-
×
AE：8-Jaw Awl Type Chucks,AE-09
1 × $650.00
Subtotal: $650.00
Recommended Products
LI-HSUN
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1°
※ Hardened : HRC60°±1°
Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
Applicable for gear hobbing machine.
Accuracy : 0.008mm
SKU: n/a
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
High clamping accuracy, high speed and high rigidity.
Sealed against swarf, chips and coolant.
The collet used must accord with DIN 6343.
SKU: n/a
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
SKU: n/a
CHANDOX
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
SKU: n/a
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SKU: n/a
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
SKU: n/a
Shop
Showing 129–144 of 522 results
-
Tapping Machine, TRADE MAX
ATH：Pneumatic Tapping Tool Type ATH-12-1,12-2,12-3
Hand-held type tapping machine, which operates by air pressure, suitable for narrow and irregular spaces. Advance and retreat are controlled by pressing the buttons. According to the function, we got various degree head, chuck tapping head and torsional tapping head. Tapping capability ranges from M2 to M12, Torsional head type can assemble collect.
SKU: n/a -
AUTOWELL
ATW：WELLOCK LARGE OPENING VISE,ATW-689, ATW-810, ATW-811
ATW-689
1. 8.9” large opening.
2. Spindle nut does not protrude past the end of body.
3. Same distance from keyway to stationary jaw with AT-675.
4. Bed height 73.025±0.012mm (2.875±0.001”).
ATW-810
1. Updated body from AT-80, it provides 10” large opening and steadier vise body.
2. Bed height 84.074±0.012mm (3.26±0.001”).
3.11,600lbs clamping force.
SKU: n/a -
AUTOWELL
AVC：WELLOCK MC MACHINE VISE,AVC-100G/HV, AVC-130G/HV, AVC-160G/HV, AVC-165G/HV, AVC-200G/HV，APC-160G/HV
AUTOWELLAVC：WELLOCK MC MACHINE VISE,AVC-100G/HV, AVC-130G/HV, AVC-160G/HV, AVC-165G/HV, AVC-200G/HV，APC-160G/HV
1. Wellock MC Machine Vise is most suitable for VMC & HMC.
2. Wellock Semi-spherical segment eliminate deflection and lift.
3. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
4. 4 different clamping positions.
5. Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVK：ULTRA-LOW HEIGHT MECHANICAL POWER VISE,AVK-160, AVK-200
- Vise with ultra-low bed height & largest opening.
- Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
- Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
- Lockwell Anti-Lift mechanism (patented) ensures the workpiece does not deflect and lift.
- Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
- Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVL：MC LOCKWELl SUPER VISE,AVL-100G/HV, AVL-125G/HV, AVL-160G/HV, AVL-165G/HV, AVL-180G/HV, AVL-200G/HV, AVL-235G/HV
AUTOWELLAVL：MC LOCKWELl SUPER VISE,AVL-100G/HV, AVL-125G/HV, AVL-160G/HV, AVL-165G/HV, AVL-180G/HV, AVL-200G/HV, AVL-235G/HV
1. MC Lockwell Super Vise is most suitable for VMC & HMC and got patents.
2. Lockwell Anti-Lift Mechanism (patented) ensures the workpiece does not deflect and lift.
3. Unique Out-jaw design increase the clamping capacity.
4. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
5. Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVM：WELLOCK MC MECHANICAL POWER VISE,APV-160G/HV, AVM-100G/HV, AVM-130G/HV, AVM-160G/HV, AVM-165G/HV, AVM-180G/HV, AVM-200G/HV
AUTOWELLAVM：WELLOCK MC MECHANICAL POWER VISE,APV-160G/HV, AVM-100G/HV, AVM-130G/HV, AVM-160G/HV, AVM-165G/HV, AVM-180G/HV, AVM-200G/HV
1. Wellock MC Mechanical Power Vise is most suitable for VMC & HMC and owns 2 patents.
2. Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
3. Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
4. Wellock Semi-spherical segment eliminate deflection and lift.
5. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
6. 4 different clamping positions.
7. Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVQ：MC MECHANICAL POWER VISE,AVQ-100G/HV, AVQ-125G/HV, AVQ-160G/HV, AVQ-200G/HV
1. MC Mechanical Power Vise is most suitable for VMC & HMC and owns 3 patents.
2. Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
3. Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
4. Lockwell Anti-Lift mechanism (patented) ensures the work-piece does not deflect and lift.
5. Unique Out-jaw design increase the clamping capacity.
6. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
7. Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVR：MC MECHANICAL REVERSED POWER VISE,AVR-125G/HV, AVR-160G/HV
- Most suitable for VMC & HMC and owns 2 patents.
- Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
- Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
- Unique Out-jaw design increase the clamping capacity.
- Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
- Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVS：ULTRALARGE OPENING MC MECHANICAL POWER VISE,AVS-155G/HV, AVS-160G/HV
1. MC Mechanical Power Vise is most suitable for VMC & HMC and owns 3 patents.
2. Patented Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
3. Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
4. Lockwell Anti-Lift mechanism (patented) ensures the workpiece does not deflect and lift.
5. Unique Out-jaw design increase the clamping capacity.
6. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
7. Unique design facilitates the evacuation of chips.
SKU: n/a
Recommended Products
LI-HSUN
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1°
※ Hardened : HRC60°±1°
Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
Applicable for gear hobbing machine.
Accuracy : 0.008mm
SKU: n/a
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
High clamping accuracy, high speed and high rigidity.
Sealed against swarf, chips and coolant.
The collet used must accord with DIN 6343.
SKU: n/a
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
SKU: n/a
CHANDOX
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
SKU: n/a
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SKU: n/a
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
SKU: n/a