Recommended Products
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
CL-A：Collet Chuck，CL-26A4, CL-30A4, CL-36A5, CL-42A5, CL-42A6, CL-52A6, CL-60A6, CL-60A8, CL-80A8
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.
CK：Collet Chucks,CK30A4, CK42A5, CK42A6, CK52A5, CK52A6, CK60A6
1. It is suitable for working with a bar feeder for mass production.
2. The collet chuck needs work with customized-collet.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.
4. Suitable for workpieces with small diameters, such as rods, etc.
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.
Shop
Showing 181–200 of 507 results
-
SAFEWAY
DAV： Double & Anglock Machine Vise,DAV-100V,DAV-130V,DAV-160V,DAV-200V
- This vise body is controlled, and always maintains the fixed height of vise body.
- Double clamping mechanism, it can be freely adjusted with the opening range, and two workpieces of different sizes can be processed at the same time.
- The clearance of workpiece is +/- 15mm, and keep equal clamping forces on two workpieces.
- Clamping system: Lead Screw
- Both movable jaw is featured with lock down mechanism which eliminate the lifting of workpieces.
- Powerful material, the vise is made of high tensile spherical ductile iron (FCD600) (60kg/mm2, 80,000 psi).
SKU: n/a -
SAFEWAY
DBV：Self-Centering Mechanical Vise,DBV-100V, DBV-130V, DBV-160V, DBV-200V
- This vise body is controlled, and always maintains the fixed height of vise body.
- Double Self-Centering function
- Keep the clearance within +/-0.01mm
- The clearance of workpiece is +/- 15mm, and keep equal clamping forces on two workpieces.
- Clamping system: Lead Screw
- Both movable jaws are featured with lock down mechanism which eliminate the lifting of workpiece
- Powerful material, the vise is made of high tensile spherical ductile iron (FCD600) (60kg/mm2, 80,000 psi).
SKU: n/a -
LI-HSUN
DK：LATHE DEAD WORK-DRIVING CENTER-DK TYPE (FIXED TIP)，DK15-MT.4, DK23-MT.4, DK32-MT.4
LATHE DEAD WORK-DRIVING CENTER-DK TYPE (FIXED TIP)
- Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1°. - Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
- Applicable for gear hobbing machine.
- Accuracy : 0.008mm
SKU: n/a - Body and center shaft are made of alloy steel with heat and sub-zero treatment.
-
LI-HSUN
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
- Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1° - Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
- Applicable for gear hobbing machine.
- Accuracy : 0.008mm
SKU: n/a - Body and center shaft are made of alloy steel with heat and sub-zero treatment.
-
SAFEWAY
EHV-160 Hydraulic Vise (Extension type),EHV-160A, EHV-160B
- Most sutible for Milling Machine
- High and stable clamping forces, most sutible for heavy duty machinining
- Clamping System: Mechanical / Hydraulic.
- Semi-spherical segment eliminates jaw lifting and workpiece tilting
- High Rigidity Material: Ductile Iron FCD 600 JIS (= GGG-60)(60kg/mm2, 80,000 psi ).
- Two Parts could be ordered separately
SKU: n/a -
AUTOSUPER
EHV：Mc Exchangeable Hydraulic Vise,EHV-130V, EHV-160V, EHV-160VL, EHV-200V, EHV-200VL
1.Rigid material-vise body of ductile iron FCD60JIS (equal to GGG60) with 60 kgs/mm2 or 80,000 psi tensile strength.
2.The slide ways are heat treated to HRC 45° and that can provide the high accuracy and long service life.
3.Fixed Height, EHV vises can be used 2 or more together.
4.EHV vise is suitable for CNC Vertical & Horizontal Machine Center.
5.Exchangeable jaws: quick & easy replacement.
6.Step Jaws are optional.SKU: n/a -
CHANDOX
EL,ELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chucks,EL-06, EL-08, EL-10, ELT-06, ELT-08, ELT-10
CHANDOXEL,ELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chucks,EL-06, EL-08, EL-10, ELT-06, ELT-08, ELT-10
1. Crank Type Long Jaw Stroke with the large through-hole.
2. A super-long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
3. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a -
AUTOSUPER
EPV：MC EXCHANGEABLE POWER VISE,EPV-130V, EPV-160V, EPV-160VL, EPV-200V, EPV-200VL
1.Rigid material-vise body of ductile iron FCD60JIS (equal to GGG60) with 60 kgs/mm2or 80,000 psi tensile strength.
2.The slide ways are heat treated to HRC 45° and that can provide the high accuracy and long service life.
3.Fixed Height, EPV vises can be used 2 or more together
4.EPV vise is suitable for CNC Vertical & Horizontal Machine Center.
5.Exchangeable jaws: quick & easy replacement. 6.Step Jaws are optional.
SKU: n/a -
AUTOSUPER
EPVS：MC PRESSURE CONSTANT POWER VISE,EPV-130VS, EPV-160VS, EPVS-160VLS, EPVS-200VLS, EPVS-200VS
AUTOSUPEREPVS：MC PRESSURE CONSTANT POWER VISE,EPV-130VS, EPV-160VS, EPVS-160VLS, EPVS-200VLS, EPVS-200VS
1.Rigid material-vise body of ductile iron FCD60JIS (equal to GGG60) with 60 kgs/mm2or 80,000 psi tensile strength.
2.The slide ways are heat treated to HRC 45° and that can provide the high accuracy and long service life.
3.Fixed Height, EPV vises can be used 2 or more together.
4.EPV vise is suitable for CNC Vertical & Horizontal Machine Center.
5.Exchangeable jaws: quick & easy replacement.
6. 4-Step Pressure Constant device.
7. Step Jaws are optional.SKU: n/a -
AUTOSUPER
EV：MC EXCHANGEABLE MACHINEICAL VISE,EV-130V, EV-160V, EV-160VL, EV-200V, EV-200VL
1.Rigid material-vise body of ductile iron FCD60JIS (equal to GGG60) with 60 kgs/mm2 or 80,000 psi tensile strength.
2.The slide ways are heat treated to HRC 45° and that can provide the high accuracy and long service life.
3.Fixed Height, EV vises can be used 2 or more together.
4.EV vise is suitable for CNC Vertical & Horizontal Machine Center.
5.Exchangeable jaws: quick & easy replacement.
6.Step Jaws are optional.SKU: n/a -
SHINE
F348： INTERCHANGEABLE MEDIUM DUTY SMALL DIAMETER LIVE CENTER，F348-2, F348-3, F348-4, F348-5
Type: Interchangeble live center
Duty: MediumApplication CNC lathe and high speed lathe or other lathe machine.
Working Usage Applicable for small dia. and the length less than 300mm medium turning process.
Structure Combination of thrust bearing and needle bearing at front and rear place, and with the design of double supporting point.
Accessories 48 type Tips and 61 type pin punch.
TIR Less than 0.005mm
SKU: n/a -
SHINE
F361: INTERCHANGEABLE MEDIUM DUTY SMALL DIAMETER LIVE CENTER，F361-3, F361-4, F361-5
Type: Interchangeble live center
Duty: MediumApplication CNC lathe and high speed lathe or other lathe machine.
Working Usage Applicable for small dia. and the length less than 300mm medium turning process.
Structure Combination of thrust bearing and needle bearing at the design of double supporting point.front and rear place, and with the design of double supporting point.
Accessories 61 type Tips and 61 type pin punch.
TIR Less than 0.005mm
SKU: n/a -
SHINE
F362: MEDIUM DUTY PRECISE SMALL DIAMETER LIVE CENTER，F362-2, F362-3, F362-4, F362-5
Type: Live centers series
Duty: MediumApplication: CNC lathe, high speed lathe and other lathe
Working Usage: Applicable for small diameter and length less than 300mm medium turning process
Structure: Adopted thrust bearing and needle bearing at front and rear place, with the design of two supporting point
TIR Less than 0.002mm
Inspecting the run out accuracy of the center tip must be under the status of holding the workbar tightly.
SKU: n/a
