-
×
AE：8-Jaw Awl Type Chucks,AE-09
1 × $650.00
Subtotal: $650.00
Recommended Products
LI-HSUN
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1°
※ Hardened : HRC60°±1°
Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
Applicable for gear hobbing machine.
Accuracy : 0.008mm
SKU: n/a
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
High clamping accuracy, high speed and high rigidity.
Sealed against swarf, chips and coolant.
The collet used must accord with DIN 6343.
SKU: n/a
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
SKU: n/a
CHANDOX
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
SKU: n/a
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SKU: n/a
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
SKU: n/a
Shop
Showing 113–128 of 522 results
-
-
AUTOWELL
AQM：AIR POWER VISE,AQM-160G
1. Most suitable for mass production which need quick machine, such as milling VMC and HMC, expert work station.
2. This vise is adopting employs an air actuated cylinder. Circuiting progressively to make automation.
3. Safety locking mechanism for unexpected termination of air supply. After pneumatic clamping the workpiece will be clamped firmly even without the air supply.
4. Humanistic design. Easy ON/OFF switch control for pneumatic operation. The shifting speed is only 1.5 sec. With safety range 5mm. The optional electric control for automatic and FMS system is available.
5. AQM are all match vise, you could set up several of AQM together to operate with only one air source supply. 3 operate positions. Six faces of vise body has been ground and pre-set the holding slot, it can be processed vertically without jig block.
6. Even the air source at low pressure 8kg/cm2 which can be achived super hi-clamping force 90KN, and the 0-35KN clamping force can be adjusted freely by regulator.
7. Unique Out-jaw design increase the clamping capacity.
8. Lockwell Anti-Lift mechanism(patented) ensures the workpiece does not deflect and lift.
9. Rigid and tensile ductile iron FCT-60(80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been carburizing heat treated the gardness to HRC54°.
SKU: n/a -
Tapping Machine, TRADE MAX
AR：Pneumatic Tapping Machine Type AR-16,20,22,24,27
Mainly driven by air pressure. Working range is up to 1100mm, tapping capacity is M3~M27. Can be used for the production of inner hole threads of different sizes. Movable arm design provides the user with an easy and convenient way to operate. According to the working conditions, accessories can also be purchased to achieve multi-functional tapping.
SKU: n/a -
TRADE MAX
AS:Pneumatic Tapping Machine Type AS-08,12,16/II
Mainly driven by air pressure. Working range is up to 1400mm, tapping capacity is M2~M12. Can be used for the production of inner hole threads of different sizes. Simple to assemble, movable arm design provides the user with an easy and convenient way to operate. According to the working conditions, accessories can also be purchased to achieve multi-functional tapping.
SKU: n/a -
Tapping Machine, TRADE MAX
AS:Pneumatic Tapping Machine Type AS-20,22,24,27,30/II
Mainly driven by air pressure. Working range is up to 1400mm, tapping capacity is M2~M12. Can be used for the production of inner hole threads of different sizes. Simple to assemble, movable arm design provides the user with an easy and convenient way to operate. According to the working conditions, accessories can also be purchased to achieve multi-functional tapping.
SKU: n/a -
HOMGE
ASC-K：FIVE-AXIS ADJUSTABLE SELF-CENTERING VISE (ASC-K),ASC-130X310K, ASC-160X310K
- .Vise body is made of High quality Steel (S50C) and its slideways gone through high-frequency hardening to achieve HRC50, which makes the whole part durable.
- 2.Detachable jaws are made of High quality Tool Steel (SCM440) and gone through carburizing to achieve HRC55. Since both sides are fixed size and able to be used as a datum, users can reverse them to increase clamping range.
- 3.The vise’s clamping force can achieve 1300KG, the repeatability positioning precision of its clamping center is within ±0.02mm.
- 4.With the patented center positioning threaded pin, users can regulate clamping center easily and rapidly.
- 5.The 45° dovetail structure with teeth on the upper jaw ensures the bottom of the workpiece to be firmly clamped.
- 6.Applications: precision machining of four-axis, five-axis, CNC indexing table and vertical and horizontal CNC milling machines.
SKU: n/a -
HOMGE
ASC-M：FIVE-AXIS ADJUSTABLE SELF-CENTERING VISE (ASC-M),ASC-127X130M, ASC-127X160M, ASC-127X210M, ASC-127X260M, ASC-150X260M
HOMGEASC-M：FIVE-AXIS ADJUSTABLE SELF-CENTERING VISE (ASC-M),ASC-127X130M, ASC-127X160M, ASC-127X210M, ASC-127X260M, ASC-150X260M
- Vise body is made of High quality Steel (S50C) and its slideways gone through high-frequency hardening to achieve HRC50, which makes the whole part durable.
- 2.Detachable jaws are made of High quality Tool Steel (SCM440) and gone through carburizing to achieve HRC55. Since both sides are fixed size and able to be used as a datum, users can reverse them to increase clamping range.
- 3.The vise’s clamping force can achieve 1300KG, the repeatability positioning precision of its clamping center is within ±0.02mm.
- 4.Users can calibrate the clamping center of vise by adjusting the nut in the middle.
- 5.The 45° dovetail structure with teeth on the upper jaw ensures the bottom of the workpiece to be firmly clamped.
- 6.The vise body can be mounted directly on the machine table by the middle with 2 pieces of M12 screws. This vise also can clamp 2 workpieces by mounting the centre jaw in the middle.
- 7.Applications: precision machining of four-axis, five-axis, CNC indexing table and vertical and horizontal CNC milling machines.
SKU: n/a -
-
Tapping Machine, TRADE MAX
AT：Pneumatic Tapping Machine Type AT-08,12,16/I
Mainly driven by air pressure. Working range is up to 1600mm, tapping capacity is M2~M12. Can be used for the production of inner hole threads of different sizes. Simple to assemble, movable arm design provides the user with an easy and convenient way to operate. According to the working conditions, tapping accessories can also be purchased to achieve multi-functional tapping.
SKU: n/a -
Tapping Machine, TRADE MAX
AT：Pneumatic Tapping Machine Type AT-08,12,16/II
Mainly driven by air pressure. Working range is up to 1600mm, tapping capacity is M2~M12. Can be used for the production of inner hole threads of different sizes. Simple to assemble, movable arm design provides the user with an easy and convenient way to operate. According to the working conditions, tapping accessories can also be purchased to achieve multi-functional tapping.
SKU: n/a -
Tapping Machine, TRADE MAX
AT：Pneumatic Tapping Machine Type AT-20,22,24,27,30/I
Mainly driven by air pressure. Working range is up to 1600mm, tapping capacity is M2~M12. Can be used for the production of inner hole threads of different sizes. Simple to assemble, movable arm design provides the user with an easy and convenient way to operate. According to the working conditions, tapping accessories can also be purchased to achieve multi-functional tapping.
SKU: n/a -
Tapping Machine, TRADE MAX
AT：Pneumatic Tapping Machine Type AT-20,22,24,27,30/II
Mainly driven by air pressure. Working range is up to 1600mm, tapping capacity is M2~M12. Can be used for the production of inner hole threads of different sizes. Simple to assemble, movable arm design provides the user with an easy and convenient way to operate. According to the working conditions, tapping accessories can also be purchased to achieve multi-functional tapping.
SKU: n/a
Recommended Products
LI-HSUN
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1°
※ Hardened : HRC60°±1°
Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
Applicable for gear hobbing machine.
Accuracy : 0.008mm
SKU: n/a
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
High clamping accuracy, high speed and high rigidity.
Sealed against swarf, chips and coolant.
The collet used must accord with DIN 6343.
SKU: n/a
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
SKU: n/a
CHANDOX
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
SKU: n/a
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SKU: n/a
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
SKU: n/a