Machine Tool Chucks
Showing 101–120 of 218 results
-
CHANDOX
L-R：Solid Rotary Hydraulic Cylinder(BUILT-IN CHECK VALVE),L1020R, L1225R, L1530R, L2035R
1. The solid rotary cylinder has a closed structure and can be installed in either a vertical or horizontal direction.
2. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.
4. Super thin structure：
Super thin outer structure reduces the interference with machines and lowers the burden of machines.。SKU: n/a -
CHANDOX
L-RA,L-RC：Solid Rotary Hydraulic Cylinder(CHECK VALVE),L1020RA, L1020RC, L1225RA, L1225RC, L1530RA, L1530RC
CHANDOXL-RA,L-RC：Solid Rotary Hydraulic Cylinder(CHECK VALVE),L1020RA, L1020RC, L1225RA, L1225RC, L1530RA, L1530RC
L-RA:Air Connection
1. A central output airway is used to actuate the customized jigs or for gap detection.
2. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.
L-RC:Coolant Connection
1. A central output coolant way is used to connect to the front jigs to inject coolant for cleaning chips or performing other tasks.
2. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.SKU: n/a -
CHANDOX
L-RE：Solid Rotary Hydraulic Cylinder(BUILT-IN CHECK VALVE & SENSOR),L1020RE, L1225RE, L1530RE, L2035RE
CHANDOXL-RE：Solid Rotary Hydraulic Cylinder(BUILT-IN CHECK VALVE & SENSOR),L1020RE, L1225RE, L1530RE, L2035RE
1. The solid rotary cylinder has a closed structure and can be installed in either a vertical or horizontal direction.
2. A piston stroke detection device is used to confirm that the clamping device is in the correct position.
3. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
4. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.SKU: n/a -
CHANDOX
L-RE(A)：Compact Solid Rotary Hydraulic Cylinder(BUILT-IN CHECK VALVE & SENSOR),L1330RE, LS1120RE, LS1120REA, LS1221RE, LS1221REA, LS1330REA
CHANDOXL-RE(A)：Compact Solid Rotary Hydraulic Cylinder(BUILT-IN CHECK VALVE & SENSOR),L1330RE, LS1120RE, LS1120REA, LS1221RE, LS1221REA, LS1330REA
REA:Air Connection
1. A central output airway is used to actuate the customized jigs or for gap detection.
2. A piston stroke detection device is used to confirm that the clamping device is in the correct position.
3. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
4. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.
Remark : The chuck adapt with cylinder is “Customize” by customer demandSKU: n/a -
CHANDOX
L：Solid Rotary Hydraulic Cylinders,L0815, L1020, L1225, L1530, L2035
1. The solid rotary cylinder has a closed structure and can be installed in either a vertical or horizontal direction.
2. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.SKU: n/a -
AUTOSTRONG
M：High Speed Through-hole Rotary Hydraulic Cylinder,M0926A, M0928A, M1036, M1038, M1236, M1246, M1546, M1552, M1768, M1870, M1875, M1878, M2078, M2085, M2091, M2511S
AUTOSTRONGM：High Speed Through-hole Rotary Hydraulic Cylinder,M0926A, M0928A, M1036, M1038, M1236, M1246, M1546, M1552, M1768, M1870, M1875, M1878, M2078, M2085, M2091, M2511S
- Compact and lightweight: Comparing with the regular product, it is compact (reduced to MAX 95mm) and lighter (weighted MAX 4.5kg). It’s more stable to reduce the burden of the machinery at high speed turning. The largest bore: Comparing with the regular product, it has about 20% larger bore diameter for utilizing the capacity of machinery. The safety structure: It can retain the gripping force by check valve which prevents the workpiece from flying out when the pressure declining sharply. Reduce the weight of the spindle.
SKU: n/a -
AUTOSTRONG
MA :Compact high speed through hole rotary hydraulic cylinder,MA1453
- The compact hydraulic cylinder which is shorten the length about 30% and light weight can reduce the spindle loading while running in high speed. Safety structure with built-in patented check valve mechanism ensures that pressure is maintained immediately when abnormal power failure. The newly patented model with opened back-end design is convenient for back-mounted bolt.
SKU: n/a -
CHANDOX
MA：2 Actuating Axes Self-Centering Solid Air Chuck Fixtures,MA-06, MA-08, MA-10
2 actuating axes self-centering solid air chuck fixtures is great for machining center. Two pairs of jaws clamp one after another to assure a workpiece to be locked completely.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.4-jaw Clamping and Self-centering：4-jaw clamping are steadier for machining. Two pairs of jaws are moved independently to assure complete lock and self-centering.SKU: n/a -
CHANDOX
MB：3-Jaw Large Throunge Hole Power Chuck Fixture,MB-06, MB-08, MB-10
With built-in type cylinder,it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cyclinder： Inside wall of cyclinder being rustproof treated ;cyclinder can work under wet or high moisture circumstances without rusty or serized trouble.
2.Dusts-proof and Waterproof: Dust-proof and Waterproof structure prevents work-chip and coolant water form entering into inside of chuck cyclinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder: The cylinder is connected to chunk itself directly for obtaining better stability,less space,and higher machining efficiency.SKU: n/a -
CHANDOX
MC：Super Thin Square Chucks,MC-06, MC-08, MC-10, MC-12
1.MC is a fixed-size grinding method: the height tolerance of any point of the square chuck W, X, Y, Z of the same specification is within 0.05mm.
2. MC specifications can be replaced with raw claws to process irregular shapes and replace a large number of jigs on the central machine, which is more economical and convenient.
3. The precision tolerance of repeated clamping by hard claws is within 0.02mm.
4. After side parallel correction, the parallel tolerance of the hard claw clamping is within 0.05mm.SKU: n/a -
CHANDOX
MEL,MELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chuck Fixtures,MEL-06, MEL-08, MEL-10, MELT-06, MELT-08, MELT-10
CHANDOXMEL,MELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chuck Fixtures,MEL-06, MEL-08, MEL-10, MELT-06, MELT-08, MELT-10
1. Crank Type Long Jaw Stroke with the large through-hole.
2. A super long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
3. Install on the hydraulic vertical stationary cylinder to connect the hydraulic pump to actuate the clamping work.SKU: n/a -
AUTOSTRONG
MK：Super high speed through-hole compact rotary hydraulic cylinder,MK1246, MK1246F, MK1452, MK1452F, MK1768, MK1775, MK1778, MK1881
AUTOSTRONGMK：Super high speed through-hole compact rotary hydraulic cylinder,MK1246, MK1246F, MK1452, MK1452F, MK1768, MK1775, MK1778, MK1881
- The compact hydraulic cylinder which is shorten the length about 30% and light weight can reduce the spindle loading while running in high speed. Built-in check valve in safety auto lock and pressure relief valve in case of power failure occurs which prevents the workpiece from flying out. New model developed for rear locking installation.
SKU: n/a -
CHANDOX
ML,MLT：2、3 Jaw Long Stroke Hollow Power Chuck Fixtures,ML-06, ML-08, ML-10, MLT-06, MLT-08, MLT-10
CHANDOXML,MLT：2、3 Jaw Long Stroke Hollow Power Chuck Fixtures,ML-06, ML-08, ML-10, MLT-06, MLT-08, MLT-10
1. A long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
2. For a wedge type, the clamping force is stable.
3. Install on the hydraulic vertical stationary cylinder to connect the hydraulic pump to actuate the clamping work.SKU: n/a -
CHANDOX
MO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
CHANDOXMO,MOT：3-Jaw Hollow Power Chuck Fixtures,MO–05, MO-04, MO-06, MO-08, MO-10, MO-12, MOT-04, MOT-05, MOT-06, MOT-08, MOT-10
With built-in type cylinder, it is ideal for machining application on working table.
1.Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated； cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Benefit of Built-in Cylinder：The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.SKU: n/a -
CHANDOX
MTK,MTK-T：3-Jaw Super Precision Air Chuck Fixtures,MTK-04, MTK-04T, MTK-06, MTK-06T
This product reaches the repeatability of “μdegree”
With built-in type cylinder, it is ideal for machining application on working table.
1.Pre-machined tapped holes and lubrication path：There are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubricate the chuck automatically.
2.Built-in Cylinder： Connect cylinder directly to the chuck for stable gripping.
3.Precise soft jaw positioning：It’s easy to remount soft jaw to the correct position with dowel pins on it.
4.High gripping precision brings better quality and efficiency：Good coaxiality and repeatability of gripping are able to achieve the accuracy of “μ degree machining processes can be simplified or shortened to make high precision machining with high efficiency come true.SKU: n/a -
AUTOSTRONG
N：3-jaw through-hole power chuck (adapter excluded),N-204, N-205, N-206, N-208, N-210, N-212, N-215, N-218, N-220, N-224, N-232
AUTOSTRONGN：3-jaw through-hole power chuck (adapter excluded),N-204, N-205, N-206, N-208, N-210, N-212, N-215, N-218, N-220, N-224, N-232
- Easy to mount. Suitable for long bore or special workpiece. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. The draw nut is customizable.(consult with sales) Standard product 6~10″ made of high strength alloy steel SCM440 from Japan Above 21 inches are made of FCD600. Sliding surfaces, master jaws, and interior parts are hardening and grinding Quick replace cover
SKU: n/a -
CHANDOX
NBK：Powerful Type Super Thin Chucks,NBK-06, NBK-08, NBK-10, NBK-12, NBK-16, NBK-20
1.The handle with an angle of 30 degrees is much convenient for operations.。
2.The “super thin thickness” design of chucks increase the “allowable distance” of machining operations.
3.Chuck flange makes loading and unloading Operations simpler and more convenient.
4.Hard jaws and soft jaws can be used alternatively.SKU: n/a
