-
×
AE：8-Jaw Awl Type Chucks,AE-09
1 × $650.00
Subtotal: $650.00
Recommended Products
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
High clamping accuracy, high speed and high rigidity.
Sealed against swarf, chips and coolant.
The collet used must accord with DIN 6343.
SKU: n/a
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
SKU: n/a
CHANDOX
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
SKU: n/a
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SKU: n/a
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
SKU: n/a
Shop
Showing 21–40 of 454 results
-
AUTOGRIP
3D：Pull Down Power Chuck,3D-04, 3D-05, 3D-06, 3D-08, 3D-10, 3D-12, 3D-15
- Radial clamp and axial pull down at the same time, keep the workpiece attaching close to the base surface of the chuck.
- Almost no workpiece uplifting displacement.
- The pull down chuck’s body and the cylinder pull-down mechanism are heat-treated and fine boring, which guarantees the clamping precision and durableness.
- The airtight pressure detection function is optional.
SKU: n/a -
AUTOGRIP
3H：LARGE THRU-HOLE POWER CHUCK,3H-204、 3H-205、 3H-206、 3H-208、 3H-210、 3H-212、 3H-215
- WEDGE-HOOK type 3-jaw with the extra large through-hole.
- Matching surfaces of all parts hardened, ground and lubricated directly.
- High rigidity and high repeatability precision.
- J is the hole diameter of blank draw nut,
- If not notified, Autogrip will adopt the K Default as K value.
- K max is the maximum thread specification, and it could be customize.
SKU: n/a -
AUTOGRIP
3J：Finger Power Chuck,3J-05, 3J-06, 3J-08, 3J-10, 3J-12
- Gripping at the end face and preventing deformation of workpiece.
- Suitable for thin wall workpiece processing.
- The gripping compensating mechanism can grasp the irregular surface workpieces well.
- Air-tight pressure detect function is optional.
SKU: n/a -
AUTOGRIP
3L：CRANK type Extra Long Stroke Thru-Hole 3-Jaw Power Chuck,3L-205, 3L-206, 3L-208, 3L-210, 3L-212, 3L-215
AUTOGRIP3L：CRANK type Extra Long Stroke Thru-Hole 3-Jaw Power Chuck,3L-205, 3L-206, 3L-208, 3L-210, 3L-212, 3L-215
Our 3 jaw lathe chuck is widely used for Lathes and milling machines, it is best for holding and rotating the workpiece during machining operations such as turning, thread cutting, facing, boring, drilling, grinding, and parting.
- Crankshaft three jaw lathe chuck with the large through-hole, and extra-long jaw stroke.
- 3 jaw power chuck has the same self-centering chuck, its jaws are interconnected via a scroll gear and can move at the same time.
- Matching surfaces of all parts hardened, ground, and lubricated directly.
- High rigidity and high repeatability precision.
- three jaw chuck is the best option for holding circular or hexagonal cross-sections
- 3 jaw lathe chuck with an accuracy level of around 0.010
- J is the hole diameter of the blank draw nut, K is the maximum thread specification, and it could be customized.
SKU: n/a -
-
AUTOGRIP
3N：Inclined Master Jaws Power Chuck,3N-06, 3N-08, 3N-10
- The surface of the center through cover is grinding treated, it can be the position base surface of the jig/workpiece.
- The slideway of main jaws is inclined. It improves the clamping force and reduces the upfloat situation of the workpiece.
- Work with standard top jaws.
- Airtight pressure detect function is optional.
- External gripping only.
SKU: n/a -
AUTOGRIP
3U-K：Pull Lock Power Chuck,3U-205K, 3U-206K, 3U-208K, 3U-210K, 3U-212K
- Pin-Arbor Draw Down type 3-jaw non-thru-hole power chuck.
- High radial gripping force and high accuracy.
- Suitable for heavy machining.
- Can work with the airtight detection device to perform axial position confirm, suitable for the precision of large length size process.
SKU: n/a -
-
AUTOGRIP
3W：Swing type three jaw Chuck,3W-08, 3W-10, 3W-12, 3W-15, 3W-C08, 3W-C10, 3W-C12, 3W-C15
3W series are special purpose power chucks with innovative ball lock design for gripping tapered casting parts, with self-centering function. 3W can grip the work piece in radial direction and then pull down simultaneously. Gripping on forging or casting part with taper up to 20°, Jaw equalizing: 5° Max. Anti-dust , seal proof and easy to maintain.
3W is a power chuck with self-centering function Grip the work piece in radial direction and then pull down simultaneously. Gripping on forging or casting part with taper up to 20° Jaw equalizing: 5°Max. Anti-dust and Seal proof for cutting fluid, easy to maintain. The 3W power chuck offers an optional on/off feature which allows an easy change from centralizing to compensating (3W-C). 3W-C can offered centralizing and compensating function.- Swing and grasp the workpiece with three jaws. (3W is automatically positioned to the center type)
- The three jaw chuck is suitable for such materials as the casting and forging process.
- The three-jaw chuck is suitable for heavy machining.
- Seal proof for dust and cutting fluid, it is more convenient when maintenance.
- Swing parts are to heat treatment hardened and ground for steel, in order to improve products service life.
- Soft jaw and Gripper are optional.* The type of the gripper is selected according to the work-piece conditions.
- The three jaw chuck can according to different processing requirements, O.D. Gripping and I.D. Gripping can be interchanged.
SKU: n/a
