Machine Tool Vise
Showing 21–40 of 148 results
-
AUTOWELL
AMP：WELLOCK AIR HYDRAULIC POWER VISE,AMP-100, AMP-150, AMP-160, AMP-165, AMP-180, AMP-200, AMP-300
AUTOWELLAMP：WELLOCK AIR HYDRAULIC POWER VISE,AMP-100, AMP-150, AMP-160, AMP-165, AMP-180, AMP-200, AMP-300
1. Most suitable for mass production which need quick machining, such as milling HMC&VMC, expert work station.
2. This vise is adopting the reciprocating pneumatic motor which R&D by inhouse and that employs an air actuated cylinder. Circuiting progressively to make automation, no need the R.F.L unit to filter the moisture, the sole character is superior than other brand in the market.
3. Safety locking mechanism for unexpected termination of air supply. After pneumatic clamping the workpiece will be clamped firmly even without the air supply.
4. Humanistic design. Easy ON/OFF switch control for pneumatic operation. The shifting speed is only 1.5 sec. with safety range: 8mm. The optional electric control for automatic and FMS system is available.
5. AMP are all match vise, you can set up several of AMP together to operate with only one air source supply. 3 operate positions. Six faces of vise body has been ground and pre-set the holding slot, it can be processed vertically without jig block.
6. Even the air source at low pressure 8kg/cm2 which can be achieved super hi-clamping force 90KN, and the 0~90KN clamping force can be adjusted freely by regulator.
7. Unique Out-jaw design increase the clamping capacity.
8. Wellock Semi-spherical segment eliminate deflection and lift.
9. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
SKU: n/a -
HOMGE
ANGLE LOCK DRILL PRESS VISE,HDV-100, HDV-130
- ANGLE LOCK MECHANISM produces downward pressure on Jaw during clamping, ensuring that both Jaws are parallel and work is held accurately.
- Built of high tensile (FCD 55) Ductile Iron.
- Slideways and underside of vise are precision ground.
- The Stepped Jaw Plates are hardened to HRC 50º and precision ground.
SKU: n/a -
AUTOWELL
AOM：EXTENSION MC MECHANICAL POWER VISE,AOM-200
1. Extension MC Mechanical Power Vise with large opening and Lockwell Anti-Lift Mechanism is most suitable for BMC & VMC & HMC. This vise owns3 patents.
2.Force Adjustable System(patented)makes the force setting easier & steadier,moreover,it has constant pressure function & over pressure protection.
3.Mechanical Booster(patented)provides a steady clamping force and inside Disc-Spring to shocks and vibrations while operation.
4.. Lockwell Anti-Lift mechanism (patented) ensures the workpiece does not deflect and lift.
5.This vise is suitable for huge or extension workpieces and can be matched.
6. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
7.The stationary unit or power unit order is acceptable.
SKU: n/a -
AUTOWELL
AQM：AIR POWER VISE,AQM-160G
1. Most suitable for mass production which need quick machine, such as milling VMC and HMC, expert work station.
2. This vise is adopting employs an air actuated cylinder. Circuiting progressively to make automation.
3. Safety locking mechanism for unexpected termination of air supply. After pneumatic clamping the workpiece will be clamped firmly even without the air supply.
4. Humanistic design. Easy ON/OFF switch control for pneumatic operation. The shifting speed is only 1.5 sec. With safety range 5mm. The optional electric control for automatic and FMS system is available.
5. AQM are all match vise, you could set up several of AQM together to operate with only one air source supply. 3 operate positions. Six faces of vise body has been ground and pre-set the holding slot, it can be processed vertically without jig block.
6. Even the air source at low pressure 8kg/cm2 which can be achived super hi-clamping force 90KN, and the 0-35KN clamping force can be adjusted freely by regulator.
7. Unique Out-jaw design increase the clamping capacity.
8. Lockwell Anti-Lift mechanism(patented) ensures the workpiece does not deflect and lift.
9. Rigid and tensile ductile iron FCT-60(80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been carburizing heat treated the gardness to HRC54°.
SKU: n/a -
HOMGE
ASC-K：FIVE-AXIS ADJUSTABLE SELF-CENTERING VISE (ASC-K),ASC-130X310K, ASC-160X310K
- .Vise body is made of High quality Steel (S50C) and its slideways gone through high-frequency hardening to achieve HRC50, which makes the whole part durable.
- 2.Detachable jaws are made of High quality Tool Steel (SCM440) and gone through carburizing to achieve HRC55. Since both sides are fixed size and able to be used as a datum, users can reverse them to increase clamping range.
- 3.The vise’s clamping force can achieve 1300KG, the repeatability positioning precision of its clamping center is within ±0.02mm.
- 4.With the patented center positioning threaded pin, users can regulate clamping center easily and rapidly.
- 5.The 45° dovetail structure with teeth on the upper jaw ensures the bottom of the workpiece to be firmly clamped.
- 6.Applications: precision machining of four-axis, five-axis, CNC indexing table and vertical and horizontal CNC milling machines.
SKU: n/a -
HOMGE
ASC-M：FIVE-AXIS ADJUSTABLE SELF-CENTERING VISE (ASC-M),ASC-127X130M, ASC-127X160M, ASC-127X210M, ASC-127X260M, ASC-150X260M
HOMGEASC-M：FIVE-AXIS ADJUSTABLE SELF-CENTERING VISE (ASC-M),ASC-127X130M, ASC-127X160M, ASC-127X210M, ASC-127X260M, ASC-150X260M
- Vise body is made of High quality Steel (S50C) and its slideways gone through high-frequency hardening to achieve HRC50, which makes the whole part durable.
- 2.Detachable jaws are made of High quality Tool Steel (SCM440) and gone through carburizing to achieve HRC55. Since both sides are fixed size and able to be used as a datum, users can reverse them to increase clamping range.
- 3.The vise’s clamping force can achieve 1300KG, the repeatability positioning precision of its clamping center is within ±0.02mm.
- 4.Users can calibrate the clamping center of vise by adjusting the nut in the middle.
- 5.The 45° dovetail structure with teeth on the upper jaw ensures the bottom of the workpiece to be firmly clamped.
- 6.The vise body can be mounted directly on the machine table by the middle with 2 pieces of M12 screws. This vise also can clamp 2 workpieces by mounting the centre jaw in the middle.
- 7.Applications: precision machining of four-axis, five-axis, CNC indexing table and vertical and horizontal CNC milling machines.
SKU: n/a -
-
AUTOWELL
ATW：WELLOCK LARGE OPENING VISE,ATW-689, ATW-810, ATW-811
ATW-689
1. 8.9” large opening.
2. Spindle nut does not protrude past the end of body.
3. Same distance from keyway to stationary jaw with AT-675.
4. Bed height 73.025±0.012mm (2.875±0.001”).
ATW-810
1. Updated body from AT-80, it provides 10” large opening and steadier vise body.
2. Bed height 84.074±0.012mm (3.26±0.001”).
3.11,600lbs clamping force.
SKU: n/a -
AUTOWELL
AVC：WELLOCK MC MACHINE VISE,AVC-100G/HV, AVC-130G/HV, AVC-160G/HV, AVC-165G/HV, AVC-200G/HV，APC-160G/HV
AUTOWELLAVC：WELLOCK MC MACHINE VISE,AVC-100G/HV, AVC-130G/HV, AVC-160G/HV, AVC-165G/HV, AVC-200G/HV，APC-160G/HV
1. Wellock MC Machine Vise is most suitable for VMC & HMC.
2. Wellock Semi-spherical segment eliminate deflection and lift.
3. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
4. 4 different clamping positions.
5. Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVK：ULTRA-LOW HEIGHT MECHANICAL POWER VISE,AVK-160, AVK-200
- Vise with ultra-low bed height & largest opening.
- Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
- Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
- Lockwell Anti-Lift mechanism (patented) ensures the workpiece does not deflect and lift.
- Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
- Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVL：MC LOCKWELl SUPER VISE,AVL-100G/HV, AVL-125G/HV, AVL-160G/HV, AVL-165G/HV, AVL-180G/HV, AVL-200G/HV, AVL-235G/HV
AUTOWELLAVL：MC LOCKWELl SUPER VISE,AVL-100G/HV, AVL-125G/HV, AVL-160G/HV, AVL-165G/HV, AVL-180G/HV, AVL-200G/HV, AVL-235G/HV
1. MC Lockwell Super Vise is most suitable for VMC & HMC and got patents.
2. Lockwell Anti-Lift Mechanism (patented) ensures the workpiece does not deflect and lift.
3. Unique Out-jaw design increase the clamping capacity.
4. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
5. Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVM：WELLOCK MC MECHANICAL POWER VISE,APV-160G/HV, AVM-100G/HV, AVM-130G/HV, AVM-160G/HV, AVM-165G/HV, AVM-180G/HV, AVM-200G/HV
AUTOWELLAVM：WELLOCK MC MECHANICAL POWER VISE,APV-160G/HV, AVM-100G/HV, AVM-130G/HV, AVM-160G/HV, AVM-165G/HV, AVM-180G/HV, AVM-200G/HV
1. Wellock MC Mechanical Power Vise is most suitable for VMC & HMC and owns 2 patents.
2. Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
3. Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
4. Wellock Semi-spherical segment eliminate deflection and lift.
5. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
6. 4 different clamping positions.
7. Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVQ：MC MECHANICAL POWER VISE,AVQ-100G/HV, AVQ-125G/HV, AVQ-160G/HV, AVQ-200G/HV
1. MC Mechanical Power Vise is most suitable for VMC & HMC and owns 3 patents.
2. Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
3. Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
4. Lockwell Anti-Lift mechanism (patented) ensures the work-piece does not deflect and lift.
5. Unique Out-jaw design increase the clamping capacity.
6. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
7. Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AVR：MC MECHANICAL REVERSED POWER VISE,AVR-125G/HV, AVR-160G/HV
- Most suitable for VMC & HMC and owns 2 patents.
- Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
- Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
- Unique Out-jaw design increase the clamping capacity.
- Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
- Unique design facilitates the evacuation of chips.
SKU: n/a
