-11%
AUTOGRIP
SCB：Stationary Draw in Collet Chuck,SCB-52, SCB-65
- Build-in cylinder, ideal for drilling machines, milling machines and machining centers.
- Work with Autogrip’s rubber collet(RG series), quick change and saving runtime.
- Two modes for the media supply: side-supply mode or baseplate-supply mode.
$1,599.00 – $1,799.00
Compare
| Model | SCB-52, SCB-65 |
|---|
Based on 0 reviews
Be the first to review “SCB：Stationary Draw in Collet Chuck,SCB-52, SCB-65”
Related products
-
AUTOGRIP
3U-K：Pull Lock Power Chuck,3U-205K, 3U-206K, 3U-208K, 3U-210K, 3U-212K
- Pin-Arbor Draw Down type 3-jaw non-thru-hole power chuck.
- High radial gripping force and high accuracy.
- Suitable for heavy machining.
- Can work with the airtight detection device to perform axial position confirm, suitable for the precision of large length size process.
SKU: n/a -
AUTOGRIP
4T：4 Jaw Two Motion Type Independent Chuck,4T-08, 4T-10, 4T-12, 4T-15
- CRANK type with two pairs of 2 jaws self-center independent of each other.
- The 4T series jaw chuck is suitable for square bars and other nonuniform-shaped workpieces.
- Precisely center cylindrical stock to within the limits of the lathe’s accuracy.
- Form rectangular shaped objects.
SKU: n/a -
AUTOGRIP
2J：Finger Power Chuck，2J-05, 2J-06, 2J-08, 2J-10, 2J-12
- This finger power chuck is specifically designed for the automatic loading and unloading system and can work with the robotic arm.
- Gripping at the end face and preventing deformation of the workpiece.
- Suitable for thin wall workpiece processing.
- The gripping compensating mechanism can grasp the irregular surface workpieces well.
- The air-tight pressure detection function is optional, it can avoid excessive swarf and chips when machining.
SKU: n/a -
AUTOGRIP
3L：CRANK type Extra Long Stroke Thru-Hole 3-Jaw Power Chuck,3L-205, 3L-206, 3L-208, 3L-210, 3L-212, 3L-215
AUTOGRIP3L：CRANK type Extra Long Stroke Thru-Hole 3-Jaw Power Chuck,3L-205, 3L-206, 3L-208, 3L-210, 3L-212, 3L-215
Our 3 jaw lathe chuck is widely used for Lathes and milling machines, it is best for holding and rotating the workpiece during machining operations such as turning, thread cutting, facing, boring, drilling, grinding, and parting.
- Crankshaft three jaw lathe chuck with the large through-hole, and extra-long jaw stroke.
- 3 jaw power chuck has the same self-centering chuck, its jaws are interconnected via a scroll gear and can move at the same time.
- Matching surfaces of all parts hardened, ground, and lubricated directly.
- High rigidity and high repeatability precision.
- three jaw chuck is the best option for holding circular or hexagonal cross-sections
- 3 jaw lathe chuck with an accuracy level of around 0.010
- J is the hole diameter of the blank draw nut, K is the maximum thread specification, and it could be customized.
SKU: n/a
There are no reviews yet.