Machine Tool Chucks
Showing 17–32 of 219 results
-
AUTOGRIP
3U-K：Pull Lock Power Chuck,3U-205K, 3U-206K, 3U-208K, 3U-210K, 3U-212K
- Pin-Arbor Draw Down type 3-jaw non-thru-hole power chuck.
- High radial gripping force and high accuracy.
- Suitable for heavy machining.
- Can work with the airtight detection device to perform axial position confirm, suitable for the precision of large length size process.
SKU: n/a -
-
AUTOGRIP
3W：Swing type three jaw Chuck,3W-08, 3W-10, 3W-12, 3W-15, 3W-C08, 3W-C10, 3W-C12, 3W-C15
3W series are special purpose power chucks with innovative ball lock design for gripping tapered casting parts, with self-centering function. 3W can grip the work piece in radial direction and then pull down simultaneously. Gripping on forging or casting part with taper up to 20°, Jaw equalizing: 5° Max. Anti-dust , seal proof and easy to maintain.
3W is a power chuck with self-centering function Grip the work piece in radial direction and then pull down simultaneously. Gripping on forging or casting part with taper up to 20° Jaw equalizing: 5°Max. Anti-dust and Seal proof for cutting fluid, easy to maintain. The 3W power chuck offers an optional on/off feature which allows an easy change from centralizing to compensating (3W-C). 3W-C can offered centralizing and compensating function.- Swing and grasp the workpiece with three jaws. (3W is automatically positioned to the center type)
- The three jaw chuck is suitable for such materials as the casting and forging process.
- The three-jaw chuck is suitable for heavy machining.
- Seal proof for dust and cutting fluid, it is more convenient when maintenance.
- Swing parts are to heat treatment hardened and ground for steel, in order to improve products service life.
- Soft jaw and Gripper are optional.* The type of the gripper is selected according to the work-piece conditions.
- The three jaw chuck can according to different processing requirements, O.D. Gripping and I.D. Gripping can be interchanged.
SKU: n/a -
AUTOGRIP
4H：4-JAW LARGE THRU-HOLE POWER CHUCK,4H-12, 4H-15, 4H-18, 4H-206, 4H-208, 4H-210
- WEDGE-HOOK type 4-jaw with the extra large through-hole.
- Matching surfaces of all parts hardened, ground and lubricated directly.
- High rigidity and high repeatability precision.
- J is the hole diameter of blank draw nut,
- If not notified, Autogrip will adopt the K Default as K value.
- K max is the maximum thread specification, and it could be customize.
SKU: n/a -
AUTOGRIP
4T：4 Jaw Two Motion Type Independent Chuck,4T-08, 4T-10, 4T-12, 4T-15
- CRANK type with two pairs of 2 jaws self-center independent of each other.
- The 4T series jaw chuck is suitable for square bars and other nonuniform-shaped workpieces.
- Precisely center cylindrical stock to within the limits of the lathe’s accuracy.
- Form rectangular shaped objects.
SKU: n/a
