-29%
AUTOGRIP
RE-L：Compact style Rotary Hydraulic Cylinder with Coolant Connection and Safety Device
- For short form, light weight and high speed rotary cylinder. To allow coolant to be feed from the rear end of the distributor through the rotating union.
- Built-in safety check valves, pressure relief valves and proximity sensor.
- Can screw it from the rear end of the cylinder when mounting.
- The drain port should be independently connected to oil tank to avoid back pressure.
- The rotary cylinder should not run without liquid through coolant port.
- Stroke Detection Type can be customized to Linear Positioning System.
$1,059.00 – $1,459.00
Compare
| Model | RE-110L, RE-L120, RE-L130 |
|---|
Based on 0 reviews
Be the first to review “RE-L：Compact style Rotary Hydraulic Cylinder with Coolant Connection and Safety Device”
Related products
-
AUTOGRIP
3J：Finger Power Chuck,3J-05, 3J-06, 3J-08, 3J-10, 3J-12
- Gripping at the end face and preventing deformation of workpiece.
- Suitable for thin wall workpiece processing.
- The gripping compensating mechanism can grasp the irregular surface workpieces well.
- Air-tight pressure detect function is optional.
SKU: n/a -
AUTOGRIP
2J：Finger Power Chuck，2J-05, 2J-06, 2J-08, 2J-10, 2J-12
- This finger power chuck is specifically designed for the automatic loading and unloading system and can work with the robotic arm.
- Gripping at the end face and preventing deformation of the workpiece.
- Suitable for thin wall workpiece processing.
- The gripping compensating mechanism can grasp the irregular surface workpieces well.
- The air-tight pressure detection function is optional, it can avoid excessive swarf and chips when machining.
SKU: n/a -
AUTOGRIP
CL：Collet Chuck,CL-26, CL-30, CL-36, CL-42, CL-52, CL-6017, CL-6022, CL-80
- PUSH type collet used mainly on turning, CNC, special purpose machines , ect.
- High clamping accuracy, high speed and high rigidity.
- Sealed against swarf, chips and coolant.
- The collet used must accord with DIN 6343.
SKU: n/a -
AUTOGRIP
2M：WEDGE-HOOK type Long Stroke 2 Jaw Lathe Chuck,2M-05, 2M-06, 2M-08, 2M-10, 2M-12
2M 2 jaw chuck is a device used in machining and turning operations to hold and secure a workpiece on a lathe or similar machine tool. It is called a “two-jaw” chuck because it consists of two jaws that can be adjusted to grip and center the workpiece.Key features and functions of AUTOGRIP® 2 jaw lathe chuck:
- The primary function of a 2 jaw power chuck is to securely grip the workpiece. The jaws of the chuck can be adjusted independently to hold the workpiece with a firm and concentric grip.
- WEDGE-HOOK type two jaw chuck, and long jaw stroke.
- Matching surfaces of all parts hardened, ground, and lubricated directly.
- High rigidity and high repeatability precision.
- Deliver up to 20% more speed, gripping force, and bore size when compared to conventional chucks.
- Allowing for rapid removal and replacement of workpieces. This feature saves time and enhances efficiency in machining processes.
- Can be flipped around to accommodate different types and sizes of workpieces which increases flexibility and adaptability when machining various parts.
SKU: n/a
There are no reviews yet.