Machine Tool Chucks
Showing 1–20 of 130 results
-
-
AUTOGRIP
2D：Pull Down Power Chuck,2D-06, 2D-08, 2D-10
- Radial clamp and axial pull down at the same time, keep the workpiece attaching close to the base surface of the chuck.
- Almost no workpiece uplifting displacement.
- The body and the cylinder pull-down mechanism are heat-treated and fine boring, which guarantee the clamping precision and durableness.
- Airtight pressure detect function is optional.
SKU: n/a -
AUTOGRIP
2H：2-JAW LARGE THRU-HOLE POWER CHUCK,2H-12, 2H-15, 2H-204, 2H-205, 2H-206, 2H-208, 2H-210
- WEDGE-HOOK type 2-jaw with the extra large through-hole.
- Matching surfaces of all parts hardened, ground and lubricated directly.
- High rigidity and high repeatability precision.
- J is the hole diameter of blank draw nut,
- If not notified, Autogrip will adopt the K Default as K value.
- K max is the maximum thread specification, and it could be customize.
SKU: n/a -
AUTOGRIP
2J：Finger Power Chuck，2J-05, 2J-06, 2J-08, 2J-10, 2J-12
- This finger power chuck is specifically designed for the automatic loading and unloading system and can work with the robotic arm.
- Gripping at the end face and preventing deformation of the workpiece.
- Suitable for thin wall workpiece processing.
- The gripping compensating mechanism can grasp the irregular surface workpieces well.
- The air-tight pressure detection function is optional, it can avoid excessive swarf and chips when machining.
SKU: n/a -
AUTOGRIP
2L：CRANK type 2-Jaw Extra Long Jaw Stroke Thru-Hole Power,2L-12, 2L-15, 2L-205, 2L-206, 2L-208, 2L-210
AUTOGRIP2L：CRANK type 2-Jaw Extra Long Jaw Stroke Thru-Hole Power,2L-12, 2L-15, 2L-205, 2L-206, 2L-208, 2L-210
- CRANK type 2-jaw with the large through-hole, and extra long jaw stroke.
- Matching surfaces of all parts hardened, ground and lubricated directly.
- High rigidity and high repeatability precision.
SKU: n/a -
AUTOGRIP
2M：WEDGE-HOOK type Long Stroke 2 Jaw Lathe Chuck,2M-05, 2M-06, 2M-08, 2M-10, 2M-12
2M 2 jaw chuck is a device used in machining and turning operations to hold and secure a workpiece on a lathe or similar machine tool. It is called a “two-jaw” chuck because it consists of two jaws that can be adjusted to grip and center the workpiece.Key features and functions of AUTOGRIP® 2 jaw lathe chuck:
- The primary function of a 2 jaw power chuck is to securely grip the workpiece. The jaws of the chuck can be adjusted independently to hold the workpiece with a firm and concentric grip.
- WEDGE-HOOK type two jaw chuck, and long jaw stroke.
- Matching surfaces of all parts hardened, ground, and lubricated directly.
- High rigidity and high repeatability precision.
- Deliver up to 20% more speed, gripping force, and bore size when compared to conventional chucks.
- Allowing for rapid removal and replacement of workpieces. This feature saves time and enhances efficiency in machining processes.
- Can be flipped around to accommodate different types and sizes of workpieces which increases flexibility and adaptability when machining various parts.
SKU: n/a -
-
AUTOSTRONG
3-jaw extra large through-hole power chuck,NB-208A6, NB-210A8, NB-212A11, NB-212A8, NB-215A15, NB-218A15, NB-306A5, NB-306A6, NB-310A8
AUTOSTRONG3-jaw extra large through-hole power chuck,NB-208A6, NB-210A8, NB-212A11, NB-212A8, NB-215A15, NB-218A15, NB-306A5, NB-306A6, NB-310A8
- More large bore: the large bore in wedge type power operated chucks. 20% large bore: approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks. Adapter for A2 spindle(DIN 55026) Easy to mount. Can be equipped with automatic feeder to increase productivity. Can be equipped with back gauge. Replaceable for Japanese brands. The draw nut is customizable.(consult with sales) Standard product 6~10″ made of high strength alloy steel SCM440 from Japan Sliding surfaces, master jaws and interior parts are hardened treatment
SKU: n/a -
AUTOGRIP
3D：Pull Down Power Chuck,3D-04, 3D-05, 3D-06, 3D-08, 3D-10, 3D-12, 3D-15
- Radial clamp and axial pull down at the same time, keep the workpiece attaching close to the base surface of the chuck.
- Almost no workpiece uplifting displacement.
- The pull down chuck’s body and the cylinder pull-down mechanism are heat-treated and fine boring, which guarantees the clamping precision and durableness.
- The airtight pressure detection function is optional.
SKU: n/a -
AUTOGRIP
3H：LARGE THRU-HOLE POWER CHUCK,3H-204、 3H-205、 3H-206、 3H-208、 3H-210、 3H-212、 3H-215
- WEDGE-HOOK type 3-jaw with the extra large through-hole.
- Matching surfaces of all parts hardened, ground and lubricated directly.
- High rigidity and high repeatability precision.
- J is the hole diameter of blank draw nut,
- If not notified, Autogrip will adopt the K Default as K value.
- K max is the maximum thread specification, and it could be customize.
SKU: n/a -
AUTOGRIP
3J：Finger Power Chuck,3J-05, 3J-06, 3J-08, 3J-10, 3J-12
- Gripping at the end face and preventing deformation of workpiece.
- Suitable for thin wall workpiece processing.
- The gripping compensating mechanism can grasp the irregular surface workpieces well.
- Air-tight pressure detect function is optional.
SKU: n/a -
AUTOGRIP
3L：CRANK type Extra Long Stroke Thru-Hole 3-Jaw Power Chuck,3L-205, 3L-206, 3L-208, 3L-210, 3L-212, 3L-215
AUTOGRIP3L：CRANK type Extra Long Stroke Thru-Hole 3-Jaw Power Chuck,3L-205, 3L-206, 3L-208, 3L-210, 3L-212, 3L-215
Our 3 jaw lathe chuck is widely used for Lathes and milling machines, it is best for holding and rotating the workpiece during machining operations such as turning, thread cutting, facing, boring, drilling, grinding, and parting.
- Crankshaft three jaw lathe chuck with the large through-hole, and extra-long jaw stroke.
- 3 jaw power chuck has the same self-centering chuck, its jaws are interconnected via a scroll gear and can move at the same time.
- Matching surfaces of all parts hardened, ground, and lubricated directly.
- High rigidity and high repeatability precision.
- three jaw chuck is the best option for holding circular or hexagonal cross-sections
- 3 jaw lathe chuck with an accuracy level of around 0.010
- J is the hole diameter of the blank draw nut, K is the maximum thread specification, and it could be customized.
SKU: n/a -
-
AUTOGRIP
3N：Inclined Master Jaws Power Chuck,3N-06, 3N-08, 3N-10
- The surface of the center through cover is grinding treated, it can be the position base surface of the jig/workpiece.
- The slideway of main jaws is inclined. It improves the clamping force and reduces the upfloat situation of the workpiece.
- Work with standard top jaws.
- Airtight pressure detect function is optional.
- External gripping only.
SKU: n/a -
AUTOGRIP
3U-K：Pull Lock Power Chuck,3U-205K, 3U-206K, 3U-208K, 3U-210K, 3U-212K
- Pin-Arbor Draw Down type 3-jaw non-thru-hole power chuck.
- High radial gripping force and high accuracy.
- Suitable for heavy machining.
- Can work with the airtight detection device to perform axial position confirm, suitable for the precision of large length size process.
SKU: n/a -
-
AUTOGRIP
3W：Swing type three jaw Chuck,3W-08, 3W-10, 3W-12, 3W-15, 3W-C08, 3W-C10, 3W-C12, 3W-C15
3W series are special purpose power chucks with innovative ball lock design for gripping tapered casting parts, with self-centering function. 3W can grip the work piece in radial direction and then pull down simultaneously. Gripping on forging or casting part with taper up to 20°, Jaw equalizing: 5° Max. Anti-dust , seal proof and easy to maintain.
3W is a power chuck with self-centering function Grip the work piece in radial direction and then pull down simultaneously. Gripping on forging or casting part with taper up to 20° Jaw equalizing: 5°Max. Anti-dust and Seal proof for cutting fluid, easy to maintain. The 3W power chuck offers an optional on/off feature which allows an easy change from centralizing to compensating (3W-C). 3W-C can offered centralizing and compensating function.- Swing and grasp the workpiece with three jaws. (3W is automatically positioned to the center type)
- The three jaw chuck is suitable for such materials as the casting and forging process.
- The three-jaw chuck is suitable for heavy machining.
- Seal proof for dust and cutting fluid, it is more convenient when maintenance.
- Swing parts are to heat treatment hardened and ground for steel, in order to improve products service life.
- Soft jaw and Gripper are optional.* The type of the gripper is selected according to the work-piece conditions.
- The three jaw chuck can according to different processing requirements, O.D. Gripping and I.D. Gripping can be interchanged.
SKU: n/a
