-33%
| Model | MT3125, MT4155, MT5200, MT6270 |
|---|
Based on 0 reviews
Be the first to review “LATHE DEAD CARBIDE TIPPED，MT3125, MT4155, MT5200, MT6270”
Related products
-
LI-HSUN
DK：LATHE DEAD WORK-DRIVING CENTER-DK TYPE (FIXED TIP)，DK15-MT.4, DK23-MT.4, DK32-MT.4
LATHE DEAD WORK-DRIVING CENTER-DK TYPE (FIXED TIP)
- Body and center shaft are made of alloy steel with heat and sub-zero treatment.
※ Hardened : HRC60°±1°. - Driving centers are either with 6 teeth or 8 teeth design for superseding the driving dogs. It supports the workpiece on the surface for easy setup and rapid machining.
- Applicable for gear hobbing machine.
- Accuracy : 0.008mm
SKU: n/a - Body and center shaft are made of alloy steel with heat and sub-zero treatment.
-
LI-HSUN
SW：LATHE SUPER-LOAD CENTER-SW TYPE，SW-80#, SW-MT.5, SW-MT.6, SW-MT.7
- Shaft uses alloy steel and hardened through vacuum heat treatment to( HRC60°～62°).
- Applicable to heavy duty loads.
- The tailstock pressure of lathe adjusts to five to twelve kilograms. (for reference)
※ Waterproof design
SKU: n/a -
LI-HSUN
NCF/NCFP：LATHE HEAVY-LOAD CENTER-NCF TYPE,NCF-MT.3A, NCF-MT.3B, NCF-MT.4A, NCF-MT.4B, NCF-MT.5A, NCFP-MT.4, NCFP-MT.5
LI-HSUNNCF/NCFP：LATHE HEAVY-LOAD CENTER-NCF TYPE,NCF-MT.3A, NCF-MT.3B, NCF-MT.4A, NCF-MT.4B, NCF-MT.5A, NCFP-MT.4, NCFP-MT.5
- The shaft is made of alloy steel and through vacuum heat treatment (HRC60°±1°). It possesses great rigidity and high durability.
- Front end is fitted with angular contact ball bearing & thrust bearing. Middle & Rear needle bearing and the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
SKU: n/a -
LI-HSUN
BC：LATHE BULL NOSE CENTER-BC TYPE，BC106-MT.3, BC106-MT.4, BC106-MT.5, BC128-MT.4, BC128-MT.5, BC156-MT.4, BC156-MT.5, BC206-MT.4, BC206-MT.5, BC206-MT.6, BC258-MT.4, BC258-MT.5, BC258-MT.6, BC306-MT.5, BC306-MT.6, BC50-MT.2, BC50-MT.3, BC50-MT.4, BC63-MT.2, BC63-MT.3, BC63-MT.4, BC78-MT.3, BC78-MT.4
LI-HSUNBC：LATHE BULL NOSE CENTER-BC TYPE，BC106-MT.3, BC106-MT.4, BC106-MT.5, BC128-MT.4, BC128-MT.5, BC156-MT.4, BC156-MT.5, BC206-MT.4, BC206-MT.5, BC206-MT.6, BC258-MT.4, BC258-MT.5, BC258-MT.6, BC306-MT.5, BC306-MT.6, BC50-MT.2, BC50-MT.3, BC50-MT.4, BC63-MT.2, BC63-MT.3, BC63-MT.4, BC78-MT.3, BC78-MT.4
- The tip of bull nose center uses Cr-Mo steel and hardened to (HRC60°±1°).
- Uses a combination of taper roller bearing and ball bearing.
- Applicable to pipes turning.
- The tailstock pressure of lathe adjusts to six to ten kilograms. (for reference)
SKU: n/a
There are no reviews yet.