Machine Tool Chucks
Showing 81–100 of 130 results
-
CHANDOX
P：Super High Speed Hollow Rotary Hydraulic Cylinders,P0928, P1036, P1246, P1552, P1875, P1878, P2091, P2093, P2511, P2916, P3420
CHANDOXP：Super High Speed Hollow Rotary Hydraulic Cylinders,P0928, P1036, P1246, P1552, P1875, P1878, P2091, P2093, P2511, P2916, P3420
1. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
2. Connect the through hole of cylinder, draw-bar and chuck, then adapt with bar-feeder to achieve the fast loading.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.
L:Longer strokeSKU: n/a -
CHANDOX
PL：3-Jaw Pull Back Power Chucks,PL-06、 PL-08、 PL-10、 PL-12
Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
1.Rust-proof for Pneumatic Cylinder：Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof： Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design：Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor’t deform.SKU: n/a -
CHANDOX
PLVE：3-Jaw Pull Back Power Chuck Fixtures,PLVE-06、 PLVE-08、 PLVE-10
Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
1.Rust-proof for Pneumatic Cylinder：Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design：Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor’t deform.SKU: n/a -
AUTOGRIP
RA：Rotary Pneumatic Cylinder,RA-100, RA-130, RA-17, RA-220, RA-270
- The rotary valve and cylinder body, all made of special light alloy, are light-weight.
- Through unique design, the rotary valve can considerably reduce the waste in compressing air and efficiently increase its utilization.
- When used, a little oil mist should be contained.
SKU: n/a -
AUTOGRIP
RC：Hydraulic Cylinder with Rotating Joint,RC-100, RC-125, RC-145, RC-200, RC-85
-
Center through-hole hydraulic cylinder, suitable for horizontal CNC lathes.
-
Can choose an external rotary joint with either single or double paths.
-
It meets the demand for coolant through spindle and airtight pressure detect function.
-
Has a buil-in check valve for safety.
-
Stroke control via proximity switch or linear positioning system
SKU: n/a -
-
AUTOGRIP
RE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A110, RE-A120, RE-A130
AUTOGRIPRE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A110, RE-A120, RE-A130
- For short form, lightweight, and high-speed rotary cylinder. To allow compressed air to be fed from the rear end of the distributor through the rotating union, suitable for the vertical lathe.
- Built-in safety check valves, pressure relief valves, and proximity sensors.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to the oil tank to avoid back pressure.
- When used, a little oil mist should be contained.
- The rotary cylinder should not run without air passing through the air port.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A150, RE-A200K, RE-A200L, RE-A250
AUTOGRIPRE-A：Compact style Rotary Hydraulic Cylinder with Air Connection and Safety Device,RE-A150, RE-A200K, RE-A200L, RE-A250
- For short form, light weight and high speed rotary cylinder. To allow compressed air to be feed from the rear end of the distributor through the rotating union, suitable for vertical lathe.
- Built-in safety check valves, pressure relief valves and proximity sensor.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to the oil tank to avoid back pressure.
- When used, a little oil mist should be contained.
- The rotary cylinder should not run without air passing through the air port.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RE-L：Compact style Rotary Hydraulic Cylinder with Coolant Connection and Safety Device
- For short form, light weight and high speed rotary cylinder. To allow coolant to be feed from the rear end of the distributor through the rotating union.
- Built-in safety check valves, pressure relief valves and proximity sensor.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- The rotary cylinder should not run without liquid through coolant port.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RE：Compact style Rotary Hydraulic Cylinder with Stroke Control and Safety Device,RE-110, RE-120, RE-130
AUTOGRIPRE：Compact style Rotary Hydraulic Cylinder with Stroke Control and Safety Device,RE-110, RE-120, RE-130
- For short form, light weight and high speed rotary cylinder, suitable for vertical lathe.
- Built-in safety check valves, pressure relief valves and proximity sensor.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a -
AUTOGRIP
RH：Hydraulic Rotary Cylinder,RH-100, RH-125, RH-200, RH-65, RH-80
- High speed cylinder with the rotary valve and cylinder body, all made of special light alloy, light-weight.
- Hydraulic rotary cylinder through unique design, the rotary valve enables the inside bearing to get sufficient lubricating and cooling and endure high-speed rotary for longer service life.
- The drain port should be independently connected to the oil tank to avoid back pressure.
SKU: n/a -
AUTOGRIP
RJ：Coolant Rotating Joint,RJ-80, RJ-92
- Coolant joint for high speed, high pressure and medium delivery.
- Usable for oil and water-soluble coolant.
- Seal bushing inside is made of cemented carbide and ceramics, which provide higher wear-resistance.
- The joint should not run without liquid through coolant port.
SKU: n/a -
AUTOGRIP
RK-N：Short type Rotary Hydraulic Cylinder，RK-100N, RK-125N, RK-150N, RK-200N, RK-250, RK75N
- For short form, light weight and high speed rotary cylinder.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
SKU: n/a -
AUTOGRIP
RK：Short type Rotary Hydraulic Cylinder with Safety Device,RK-100, RK-125, RK-150, RK-200, RK-250, RK-75
AUTOGRIPRK：Short type Rotary Hydraulic Cylinder with Safety Device,RK-100, RK-125, RK-150, RK-200, RK-250, RK-75
- For short form, light weight and high speed rotary cylinder.
- Built-in safety check valves and pressure relief valves.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
SKU: n/a -
AUTOGRIP
RL-N：Short type Rotary Hydraulic Cylinder with Coolant Connection,RL-100N, RL-125N, RL-150N, RL-200N, RL-75N
AUTOGRIPRL-N：Short type Rotary Hydraulic Cylinder with Coolant Connection,RL-100N, RL-125N, RL-150N, RL-200N, RL-75N
- To allow coolant to be feed from the rear end of the distributor through the rotating union.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- The rotary cylinder should not run without liquid through coolant port.
SKU: n/a -
AUTOGRIP
RL：Short type Rotary Hydraulic Cylinder with Coolant Connection and Safety Device,RL-100, RL-125, RL-150, RL-200, RL-75
AUTOGRIPRL：Short type Rotary Hydraulic Cylinder with Coolant Connection and Safety Device,RL-100, RL-125, RL-150, RL-200, RL-75
- To allow coolant to be feed from the rear end of the distributor through the rotating union
- Built-in safety check valves and pressure relief valves.
- The drain port should be independently connected to oil tank to avoid back pressure.
- The rotary cylinder should not run without liquid through coolant port.
SKU: n/a -
AUTOGRIP
RS-N：Short type Rotary Hydraulic Cylinder with Stroke Control，RS-100N, RS-125N, RS-150N, RS-200N, RS-6520N, RS-6530N, RS-7530N, RS-75N
AUTOGRIPRS-N：Short type Rotary Hydraulic Cylinder with Stroke Control，RS-100N, RS-125N, RS-150N, RS-200N, RS-6520N, RS-6530N, RS-7530N, RS-75N
- For short form, high speed and stroke control.
- With proximity sensor , the movement of the position is easy to adjust and confirm when operating.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- Stroke Detection Type can be customized to Linear Positioning System.
SKU: n/a
