AUTOWELL
Showing 1–20 of 36 results
-
AUTOWELL
ACB：MC POWER VISES SYSTEM,ACB-055, ACB-075, ACB-125, ACB-215, ACB-325
Can do 5 Face Machining, Increase Suction, Improve Efficiency1. The all new model Magnetic Clamping Block ACB Series are a new sense of clamping way
for metal working on CNC Machining Center and Milling Machine in quick clamp workpieces.
It can fit well with 5 face machining. Youcan do drilling, tapping, slotting in one time.
Also reduce lots of steps, costs and improve efficiency.2. Free to set up position, numbers and distance of Magnetic Clamping Block according
to the size of workpiece.3. The ACB Series including changeable Induction Soft Block. It can be revised the surface
to be 100% accuracy on the machine for clamp workpieces. Can be also cutting, drilling,
tapping and slotting directly to the Induction Soft Block during machining workpiece.
Multi-function of Induction Soft Block, the user can make it by themselves according to workpiece required.1. Most suitable for medium and large size of workpiece machining on milling machine and CNC machining center.
2. Changeable Induction Soft Block can do multi-function clamping.
3. Minimum size of workpiece required as bigger than an area of two Magnetic Clamping Blocks.
4. The Magnetic Clamping Blocks are not suitable for small workpiece clamping.SKU: n/a -
AUTOWELL
ACR：MC POWER VISES SYSTEM,ACR-125G/HV, ACR-160G/HV
- Most suitable for VMC & HMC and owns 2 patents.
- Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
- Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
- Unique Out-jaw design increase the clamping capacity.
- Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
- Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
ADX：WELLOCK LARGE OPENING VISE,ADX-100, ADX-160(IN), ADX-160(M), ADXR-100, ADXR-160(IN), ADXR-160(M), EDX-160(IN), EDXR-160(IN)
AUTOWELLADX：WELLOCK LARGE OPENING VISE,ADX-100, ADX-160(IN), ADX-160(M), ADXR-100, ADXR-160(IN), ADXR-160(M), EDX-160(IN), EDXR-160(IN)
1. 9″ large opening
2. Spindle nut does not protrude past the end of the body.
3. Same distance from keyway to stationary jaw with ATW-689.
4. Bed heigh 73.025±0.012mm(2.875 ±0.0005″).
5. Anti-lift inside. Wellock Semi-spherical segment eliminate deflection and lift.
6. Rigid and tensile ductile iron FCD-60(80,000PSI) vise body.
7. USA Patent. No. US:D838,5685SKU: n/a -
AUTOWELL
ALD：LOCKWELL DOUBLE STATION VISE,ALD-60G/HV
1. Double station could clamp two dissimilar workpieces with same force at a time and provides 6 different clamping positions.
2. Clamping Force Equalization (patented) ensures same clamping force to clamp two different size/shape workpieces and avoid deflection and lift.
3. Lockwell Anti-Lift Mechanism (patented) & Automatically Return Mechanism (patented) ensures the workpiece does not deflect and lift.
4. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
SKU: n/a -
AUTOWELL
ALQ：MC MECHANICAL LONG POWER VISE,ALQ-160G/HV, ALQ-200G/HV
1. MC Mechanical Long Power vise with large opening and Lockwell Anti-Lift Mechanism is most suitable for VMC & HMC. This vise owns 3 patents and has the honor to get TAIWAN EXCELLENCE 2010.
2. Force Adjustable System (patented) makes the force setting easier & steadier, moreover, it has constant pressure function & over pressure protection.
3. Patented Mechanical Booster is fully sealed against dust, chips and cutting fluid for extended life time.
4. Lockwell Anti-Lift mechanism (patented) ensures the workpiece does not deflect and lift.
5. Unique Out-jaw design increase the clamping capacity.
6. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
7. Unique design facilitates the evacuation of chips.
SKU: n/a -
AUTOWELL
AMP：WELLOCK AIR HYDRAULIC POWER VISE,AMP-100, AMP-150, AMP-160, AMP-165, AMP-180, AMP-200, AMP-300
AUTOWELLAMP：WELLOCK AIR HYDRAULIC POWER VISE,AMP-100, AMP-150, AMP-160, AMP-165, AMP-180, AMP-200, AMP-300
1. Most suitable for mass production which need quick machining, such as milling HMC&VMC, expert work station.
2. This vise is adopting the reciprocating pneumatic motor which R&D by inhouse and that employs an air actuated cylinder. Circuiting progressively to make automation, no need the R.F.L unit to filter the moisture, the sole character is superior than other brand in the market.
3. Safety locking mechanism for unexpected termination of air supply. After pneumatic clamping the workpiece will be clamped firmly even without the air supply.
4. Humanistic design. Easy ON/OFF switch control for pneumatic operation. The shifting speed is only 1.5 sec. with safety range: 8mm. The optional electric control for automatic and FMS system is available.
5. AMP are all match vise, you can set up several of AMP together to operate with only one air source supply. 3 operate positions. Six faces of vise body has been ground and pre-set the holding slot, it can be processed vertically without jig block.
6. Even the air source at low pressure 8kg/cm2 which can be achieved super hi-clamping force 90KN, and the 0~90KN clamping force can be adjusted freely by regulator.
7. Unique Out-jaw design increase the clamping capacity.
8. Wellock Semi-spherical segment eliminate deflection and lift.
9. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
SKU: n/a -
AUTOWELL
AOM：EXTENSION MC MECHANICAL POWER VISE,AOM-200
1. Extension MC Mechanical Power Vise with large opening and Lockwell Anti-Lift Mechanism is most suitable for BMC & VMC & HMC. This vise owns3 patents.
2.Force Adjustable System(patented)makes the force setting easier & steadier,moreover,it has constant pressure function & over pressure protection.
3.Mechanical Booster(patented)provides a steady clamping force and inside Disc-Spring to shocks and vibrations while operation.
4.. Lockwell Anti-Lift mechanism (patented) ensures the workpiece does not deflect and lift.
5.This vise is suitable for huge or extension workpieces and can be matched.
6. Rigid and tensile ductile iron FCD-60 (80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been Carburizing heat treated the hardness to HRC54°.
7.The stationary unit or power unit order is acceptable.
SKU: n/a -
AUTOWELL
AQM：AIR POWER VISE,AQM-160G
1. Most suitable for mass production which need quick machine, such as milling VMC and HMC, expert work station.
2. This vise is adopting employs an air actuated cylinder. Circuiting progressively to make automation.
3. Safety locking mechanism for unexpected termination of air supply. After pneumatic clamping the workpiece will be clamped firmly even without the air supply.
4. Humanistic design. Easy ON/OFF switch control for pneumatic operation. The shifting speed is only 1.5 sec. With safety range 5mm. The optional electric control for automatic and FMS system is available.
5. AQM are all match vise, you could set up several of AQM together to operate with only one air source supply. 3 operate positions. Six faces of vise body has been ground and pre-set the holding slot, it can be processed vertically without jig block.
6. Even the air source at low pressure 8kg/cm2 which can be achived super hi-clamping force 90KN, and the 0-35KN clamping force can be adjusted freely by regulator.
7. Unique Out-jaw design increase the clamping capacity.
8. Lockwell Anti-Lift mechanism(patented) ensures the workpiece does not deflect and lift.
9. Rigid and tensile ductile iron FCT-60(80,000PSI) vise body. Slide surface flame hardened to HS65° to maintain the accuracy. S50C jaw-plate has been carburizing heat treated the gardness to HRC54°.
SKU: n/a -
AUTOWELL
ATW：WELLOCK LARGE OPENING VISE,ATW-689, ATW-810, ATW-811
ATW-689
1. 8.9” large opening.
2. Spindle nut does not protrude past the end of body.
3. Same distance from keyway to stationary jaw with AT-675.
4. Bed height 73.025±0.012mm (2.875±0.001”).
ATW-810
1. Updated body from AT-80, it provides 10” large opening and steadier vise body.
2. Bed height 84.074±0.012mm (3.26±0.001”).
3.11,600lbs clamping force.
SKU: n/a
