-47%
LI-HSUN
DK：LATHE DEAD WORK-DRIVING CENTER-DK TYPE (FIXED TIP)，DK15-MT.4, DK23-MT.4, DK32-MT.4
LATHE DEAD WORK-DRIVING CENTER-DK TYPE (FIXED TIP)
- Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1°. - Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
- Applicable for gear hobbing machine.
- Accuracy : 0.008mm
$60.00 – $150.00
Compare
| Model | DK15-MT.4, DK23-MT.4, DK32-MT.4 |
|---|
Based on 0 reviews
Be the first to review “DK：LATHE DEAD WORK-DRIVING CENTER-DK TYPE (FIXED TIP)，DK15-MT.4, DK23-MT.4, DK32-MT.4”
Related products
-
-
LI-HSUN
NHD：LATHE AUTO ADJUSTABLE TRANSMISSION CENTER-NHD TYPE，NHD31 MT.4, NHD32 MT.4, NHD33 MT.4, NHD34 MT.4
LI-HSUNNHD：LATHE AUTO ADJUSTABLE TRANSMISSION CENTER-NHD TYPE，NHD31 MT.4, NHD32 MT.4, NHD33 MT.4, NHD34 MT.4
LATHE AUTO ADJUSTABLE TRANSMISSION CENTER-NHD TYPE
- Suitable for the asperities of the workpieces. The auto adjustable transmission center with 5T and 6T design on end surface is able to adjust the stress point so that the workpieces will be done easily.
- The inside structure of the center is comprised of PU. It is nearly free of break-down and is durable and easy to fix.
- Accuracy : 0.008mm
SKU: n/a -
LI-HSUN
NCR：LATHE ADJUSTMENT WATER-PROOF CENTER-NCR TYPE，NCR-MT.3A, NCR-MT.3B, NCR-MT.4A, NCR-MT.4B, NCR-MT.5A, NCR-MT.5B, NCR-MT.6A
LI-HSUNNCR：LATHE ADJUSTMENT WATER-PROOF CENTER-NCR TYPE，NCR-MT.3A, NCR-MT.3B, NCR-MT.4A, NCR-MT.4B, NCR-MT.5A, NCR-MT.5B, NCR-MT.6A
- The shaft uses alloy steel and hardened through vacuum heat treatment to (HRC60°±1°).
- Uses the combination of taper roller bearing, thrust bearing and needle bearing.
- Applicable to medium and heavy loads, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
- Adjustable to reach original loading capacity after using for a long period of time.
SKU: n/a -
LI-HSUN
NK,NKS：LATHE ROLLING CENTER-NK A/B TYPE，NK-MT.2A, NK-MT.3A, NK-MT.3B, NK-MT.4A, NK-MT.4B, NK-MT.5A, NKS-MT.2, NKS-MT.3, NKS-MT.4
LI-HSUNNK,NKS：LATHE ROLLING CENTER-NK A/B TYPE，NK-MT.2A, NK-MT.3A, NK-MT.3B, NK-MT.4A, NK-MT.4B, NK-MT.5A, NKS-MT.2, NKS-MT.3, NKS-MT.4
- Center shaft and main body are made of bearing alloy steel and hardened to(HRC60°±1°)
- Center is assembled with thrust bearing, needle bearing and ball bearing.
- Applicable to medium and high speed laths with heavy loads.
- The tailstock pressure of lathe adjusts to five to eight kilograms (for reference)
※ NK-B TYPE: Long nose live centers are suitable for small workpieces.
SKU: n/a
There are no reviews yet.