Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 193–208 of 522 results
-
SAFEWAY
DAV： Double & Anglock Machine Vise,DAV-100V,DAV-130V,DAV-160V,DAV-200V
- This vise body is controlled, and always maintains the fixed height of vise body.
- Double clamping mechanism, it can be freely adjusted with the opening range, and two workpieces of different sizes can be processed at the same time.
- The clearance of workpiece is +/- 15mm, and keep equal clamping forces on two workpieces.
- Clamping system: Lead Screw
- Both movable jaw is featured with lock down mechanism which eliminate the lifting of workpieces.
- Powerful material, the vise is made of high tensile spherical ductile iron (FCD600) (60kg/mm2, 80,000 psi).
SKU: n/a -
SAFEWAY
DBV：Self-Centering Mechanical Vise,DBV-100V, DBV-130V, DBV-160V, DBV-200V
- This vise body is controlled, and always maintains the fixed height of vise body.
- Double Self-Centering function
- Keep the clearance within +/-0.01mm
- The clearance of workpiece is +/- 15mm, and keep equal clamping forces on two workpieces.
- Clamping system: Lead Screw
- Both movable jaws are featured with lock down mechanism which eliminate the lifting of workpiece
- Powerful material, the vise is made of high tensile spherical ductile iron (FCD600) (60kg/mm2, 80,000 psi).
SKU: n/a -
LI-HSUN
DK：LATHE DEAD WORK-DRIVING CENTER-DK TYPE (FIXED TIP)，DK15-MT.4, DK23-MT.4, DK32-MT.4
LATHE DEAD WORK-DRIVING CENTER-DK TYPE (FIXED TIP)
- Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1°. - Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
- Applicable for gear hobbing machine.
- Accuracy : 0.008mm
SKU: n/a - Body and center shaft are made of alloy steel with heat and sub-zero treatment.
-
LI-HSUN
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
- Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1° - Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
- Applicable for gear hobbing machine.
- Accuracy : 0.008mm
SKU: n/a - Body and center shaft are made of alloy steel with heat and sub-zero treatment.
-
SAFEWAY
EHV-160 Hydraulic Vise (Extension type),EHV-160A, EHV-160B
- Most sutible for Milling Machine
- High and stable clamping forces, most sutible for heavy duty machinining
- Clamping System: Mechanical / Hydraulic.
- Semi-spherical segment eliminates jaw lifting and workpiece tilting
- High Rigidity Material: Ductile Iron FCD 600 JIS (= GGG-60)(60kg/mm2, 80,000 psi ).
- Two Parts could be ordered separately
SKU: n/a -
AUTOSUPER
EHV：Mc Exchangeable Hydraulic Vise,EHV-130V, EHV-160V, EHV-160VL, EHV-200V, EHV-200VL
1.Rigid material-vise body of ductile iron FCD60JIS (equal to GGG60) with 60 kgs/mm2 or 80,000 psi tensile strength.
2.The slide ways are heat treated to HRC 45° and that can provide the high accuracy and long service life.
3.Fixed Height, EHV vises can be used 2 or more together.
4.EHV vise is suitable for CNC Vertical & Horizontal Machine Center.
5.Exchangeable jaws: quick & easy replacement.
6.Step Jaws are optional.SKU: n/a -
CHANDOX
EL,ELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chucks,EL-06, EL-08, EL-10, ELT-06, ELT-08, ELT-10
CHANDOXEL,ELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chucks,EL-06, EL-08, EL-10, ELT-06, ELT-08, ELT-10
1. Crank Type Long Jaw Stroke with the large through-hole.
2. A super-long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a -
AUTOSUPER
EPV：MC EXCHANGEABLE POWER VISE,EPV-130V, EPV-160V, EPV-160VL, EPV-200V, EPV-200VL
1.Rigid material-vise body of ductile iron FCD60JIS (equal to GGG60) with 60 kgs/mm2or 80,000 psi tensile strength.
2.The slide ways are heat treated to HRC 45° and that can provide the high accuracy and long service life.
3.Fixed Height, EPV vises can be used 2 or more together
4.EPV vise is suitable for CNC Vertical & Horizontal Machine Center.
5.Exchangeable jaws: quick & easy replacement. 6.Step Jaws are optional.
SKU: n/a -
AUTOSUPER
EPVS：MC PRESSURE CONSTANT POWER VISE,EPV-130VS, EPV-160VS, EPVS-160VLS, EPVS-200VLS, EPVS-200VS
AUTOSUPEREPVS：MC PRESSURE CONSTANT POWER VISE,EPV-130VS, EPV-160VS, EPVS-160VLS, EPVS-200VLS, EPVS-200VS
1.Rigid material-vise body of ductile iron FCD60JIS (equal to GGG60) with 60 kgs/mm2or 80,000 psi tensile strength.
2.The slide ways are heat treated to HRC 45° and that can provide the high accuracy and long service life.
3.Fixed Height, EPV vises can be used 2 or more together.
4.EPV vise is suitable for CNC Vertical & Horizontal Machine Center.
5.Exchangeable jaws: quick & easy replacement.
6. 4-Step Pressure Constant device.
7. Step Jaws are optional.SKU: n/a -
AUTOSUPER
EV：MC EXCHANGEABLE MACHINEICAL VISE,EV-130V, EV-160V, EV-160VL, EV-200V, EV-200VL
1.Rigid material-vise body of ductile iron FCD60JIS (equal to GGG60) with 60 kgs/mm2 or 80,000 psi tensile strength.
2.The slide ways are heat treated to HRC 45° and that can provide the high accuracy and long service life.
3.Fixed Height, EV vises can be used 2 or more together.
4.EV vise is suitable for CNC Vertical & Horizontal Machine Center.
5.Exchangeable jaws: quick & easy replacement.
6.Step Jaws are optional.SKU: n/a
Recommended Products
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
※ Hardened : HRC60°±1°
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.