylinder：Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof： Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design：Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor’t deform.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
OPT：2-Jaw High Speed Hollow Power Chucks,OPT-204、 OPT-205、 OPT-206、 OPT-208、 OPT-210、 OPT-212、 OPT-215
OPT：2-Jaw High Speed Hollow Power Chucks,OPT-204、 OPT-205、 OPT-206、 OPT-208、 OPT-210、 OPT-212、 OPT-215
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole.
3. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 3-jaw chucks are suitable for clamping irregular workpieces.
4. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
OPF：4-Jaw High Speed Hollow Power Chucks,OPF-206、 OPF-208、 OPF-210、 OPF-212、 OPF-215、 OPF-218
OPF：4-Jaw High Speed Hollow Power Chucks,OPF-206、 OPF-208、 OPF-210、 OPF-212、 OPF-215、 OPF-218
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole.
3. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 3-jaw chucks are suitable for clamping irregular workpieces.
4. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
OPB：3-Jaw Large Through Hole High Speed Power Chuck,OPB-206、 OPB-208、 OPB-210、 OPB-212、 OPB-215、 OPB-218
OPB：3-Jaw Large Through Hole High Speed Power Chuck,OPB-206、 OPB-208、 OPB-210、 OPB-212、 OPB-215、 OPB-218
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole
3. By enlarging the through-hole, larger workpieces can be inserted.
4. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 4-jaw chucks are suitable for clamping irregular workpieces.
5. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
CL,CLT：2、3-Jaw Solid Power Chucks,CL-05、 CL-06、 CL-08、 CL-10、 CL-12、 CLT-05、 CLT-06、 CLT-08、 CLT-10、 CLT-12
CL,CLT：2、3-Jaw Solid Power Chucks,CL-05、 CL-06、 CL-08、 CL-10、 CL-12、 CLT-05、 CLT-06、 CLT-08、 CLT-10、 CLT-12
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces
2. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw chucks are suitable for clamping irregular workpieces.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
PLVE：3-Jaw Pull Back Power Chuck Fixtures,PLVE-06、 PLVE-08、 PLVE-10
Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
1.Rust-proof for Pneumatic Cylinder：Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design：Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor’t deform.
EL,ELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chucks,EL-06, EL-08, EL-10, ELT-06, ELT-08, ELT-10
EL,ELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chucks,EL-06, EL-08, EL-10, ELT-06, ELT-08, ELT-10
1. Crank Type Long Jaw Stroke with the large through-hole.
2. A super-long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
OPL,OPT-L：2、3-Jaw Long Stroke Hollow Power Chucks,OP-206L, OP-208L, OP-210L, OPT-206L, OPT-208L, OPT-210L
OPL,OPT-L：2、3-Jaw Long Stroke Hollow Power Chucks,OP-206L, OP-208L, OP-210L, OPT-206L, OPT-208L, OPT-210L
1. A long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
2. For a wedge type, the clamping force is stable.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
VL-DP：3-Jaw Solid Chuck with Anti-chips Sealed & Water-proof Flange Plate for Vertical Lathe,VL-12DP, VL-15DP, VL-18DP, VL-21DP, VL-24DP, VL-32DP
VL-DP：3-Jaw Solid Chuck with Anti-chips Sealed & Water-proof Flange Plate for Vertical Lathe,VL-12DP, VL-15DP, VL-18DP, VL-21DP, VL-24DP, VL-32DP
1.The dustproof patent structure can prevent the metal chips get into the chuck inside.
2.The clean hole design can blow air into the chuck internal to clean out the residual chips and coolant.
3.The drainage plate structure design can prevent the coolant get into the spindle internally.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
MB：3-Jaw Large Throunge Hole Power Chuck Fixture,MB-06, MB-08, MB-10
With built-in type cylinder,it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cyclinder： Inside wall of cyclinder being rustproof treated ;cyclinder can work under wet or high moisture circumstances without rusty or serized trouble.
2.Dusts-proof and Waterproof: Dust-proof and Waterproof structure prevents work-chip and coolant water form entering into inside of chuck cyclinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder: The cylinder is connected to chunk itself directly for obtaining better stability,less space,and higher machining efficiency.
ML,MLT：2、3 Jaw Long Stroke Hollow Power Chuck Fixtures,ML-06, ML-08, ML-10, MLT-06, MLT-08, MLT-10
ML,MLT：2、3 Jaw Long Stroke Hollow Power Chuck Fixtures,ML-06, ML-08, ML-10, MLT-06, MLT-08, MLT-10
1. A long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
2. For a wedge type, the clamping force is stable.
3. Install on the hydraulic vertical stationary cylinder to connect the hydraulic pump to actuate the clamping work.
MEL,MELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chuck Fixtures,MEL-06, MEL-08, MEL-10, MELT-06, MELT-08, MELT-10
MEL,MELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chuck Fixtures,MEL-06, MEL-08, MEL-10, MELT-06, MELT-08, MELT-10
1. Crank Type Long Jaw Stroke with the large through-hole.
2. A super long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
3. Install on the hydraulic vertical stationary cylinder to connect the hydraulic pump to actuate the clamping work.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
P：Super High Speed Hollow Rotary Hydraulic Cylinders,P0928, P1036, P1246, P1552, P1875, P1878, P2091, P2093, P2511, P2916, P3420
P：Super High Speed Hollow Rotary Hydraulic Cylinders,P0928, P1036, P1246, P1552, P1875, P1878, P2091, P2093, P2511, P2916, P3420
1. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
2. Connect the through hole of cylinder, draw-bar and chuck, then adapt with bar-feeder to achieve the fast loading.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.
L:Longer stroke