-30%
LI-HSUN
DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4
LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)
- Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1° - Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
- Applicable for gear hobbing machine.
- Accuracy : 0.008mm
$280.00 $400.00
| Model | DKS301-MT.4 |
|---|
Based on 0 reviews
Be the first to review “DKS：LATHE WORK-DRIVING CENTER-DKS TYPE (CHANGEABLE TIPS)，DKS301-MT.4”
Related products
-
LI-HSUN
PC：LATHE NORMAL CENTER-PC TYPE，PC-MT.1, PC-MT.2, PC-MT.3, PC-MT.4, PC-MT.5, PC-MT.6
- Center is made of Cr-Mo steel and hardened to HRC58°～60°
- Center is assembled with ball bearings.
- Applicable to medium and high speed lathes with light duty.
- The tailstock pressure of lathe adjusts to five to eight kilograms (for reference).
SKU: n/a -
LI-HSUN
NC/NCD：LATHE MEDIUM-LOAD CENTER-NC TYPE,NC-MT.4A, NC-MT.4B, NC-MT.5A, NC-MT.5B, NCD-MT.4, NCD-MT.5
LI-HSUNNC/NCD：LATHE MEDIUM-LOAD CENTER-NC TYPE,NC-MT.4A, NC-MT.4B, NC-MT.5A, NC-MT.5B, NCD-MT.4, NCD-MT.5
- Front end is fitted with angular contact ball bearing, thrust bearing and needle bearing.
- Suitable for CNC lathes at high-speed and medium-load. The waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
SKU: n/a -
LI-HSUN
NK,NKS：LATHE ROLLING CENTER-NK A/B TYPE，NK-MT.2A, NK-MT.3A, NK-MT.3B, NK-MT.4A, NK-MT.4B, NK-MT.5A, NKS-MT.2, NKS-MT.3, NKS-MT.4
LI-HSUNNK,NKS：LATHE ROLLING CENTER-NK A/B TYPE，NK-MT.2A, NK-MT.3A, NK-MT.3B, NK-MT.4A, NK-MT.4B, NK-MT.5A, NKS-MT.2, NKS-MT.3, NKS-MT.4
- Center shaft and main body are made of bearing alloy steel and hardened to(HRC60°±1°)
- Center is assembled with thrust bearing, needle bearing and ball bearing.
- Applicable to medium and high speed laths with heavy loads.
- The tailstock pressure of lathe adjusts to five to eight kilograms (for reference)
※ NK-B TYPE: Long nose live centers are suitable for small workpieces.
SKU: n/a -
LI-HSUN
BC：LATHE BULL NOSE CENTER-BC TYPE，BC106-MT.3, BC106-MT.4, BC106-MT.5, BC128-MT.4, BC128-MT.5, BC156-MT.4, BC156-MT.5, BC206-MT.4, BC206-MT.5, BC206-MT.6, BC258-MT.4, BC258-MT.5, BC258-MT.6, BC306-MT.5, BC306-MT.6, BC50-MT.2, BC50-MT.3, BC50-MT.4, BC63-MT.2, BC63-MT.3, BC63-MT.4, BC78-MT.3, BC78-MT.4
LI-HSUNBC：LATHE BULL NOSE CENTER-BC TYPE，BC106-MT.3, BC106-MT.4, BC106-MT.5, BC128-MT.4, BC128-MT.5, BC156-MT.4, BC156-MT.5, BC206-MT.4, BC206-MT.5, BC206-MT.6, BC258-MT.4, BC258-MT.5, BC258-MT.6, BC306-MT.5, BC306-MT.6, BC50-MT.2, BC50-MT.3, BC50-MT.4, BC63-MT.2, BC63-MT.3, BC63-MT.4, BC78-MT.3, BC78-MT.4
- The tip of bull nose center uses Cr-Mo steel and hardened to (HRC60°±1°).
- Uses a combination of taper roller bearing and ball bearing.
- Applicable to pipes turning.
- The tailstock pressure of lathe adjusts to six to ten kilograms. (for reference)
SKU: n/a
There are no reviews yet.