Live-Center For Lathe
Showing 21–40 of 63 results
-
SHINE
F361: INTERCHANGEABLE MEDIUM DUTY SMALL DIAMETER LIVE CENTER，F361-3, F361-4, F361-5
Type: Interchangeble live center
Duty: MediumApplication CNC lathe and high speed lathe or other lathe machine.
Working Usage Applicable for small dia. and the length less than 300mm medium turning process.
Structure Combination of thrust bearing and needle bearing at the design of double supporting point.front and rear place, and with the design of double supporting point.
Accessories 61 type Tips and 61 type pin punch.
TIR Less than 0.005mm
SKU: n/a -
SHINE
F362: MEDIUM DUTY PRECISE SMALL DIAMETER LIVE CENTER，F362-2, F362-3, F362-4, F362-5
Type: Live centers series
Duty: MediumApplication: CNC lathe, high speed lathe and other lathe
Working Usage: Applicable for small diameter and length less than 300mm medium turning process
Structure: Adopted thrust bearing and needle bearing at front and rear place, with the design of two supporting point
TIR Less than 0.002mm
Inspecting the run out accuracy of the center tip must be under the status of holding the workbar tightly.
SKU: n/a -
SHINE
F363：MEDIUM DUTY PRECISE SMALL DIAMETER LONG NOSE LIVE CENTER，F363-2, F363-3, F363-4, F363-5
Type: Live centers series
Duty: MediumApplication CNC lathe, high speed lathe and other lathe
Working Usage Applicable for small diameter and length less than 300mm medium turning process
Structure: Adopted thrust bearing and needle bearing at front and rear place, with the design of two supporting point
TIR: Less than 0.002mm
SKU: n/a -
-
-
LI-HSUN
NC/NCD：LATHE MEDIUM-LOAD CENTER-NC TYPE,NC-MT.4A, NC-MT.4B, NC-MT.5A, NC-MT.5B, NCD-MT.4, NCD-MT.5
LI-HSUNNC/NCD：LATHE MEDIUM-LOAD CENTER-NC TYPE,NC-MT.4A, NC-MT.4B, NC-MT.5A, NC-MT.5B, NCD-MT.4, NCD-MT.5
- Front end is fitted with angular contact ball bearing, thrust bearing and needle bearing.
- Suitable for CNC lathes at high-speed and medium-load. The waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
SKU: n/a -
LI-HSUN
NCF/NCFP：LATHE HEAVY-LOAD CENTER-NCF TYPE,NCF-MT.3A, NCF-MT.3B, NCF-MT.4A, NCF-MT.4B, NCF-MT.5A, NCFP-MT.4, NCFP-MT.5
LI-HSUNNCF/NCFP：LATHE HEAVY-LOAD CENTER-NCF TYPE,NCF-MT.3A, NCF-MT.3B, NCF-MT.4A, NCF-MT.4B, NCF-MT.5A, NCFP-MT.4, NCFP-MT.5
- The shaft is made of alloy steel and through vacuum heat treatment (HRC60°±1°). It possesses great rigidity and high durability.
- Front end is fitted with angular contact ball bearing & thrust bearing. Middle & Rear needle bearing and the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
SKU: n/a -
SHINE
NCH-61：INTERCHANGEABLE MEDIUM DUTY PRECISION HIGH SPEED LIVE CENTER，NCH-61-3A, NCH-61-4A, NCH-61-5A
SHINENCH-61：INTERCHANGEABLE MEDIUM DUTY PRECISION HIGH SPEED LIVE CENTER，NCH-61-3A, NCH-61-4A, NCH-61-5A
1,For the lubricating oil,SKF-LGMT2 is designated,others aren’t allowed
2,if “A” is behind the center model name,it denotes a draw-off nut attached.
3,About radial force data, please refer to workpiece weight and machining force.
4,if “A” is behind the center interchangeable tip name,it denotes the tip is extended length.
5,About axial force data, please refer to the hydraulic pressure data of the tailstock.
6,For live centers, SKF lubricating oil is designated, it is waterproof.
7,Customized order can be accepted.
8,Subject to technical changes.SKU: n/a -
SHINE
NCH-62 ：HEAVY DUTY PRECISE HIGH SPEED LIVE CENTER，NCH-62-3A, NCH-62-4A, NCH-62-5A
Type: Live centers series
Duty: HeavyApplication: CNC lathe, high speed lathe
Working Usage: Applicable for high speed and high precision workpiece turning process
Structure: Combination of angular contact ball precise high speed bearing and needle bearing
Accessories: Y type spanner
TIR: Less than 0.002mm
SKU: n/a -
LI-HSUN
NCH：LATHE HIGH-SPEED, WATER-PROOF CENTER-NCH TYPE,NCH-MT.2A, NCH-MT.3A, NCH-MT.3B, NCH-MT.4A, NCH-MT.4B, NCH-MT.5A, NCH-MT.5B, NCH-MT.6A
LI-HSUNNCH：LATHE HIGH-SPEED, WATER-PROOF CENTER-NCH TYPE,NCH-MT.2A, NCH-MT.3A, NCH-MT.3B, NCH-MT.4A, NCH-MT.4B, NCH-MT.5A, NCH-MT.5B, NCH-MT.6A
- Center shaft is made of alloy steel and hardened through vacuum heat treatment to provide higher rigidity HRC60°±1°
- Center is fitted with dual ball bearing, thrust bearing and needle roller bearing assembly, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
SKU: n/a -
LI-HSUN
NCK：LATHE CENTER HIGH-PERFORMANCE-NCK TYPE，NCK-MT.2A, NCK-MT.3A, NCK-MT.3B, NCK-MT.4A, NCK-MT.4B, NCK-MT.5A, NCK-MT.5B, NCK-MT.6A
LI-HSUNNCK：LATHE CENTER HIGH-PERFORMANCE-NCK TYPE，NCK-MT.2A, NCK-MT.3A, NCK-MT.3B, NCK-MT.4A, NCK-MT.4B, NCK-MT.5A, NCK-MT.5B, NCK-MT.6A
- The shaft is made of alloy steel and through vacuum heat treatment HRC60°±1°. It processes great rigidity and high durability.
- The center uses the combination of roller bearings, thrust ball bearing, the tailstock pressure of lathe adjusts to five to eight kilograms (for reference).
※ NCK-B type: Long nose live centers are suitable for small workpieces.
SKU: n/a -
LI-HSUN
NCR：LATHE ADJUSTMENT WATER-PROOF CENTER-NCR TYPE，NCR-MT.3A, NCR-MT.3B, NCR-MT.4A, NCR-MT.4B, NCR-MT.5A, NCR-MT.5B, NCR-MT.6A
LI-HSUNNCR：LATHE ADJUSTMENT WATER-PROOF CENTER-NCR TYPE，NCR-MT.3A, NCR-MT.3B, NCR-MT.4A, NCR-MT.4B, NCR-MT.5A, NCR-MT.5B, NCR-MT.6A
- The shaft uses alloy steel and hardened through vacuum heat treatment to (HRC60°±1°).
- Uses the combination of taper roller bearing, thrust bearing and needle bearing.
- Applicable to medium and heavy loads, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
- Adjustable to reach original loading capacity after using for a long period of time.
SKU: n/a -
LI-HSUN
NCS：INTERCHANGEABLE HIGH-SPEED LIVE CENTER (WITH NUT),NCS-MT.3, NCS-MT.4, NCS-MT.4P, NCS-MT.4PT, NCS-MT.4T, NCS-MT.5P, NCS-MT.5PT
LI-HSUNNCS：INTERCHANGEABLE HIGH-SPEED LIVE CENTER (WITH NUT),NCS-MT.3, NCS-MT.4, NCS-MT.4P, NCS-MT.4PT, NCS-MT.4T, NCS-MT.5P, NCS-MT.5PT
- Center shaft is made of alloy steel and hardened through vacuum heat treatment to provide higher rigidity HRC60°±1°
- Center is fitted with dual ball bearing, thrust bearing and needle roller bearing assembly, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
SKU: n/a -
LI-HSUN
NHD：LATHE AUTO ADJUSTABLE TRANSMISSION CENTER-NHD TYPE，NHD31 MT.4, NHD32 MT.4, NHD33 MT.4, NHD34 MT.4
LI-HSUNNHD：LATHE AUTO ADJUSTABLE TRANSMISSION CENTER-NHD TYPE，NHD31 MT.4, NHD32 MT.4, NHD33 MT.4, NHD34 MT.4
LATHE AUTO ADJUSTABLE TRANSMISSION CENTER-NHD TYPE
- Suitable for the asperities of the workpieces. The auto adjustable transmission center with 5T and 6T design on end surface is able to adjust the stress point so that the workpieces will be done easily.
- The inside structure of the center is comprised of PU. It is nearly free of break-down and is durable and easy to fix.
- Accuracy : 0.008mm
SKU: n/a -
LI-HSUN
NK,NKS：LATHE ROLLING CENTER-NK A/B TYPE，NK-MT.2A, NK-MT.3A, NK-MT.3B, NK-MT.4A, NK-MT.4B, NK-MT.5A, NKS-MT.2, NKS-MT.3, NKS-MT.4
LI-HSUNNK,NKS：LATHE ROLLING CENTER-NK A/B TYPE，NK-MT.2A, NK-MT.3A, NK-MT.3B, NK-MT.4A, NK-MT.4B, NK-MT.5A, NKS-MT.2, NKS-MT.3, NKS-MT.4
- Center shaft and main body are made of bearing alloy steel and hardened to(HRC60°±1°)
- Center is assembled with thrust bearing, needle bearing and ball bearing.
- Applicable to medium and high speed laths with heavy loads.
- The tailstock pressure of lathe adjusts to five to eight kilograms (for reference)
※ NK-B TYPE: Long nose live centers are suitable for small workpieces.
SKU: n/a -
LI-HSUN
PC：LATHE NORMAL CENTER-PC TYPE，PC-MT.1, PC-MT.2, PC-MT.3, PC-MT.4, PC-MT.5, PC-MT.6
- Center is made of Cr-Mo steel and hardened to HRC58°～60°
- Center is assembled with ball bearings.
- Applicable to medium and high speed lathes with light duty.
- The tailstock pressure of lathe adjusts to five to eight kilograms (for reference).
SKU: n/a -
SHINE
SC-60： HEAVY DUTY HIGH SPEED STRONG LIVE CENTER，SC-60-H-4, SC-60-H-5, SC-60-H-6A
Type: Live centers series
Duty: HeavyApplication: CNC heavy duty lathe, heavy duty high speed lathe
Working Usage: Applicable for the long workpiece heavy duty turning process
Structure: Combination of angular contact precise high speed ball bearing and needle bearing, with the design of three supporting points
Accessories: For SC-60-H-6A: special Y type spanner
TIR: Less than 0.002mm
SKU: n/a
