Recommended Products
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 101–120 of 134 results
-
AUTOGRIP
RL：Short type Rotary Hydraulic Cylinder with Coolant Connection and Safety Device,RL-100, RL-125, RL-150, RL-200, RL-75
AUTOGRIPRL：Short type Rotary Hydraulic Cylinder with Coolant Connection and Safety Device,RL-100, RL-125, RL-150, RL-200, RL-75
- To allow coolant to be feed from the rear end of the distributor through the rotating union
- Built-in safety check valves and pressure relief valves.
- The drain port should be independently connected to oil tank to avoid back pressure.
- The rotary cylinder should not run without liquid through coolant port.
SKU: n/a -
AUTOGRIP
RS-N：Short type Rotary Hydraulic Cylinder with Stroke Control，RS-100N, RS-125N, RS-150N, RS-200N, RS-6520N, RS-6530N, RS-7530N, RS-75N
AUTOGRIPRS-N：Short type Rotary Hydraulic Cylinder with Stroke Control，RS-100N, RS-125N, RS-150N, RS-200N, RS-6520N, RS-6530N, RS-7530N, RS-75N
- For short form, high speed and stroke control.
- With proximity sensor , the movement of the position is easy to adjust and confirm when operating.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
CHANDOX
RT：Rotary air chuck fixtures ( intermittent operation ),RT-05, RT-06, RT-08
INTERMITTENT OPERATION
Suitable for light cutting
It’s ldeal for dividing or cutting work pieces by mounting the chuck on indexing table or rotary table. The distinctive feature is that chuck rotates with the spindle of indexing table or rotary table.
1.The chuck is designed for intermittently rotate in limited rotary speed with rotary table.
2.Rustproof treated cylinder : The cylinder won’t get rusty and seized even in wet or hign moisture working environment.
3.Integral pneumatic cylinder :Connect chuck and built-in cylinder to each other directly;thus enables operation stability.Moreover,it is more convenient for installation and operation since the use of draw tube and draw bar are no longer necessary.SKU: n/a -
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.SKU: n/a -
AUTOGRIP
Rubber Grip Collet,RG-42, RG-52, RG-65
- Rubber grip collet for push type or draw type collet chucks.
- Full griping area: high rigidity, more gripping force.
Gripping smoothly: prevent to damage the workpiece. - More accurate than standard spring collets.
Accuracy: With customized rubber grip collet. - Grip Range: ±0.5mm
- Quick change and easy.
- Dust-proof and swarf-proof design.
SKU: n/a -
AUTOGRIP
RV：Hydraulic Rotary Valve,RV-31H, RV-A31H
- Hydraulic Rotary valves is used for clamping the cylinder on the rotary table.
- Through unique design, Rotary hydraulic valves can make the rotary housing be rotated with light force and is free from oil leaking.
- I Type is a single circuit that controls the clamping.
- II Type is a double circuit that separately controls the clamping.
- The drain port of the RV type should be independently connected to the oil tank to avoid back pressure.
SKU: n/a -
AUTOSTRONG
SC：3-jaw scroll chuck plain back,solid jaws,SC-10, SC-12, SC-16, SC-3, SC-4, SC-5, SC-6, SC-7, SC-8, SC-9
AUTOSTRONGSC：3-jaw scroll chuck plain back,solid jaws,SC-10, SC-12, SC-16, SC-3, SC-4, SC-5, SC-6, SC-7, SC-8, SC-9
- Front and back mounted (SC-16 excluded). Easy to install Self-centering chuck improve efficiency. Interchangeable utilization of internal and external hard jaws for widely clamping methods SC self-centering scroll chuck feature economical and durable, especially suitable for mass production. Gripping accuracy of 0.03mm (0.0012 inch) T.I.R.. The body is made of highly strength and durability MEEHANITE. It is suitably used for high speed revolution also durable 3 times more than regular material.
SKU: n/a -
AUTOGRIP
SCB：Stationary Draw in Collet Chuck,SCB-52, SCB-65
- Build-in cylinder, ideal for drilling machines, milling machines and machining centers.
- Work with Autogrip’s rubber collet(RG series), quick change and saving runtime.
- Two modes for the media supply: side-supply mode or baseplate-supply mode.
SKU: n/a -
AUTOSUPER
SCV：Self Centering Vise,SCV12710, SCV1275, SCV1276, SCV1278, SCV15010, SCV764
1. Self Centring Precision Vise is suitable for 4 and 5 Axis CNC Rotary Table usage, either in horizontal or vertical machining.
2. Vise precision of its center repetition position is ±0.01mm.
3. Using high quality alloy steel. Slideway has high frequence heat treatness at HRC 45 or more to keep the accuracy and its long use life.
4.Vise hard jaw material is full steel and heat treatness at HRC 55 or more.
Owing to its good design to use both sides of jaw since it is exchangeable.SKU: n/a -
AUTOSTRONG
SE：6-jaw scroll chuck plain back,SE-4, SE-6, SE-7
- Easy to install. Self-centering chuck improve efficiency. SE types are specially meet for drilling, endmilling, tapping or grinding in tool grinders. Huge bore diameter design for wider application of bar workpieces. SE type scroll chuck feature gripping for thin tube and high roundness accuracy. The body is made of highly strength and durability MEEHANITE. It is suitably used for high speed revolution also durable 3 times more than regular material.
SKU: n/a -
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.SKU: n/a -
AUTOSTRONG
SIC：4-jaw scroll chuck plain back, solid jaws (front and back mounted),SIC-12, SIC-16, SIC-7, SIC-9
AUTOSTRONGSIC：4-jaw scroll chuck plain back, solid jaws (front and back mounted),SIC-12, SIC-16, SIC-7, SIC-9
- Gripping of square or octagonal workpieces could fit into central line automatically. SIC have high stability in gripping thin tube work piece. The specification is the same as SC type. The body is made of MEEHANITE. It is suitably used for high speed revolution and 3 times more durable than regular material.
SKU: n/a -
AUTOSTRONG
SIK：4-jaw strong scroll chuck plain back, 2-piece jaws (front and back mounted),SIK-12, SIK-16, SIK-7, SIK-9
AUTOSTRONGSIK：4-jaw strong scroll chuck plain back, 2-piece jaws (front and back mounted),SIK-12, SIK-16, SIK-7, SIK-9
- Front and back mounted (SIK-16 excluded). Easy to install Self-centering chuck improve efficiency. SK types chucks have wider utilization range; Top jaws can be changed quickly between hard jaws or soft jaws Hard jaws are suitable for square, octagonal or thin tube work piece clamping Soft jaws could grip rectangular work piece after being anisotropic machined. The specification is the same as SK type. SK self-centering scroll chuck feature economical and durable, suitable for mass production. The body is made of highly strength and durability MEEHANITE. It is suitably used for high speed revolution also durable 3 times more than regular material.
SKU: n/a -
AUTOSTRONG
SK：3-jaw strong scroll chuck plain back, 2-piece jaws (front and back mounted),SK-10, SK-12, SK-16, SK-4, SK-6, SK-7, SK-8, SK-9
AUTOSTRONGSK：3-jaw strong scroll chuck plain back, 2-piece jaws (front and back mounted),SK-10, SK-12, SK-16, SK-4, SK-6, SK-7, SK-8, SK-9
- Front and back mounted (SK-16 excluded). Easy to install Self-centering chuck improve efficiency. SK types chucks have wider utilization range; Top jaws can be changed quickly between hard jaws or soft jaws hard jaws suitable for heavy cutting; soft jaws suitable for light and precision cutting. It is convenient to change between hard jaws and soft jaws. Interchangeable utilization of internal and external hard jaws for widely clamping methods SK self-centering scroll chuck feature economical and durable, suitable for mass production. Gripping accuracy of 0.03mm (0.0012 inch) T.I.R.. The body is made of highly strength and durability MEEHANITE. It is suitably used for high speed revolution also durable 3 times more than regular material.
SKU: n/a
