Recommended Products
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 21–40 of 134 results
-
AUTOGRIP
4H：4-JAW LARGE THRU-HOLE POWER CHUCK,4H-12, 4H-15, 4H-18, 4H-206, 4H-208, 4H-210
- WEDGE-HOOK type 4-jaw with the extra large through-hole.
- Matching surfaces of all parts hardened, ground and lubricated directly.
- High rigidity and high repeatability precision.
- J is the hole diameter of blank draw nut,
- If not notified, Autogrip will adopt the K Default as K value.
- K max is the maximum thread specification, and it could be customize.
SKU: n/a -
AUTOGRIP
4T：4 Jaw Two Motion Type Independent Chuck,4T-08, 4T-10, 4T-12, 4T-15
- CRANK type with two pairs of 2 jaws self-center independent of each other.
- The 4T series jaw chuck is suitable for square bars and other nonuniform-shaped workpieces.
- Precisely center cylindrical stock to within the limits of the lathe’s accuracy.
- Form rectangular shaped objects.
SKU: n/a -
AUTOGRIP
CB/CBA：Draw Back Collet Chuck，CB-42, CB-42A5, CB-42A6, CB-52, CB-5217, CB-52A5, CB-52A6, CB-65, CB-65A6, CB-65A8, CB-80, CB-80A8
AUTOGRIPCB/CBA：Draw Back Collet Chuck，CB-42, CB-42A5, CB-42A6, CB-52, CB-5217, CB-52A5, CB-52A6, CB-65, CB-65A6, CB-65A8, CB-80, CB-80A8
- Ideal for CNC lathes, specialized machines, and turning equipment for bar stock or shaft machining.
- Draw-back clamping with radial clamping and axial fine-tuning torque, featuring through-hole.
- Offers high precision, speed, and rigidity.
- Features a comprehensive waterproof design to prevent cutting fluid from entering the spindle through-hole.
- J is the hole diameter of blank draw nut.
- K is the maximum thread specification and it could be customize.
SKU: n/a -
AUTOGRIP
CBD：Dead Length Collet Chuck,CBD-52, CBD-5212, CBD-5217, CBD-52A5, CBD-52A6, CBD-65, CBD-6514, CBD-65A5, CBD-65A6, CBD-65A8
AUTOGRIPCBD：Dead Length Collet Chuck,CBD-52, CBD-5212, CBD-5217, CBD-52A5, CBD-52A6, CBD-65, CBD-6514, CBD-65A5, CBD-65A6, CBD-65A8
- The push-forward clamping, combined with a stop block mechanism, features radial clamping with zero radial displacement, enabling precise positioning of the workpiece feeding length for improved length accuracy control.
- AUTOGRIP rubber tube clamping eliminates forward pushing, minimizing surface damage.
- Interchangeable workpiece stopper and dust cover enable through-hole applications and chip protection, suitable for sub-spindle clamping, reducing tension and compression.
- J is the hole diameter of the blank draw nut.
- K is the maximum thread specification and it could be customized.
SKU: n/a -
AUTOGRIP
CBE/CBEA：End stop Collet Chuck,CBE-42, CBE-4212, CBE-42A5, CBE-42A6, CBE-52, CBE-5212, CBE-5217, CBE-52A5, CBE-52A6, CBE-65, CBE-6514, CBE-65A5, CBE-65A6, CBE-65A8
AUTOGRIPCBE/CBEA：End stop Collet Chuck,CBE-42, CBE-4212, CBE-42A5, CBE-42A6, CBE-52, CBE-5212, CBE-5217, CBE-52A5, CBE-52A6, CBE-65, CBE-6514, CBE-65A5, CBE-65A6, CBE-65A8
The pull-back positioning clamping, combined with the workpiece stop block mechanism, features radial clamping and axial fine-tuning torque, enabling precise positioning of the workpiece feeding length for enhanced length accuracy control.
The blocking block and dust cover can be swapped for versatile use and chip protection.
J is the hole diameter of blank draw nut.
K is the maximum thread specification and it could be customize.The blocking block and dust cover can be swapped for versatile use and chip protection.
J is the hole diameter of blank draw nut.
K is the maximum thread specification and it could be customize.SKU: n/a -
CHANDOX
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.SKU: n/a -
AUTOGRIP
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
AUTOGRIPCL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
- PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
- High clamping accuracy, high speed and high rigidity.
- Sealed against swarf, chips and coolant.
- The collet used must accord with DIN 6343.
SKU: n/a -
CHANDOX
CL,CLT：2、3-Jaw Solid Power Chucks,CL-05、 CL-06、 CL-08、 CL-10、 CL-12、 CLT-05、 CLT-06、 CLT-08、 CLT-10、 CLT-12
CHANDOXCL,CLT：2、3-Jaw Solid Power Chucks,CL-05、 CL-06、 CL-08、 CL-10、 CL-12、 CLT-05、 CLT-06、 CLT-08、 CLT-10、 CLT-12
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces
2. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw chucks are suitable for clamping irregular workpieces.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a -
AUTOGRIP
CL：Collet Chuck,CL-26, CL-30, CL-36, CL-42, CL-52, CL-6017, CL-6022, CL-80
- PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
- High clamping accuracy, high speed and high rigidity.
- Sealed against swarf, chips and coolant.
- The collet used must accord with DIN 6343.
SKU: n/a -
