Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 209–224 of 522 results
-
SHINE
F348： INTERCHANGEABLE MEDIUM DUTY SMALL DIAMETER LIVE CENTER，F348-2, F348-3, F348-4, F348-5
Type: Interchangeble live center
Duty: MediumApplication CNC lathe and high speed lathe or other lathe machine.
Working Usage Applicable for small dia. and the length less than 300mm medium turning process.
Structure Combination of thrust bearing and needle bearing at front and rear place, and with the design of double supporting point.
Accessories 48 type Tips and 61 type pin punch.
TIR Less than 0.005mm
SKU: n/a -
SHINE
F361: INTERCHANGEABLE MEDIUM DUTY SMALL DIAMETER LIVE CENTER，F361-3, F361-4, F361-5
Type: Interchangeble live center
Duty: MediumApplication CNC lathe and high speed lathe or other lathe machine.
Working Usage Applicable for small dia. and the length less than 300mm medium turning process.
Structure Combination of thrust bearing and needle bearing at the design of double supporting point.front and rear place, and with the design of double supporting point.
Accessories 61 type Tips and 61 type pin punch.
TIR Less than 0.005mm
SKU: n/a -
SHINE
F362: MEDIUM DUTY PRECISE SMALL DIAMETER LIVE CENTER，F362-2, F362-3, F362-4, F362-5
Type: Live centers series
Duty: MediumApplication: CNC lathe, high speed lathe and other lathe
Working Usage: Applicable for small diameter and length less than 300mm medium turning process
Structure: Adopted thrust bearing and needle bearing at front and rear place, with the design of two supporting point
TIR Less than 0.002mm
Inspecting the run out accuracy of the center tip must be under the status of holding the workbar tightly.
SKU: n/a -
SHINE
F363：MEDIUM DUTY PRECISE SMALL DIAMETER LONG NOSE LIVE CENTER，F363-2, F363-3, F363-4, F363-5
Type: Live centers series
Duty: MediumApplication CNC lathe, high speed lathe and other lathe
Working Usage Applicable for small diameter and length less than 300mm medium turning process
Structure: Adopted thrust bearing and needle bearing at front and rear place, with the design of two supporting point
TIR: Less than 0.002mm
SKU: n/a -
AUTOGRIP
FA：Single Slide Facing Head,FA-1570, FA-615, FA-830
- Feed mechanism is transmitted by Rack and Pinion or Wedge Plunger, with steady feed speed. Simple adjustment for feed speed and stroke.
- Matching surfaces of all parts hardened, grounding and lubricated directly. With rigidity and durability.
- Stopper accurancy: ±0.03mm.
- Suitable for using with RS type cylinder.
SKU: n/a -
AUTOGRIP
FA：Single Slide Facing Head,FA-408, FA-610, FA-812
- The feed mechanism is Wedge Plunger, with a steady feed speed. Simple adjustment for feed speed and stroke.
- Matching surfaces of all parts hardened, grounded, and lubricated directly. With rigidity and durability.
- Stopper accuracy: ±0.03mm.
- Suitable for use with RS-type cylinder.
- For precision processes, Wedge Plunger type facing heads are suitable for use with electro-servo and ball screw mechanisms.
SKU: n/a -
SAFEWAY
FAS-100C 5 Axis Machine Vise,FAS-100C-FB, FAS-100C-FM, FAS-100C-MG, FAS-100C-MN, FAS-100C-MX, FAS-100C-SJ
SAFEWAYFAS-100C 5 Axis Machine Vise,FAS-100C-FB, FAS-100C-FM, FAS-100C-MG, FAS-100C-MN, FAS-100C-MX, FAS-100C-SJ
- Compact vise body which is best choice for 5-axis machining center
- Clamping system: Mechancial, Self-centering, Power type
- The optimized solution “balance mechanism with grippers” : Any workpiece which are difficult to clamp can be pereformed well.
- Best choice for irregular, round, asymmetrical, and step workpiece
- Vise body- sliding surface: Hardened ,Durable and Accurate.
SKU: n/a -
SAFEWAY
FAS-100Q： 5 Axis Power Vise,FAS-100Q-FB, FAS-100Q-FM, FAS-100Q-MG, FAS-100Q-MN, FAS-100Q-MX, FAS-100Q-SJ
SAFEWAYFAS-100Q： 5 Axis Power Vise,FAS-100Q-FB, FAS-100Q-FM, FAS-100Q-MG, FAS-100Q-MN, FAS-100Q-MX, FAS-100Q-SJ
- Compact vise body which is best choice for 5-axis machining center
- Clamping system: Mechancial, Self-centering, Power type
- The optimized solution “balance mechanism with grippers” : Any workpiece which are difficult to clamp can be pereformed well.
- Best choice for irregular, round, asymmetrical, and step workpiece
- Vise body- sliding surface: Hardened ,Durable and Accurate.
SKU: n/a -
AUTOGRIP
FD：Double Slide Facing Head，FD-1060, FD-632, FD-840
- Feed mechanism is transmitted by Crank with steady feed speed. Simple adjustment for feed speed and stroke.
- Matching surfaces of all parts hardened, grounding and lubricated directly. With rigidity and durability.
- Stopper accurancy: ±0.03mm.
- Suitable for using with RS type cylinder.
SKU: n/a
Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.