Related products
-
SHINE
SC-69-A： MEDIUM DUTY LIVE CENTER WITH DRAW-OFF NUT，SC-69-M-3, SC-69-M-3A, SC-69-M-4, SC-69-M-4A, SC-69-M-5, SC-69-M-5A
SHINESC-69-A： MEDIUM DUTY LIVE CENTER WITH DRAW-OFF NUT，SC-69-M-3, SC-69-M-3A, SC-69-M-4, SC-69-M-4A, SC-69-M-5, SC-69-M-5A
Type: Live centers series
Duty: MediumApplication: CNC lathe, high speed lathe and other lathe.
Working Usage: Applicable for the length less than 400mm ordinary turning process, and slender workpiece turning process.
Structure The radial load and axial load designed separately. Adopted double row ball precision bear and thrust bearing and needle bearing.
Accessories For SC-69-M-3A/4A/5A, Y type spanner
TIR Less than 0.002mm
SKU: n/a -
SHINE
F362: MEDIUM DUTY PRECISE SMALL DIAMETER LIVE CENTER，F362-2, F362-3, F362-4, F362-5
Type: Live centers series
Duty: MediumApplication: CNC lathe, high speed lathe and other lathe
Working Usage: Applicable for small diameter and length less than 300mm medium turning process
Structure: Adopted thrust bearing and needle bearing at front and rear place, with the design of two supporting point
TIR Less than 0.002mm
Inspecting the run out accuracy of the center tip must be under the status of holding the workbar tightly.
SKU: n/a -
SHINE
SC-60： HEAVY DUTY HIGH SPEED STRONG LIVE CENTER，SC-60-H-4, SC-60-H-5, SC-60-H-6A
Type: Live centers series
Duty: HeavyApplication: CNC heavy duty lathe, heavy duty high speed lathe
Working Usage: Applicable for the long workpiece heavy duty turning process
Structure: Combination of angular contact precise high speed ball bearing and needle bearing, with the design of three supporting points
Accessories: For SC-60-H-6A: special Y type spanner
TIR: Less than 0.002mm
SKU: n/a -
SHINE
NCH-61：INTERCHANGEABLE MEDIUM DUTY PRECISION HIGH SPEED LIVE CENTER，NCH-61-3A, NCH-61-4A, NCH-61-5A
SHINENCH-61：INTERCHANGEABLE MEDIUM DUTY PRECISION HIGH SPEED LIVE CENTER，NCH-61-3A, NCH-61-4A, NCH-61-5A
1,For the lubricating oil,SKF-LGMT2 is designated,others aren’t allowed
2,if “A” is behind the center model name,it denotes a draw-off nut attached.
3,About radial force data, please refer to workpiece weight and machining force.
4,if “A” is behind the center interchangeable tip name,it denotes the tip is extended length.
5,About axial force data, please refer to the hydraulic pressure data of the tailstock.
6,For live centers, SKF lubricating oil is designated, it is waterproof.
7,Customized order can be accepted.
8,Subject to technical changes.SKU: n/a
There are no reviews yet.