-25%
AUTOGRIP
RL-N：Short type Rotary Hydraulic Cylinder with Coolant Connection,RL-100N, RL-125N, RL-150N, RL-200N, RL-75N
- To allow coolant to be feed from the rear end of the distributor through the rotating union.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- The rotary cylinder should not run without liquid through coolant port.
$530.00 – $1,499.00
Compare
| Model | RL-100N, RL-125N, RL-150N, RL-200N, RL-75N |
|---|
Based on 0 reviews
Be the first to review “RL-N：Short type Rotary Hydraulic Cylinder with Coolant Connection,RL-100N, RL-125N, RL-150N, RL-200N, RL-75N”
Related products
-
AUTOGRIP
2M：WEDGE-HOOK type Long Stroke 2 Jaw Lathe Chuck,2M-05, 2M-06, 2M-08, 2M-10, 2M-12
2M 2 jaw chuck is a device used in machining and turning operations to hold and secure a workpiece on a lathe or similar machine tool. It is called a “two-jaw” chuck because it consists of two jaws that can be adjusted to grip and center the workpiece.Key features and functions of AUTOGRIP® 2 jaw lathe chuck:
- The primary function of a 2 jaw power chuck is to securely grip the workpiece. The jaws of the chuck can be adjusted independently to hold the workpiece with a firm and concentric grip.
- WEDGE-HOOK type two jaw chuck, and long jaw stroke.
- Matching surfaces of all parts hardened, ground, and lubricated directly.
- High rigidity and high repeatability precision.
- Deliver up to 20% more speed, gripping force, and bore size when compared to conventional chucks.
- Allowing for rapid removal and replacement of workpieces. This feature saves time and enhances efficiency in machining processes.
- Can be flipped around to accommodate different types and sizes of workpieces which increases flexibility and adaptability when machining various parts.
SKU: n/a -
AUTOGRIP
3W：Swing type three jaw Chuck,3W-08, 3W-10, 3W-12, 3W-15, 3W-C08, 3W-C10, 3W-C12, 3W-C15
3W series are special purpose power chucks with innovative ball lock design for gripping tapered casting parts, with self-centering function. 3W can grip the work piece in radial direction and then pull down simultaneously. Gripping on forging or casting part with taper up to 20°, Jaw equalizing: 5° Max. Anti-dust , seal proof and easy to maintain.
3W is a power chuck with self-centering function Grip the work piece in radial direction and then pull down simultaneously. Gripping on forging or casting part with taper up to 20° Jaw equalizing: 5°Max. Anti-dust and Seal proof for cutting fluid, easy to maintain. The 3W power chuck offers an optional on/off feature which allows an easy change from centralizing to compensating (3W-C). 3W-C can offered centralizing and compensating function.- Swing and grasp the workpiece with three jaws. (3W is automatically positioned to the center type)
- The three jaw chuck is suitable for such materials as the casting and forging process.
- The three-jaw chuck is suitable for heavy machining.
- Seal proof for dust and cutting fluid, it is more convenient when maintenance.
- Swing parts are to heat treatment hardened and ground for steel, in order to improve products service life.
- Soft jaw and Gripper are optional.* The type of the gripper is selected according to the work-piece conditions.
- The three jaw chuck can according to different processing requirements, O.D. Gripping and I.D. Gripping can be interchanged.
SKU: n/a -
AUTOGRIP
3J：Finger Power Chuck,3J-05, 3J-06, 3J-08, 3J-10, 3J-12
- Gripping at the end face and preventing deformation of workpiece.
- Suitable for thin wall workpiece processing.
- The gripping compensating mechanism can grasp the irregular surface workpieces well.
- Air-tight pressure detect function is optional.
SKU: n/a
There are no reviews yet.