CHANDOX
Showing 41–55 of 55 results
-
CHANDOX
PL：3-Jaw Pull Back Power Chucks,PL-06、 PL-08、 PL-10、 PL-12
Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
1.Rust-proof for Pneumatic Cylinder：Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof： Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design：Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor’t deform.SKU: n/a -
CHANDOX
PLVE：3-Jaw Pull Back Power Chuck Fixtures,PLVE-06、 PLVE-08、 PLVE-10
Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
1.Rust-proof for Pneumatic Cylinder：Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof：Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design：Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor’t deform.SKU: n/a -
CHANDOX
RT：Rotary air chuck fixtures ( intermittent operation ),RT-05, RT-06, RT-08
INTERMITTENT OPERATION
Suitable for light cutting
It’s ldeal for dividing or cutting work pieces by mounting the chuck on indexing table or rotary table. The distinctive feature is that chuck rotates with the spindle of indexing table or rotary table.
1.The chuck is designed for intermittently rotate in limited rotary speed with rotary table.
2.Rustproof treated cylinder : The cylinder won’t get rusty and seized even in wet or hign moisture working environment.
3.Integral pneumatic cylinder :Connect chuck and built-in cylinder to each other directly;thus enables operation stability.Moreover,it is more convenient for installation and operation since the use of draw tube and draw bar are no longer necessary.SKU: n/a -
CHANDOX
RTS,RTS-T：Rorary air chuck fixtures,RTS-05, RTS-05T, RTS-06, RTS-06T, RTS-08, RTS-10
LOW TORQUE、BULIT-IN CHECK VALVE CONTINUOUS ROTATING
1.When The Chuck is Rotating Continuously: Higher rotation speed to fit with more kind of working, the rotating speed has to be within the max speed limit.
2.Built-in Check Valve: Design with built-in Check Valve. It’s doesn’t need to supply the air continuously and remain low working torque also reduce the air consumption.
3.Dustproof and Drainage Patent Structure: This can prevent the metal chips and coolant get into the chuck inside while processing, and maintain.
4.Integral Pneumatic Cylinder: Connect chuck and built-in cylinder to each other directly; thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of a drawtube and drawbar are no longer necessary.
5.Rustproof Treated Cylinder: The cylinder won’t get rusty and seized even wet or high moisture working environment.SKU: n/a -
CHANDOX
SE：Super Thin Chucks,SE-02、 SE-03、 SE-04、 SE-04ST、 SE-05、 SE-06
1.By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2.Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3.Chuck body is made of very durable steel.
4.Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5.2″ chucks can even grip up to the smallest size of 0.8mm.SKU: n/a -
CHANDOX
ST：Stainless Steel Super Thin Chucks,ST-02, ST-03, ST-04, ST-05, ST-06
1. By the compactness comes from “ Light, Thin, Short, Small” designing concept; the chucks are most fitting to hold work pieces for measuring.
2. Just rotate the chuck knob directly for gripping and loosening, A handle is not necessary to be used.
3. The stainless steel body can be placed in electrical discharge machining fluid
4. Jaws can be reversibly used; gripping of various sizes becomes much convenient.
5. 2″ chucks can even grip up to the smallest size of 0.8mm.
SKU: n/a -
CHANDOX
TK,TK-T：2、3-Jaw Super Precision Air Chucks,TK-04, TK-04T, TK-06, TK-06T, TK-08, TK-08T
This product reaches the repeatability of “μ degree”
1.Pre-machined tapped holes and lubrication path：There are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubricate the chuck automatically.
2.Built-in Cylinder：Connect cylinder directly to the chuck for stable gripping.
3.Precise soft jaw positioning：It’s easy to remount soft jaw to the correct position with dowel pins on it.
4.High gripping precision brings better quality and efficiency：Good coaxiality and repeatability of gripping are able to achieve the accuracy of “μ degree machining processes can be simplified or shortened to make high precision machining with high efficiency come true.SKU: n/a -
CHANDOX
VL-DP：3-Jaw Solid Chuck with Anti-chips Sealed & Water-proof Flange Plate for Vertical Lathe,VL-12DP, VL-15DP, VL-18DP, VL-21DP, VL-24DP, VL-32DP
CHANDOXVL-DP：3-Jaw Solid Chuck with Anti-chips Sealed & Water-proof Flange Plate for Vertical Lathe,VL-12DP, VL-15DP, VL-18DP, VL-21DP, VL-24DP, VL-32DP
1.The dustproof patent structure can prevent the metal chips get into the chuck inside.
2.The clean hole design can blow air into the chuck internal to clean out the residual chips and coolant.
3.The drainage plate structure design can prevent the coolant get into the spindle internally.SKU: n/a
