CBE/CBEA：End stop Collet Chuck,CBE-42, CBE-4212, CBE-42A5, CBE-42A6, CBE-52, CBE-5212, CBE-5217, CBE-52A5, CBE-52A6, CBE-65, CBE-6514, CBE-65A5, CBE-65A6, CBE-65A8
The pull-back positioning clamping, combined with the workpiece stop block mechanism, features radial clamping and axial fine-tuning torque, enabling precise positioning of the workpiece feeding length for enhanced length accuracy control.
The blocking block and dust cover can be swapped for versatile use and chip protection.
J is the hole diameter of blank draw nut.
K is the maximum thread specification and it could be customize.
The blocking block and dust cover can be swapped for versatile use and chip protection.
J is the hole diameter of blank draw nut.
K is the maximum thread specification and it could be customize.
$1,039.00 – $1,539.00
Compare
| Model | CBE-42, CBE-4212, CBE-42A5, CBE-42A6, CBE-52, CBE-5212, CBE-5217, CBE-52A, CBE-52A5, CBE-65, CBE-6514, CBE-65A5, CBE-65A6, CBE-65A8 |
|---|
Based on 0 reviews
Be the first to review “CBE/CBEA：End stop Collet Chuck,CBE-42, CBE-4212, CBE-42A5, CBE-42A6, CBE-52, CBE-5212, CBE-5217, CBE-52A5, CBE-52A6, CBE-65, CBE-6514, CBE-65A5, CBE-65A6, CBE-65A8”
Related products
-
AUTOGRIP
4T：4 Jaw Two Motion Type Independent Chuck,4T-08, 4T-10, 4T-12, 4T-15
- CRANK type with two pairs of 2 jaws self-center independent of each other.
- The 4T series jaw chuck is suitable for square bars and other nonuniform-shaped workpieces.
- Precisely center cylindrical stock to within the limits of the lathe’s accuracy.
- Form rectangular shaped objects.
SKU: n/a -
AUTOGRIP
2J：Finger Power Chuck，2J-05, 2J-06, 2J-08, 2J-10, 2J-12
- This finger power chuck is specifically designed for the automatic loading and unloading system and can work with the robotic arm.
- Gripping at the end face and preventing deformation of the workpiece.
- Suitable for thin wall workpiece processing.
- The gripping compensating mechanism can grasp the irregular surface workpieces well.
- The air-tight pressure detection function is optional, it can avoid excessive swarf and chips when machining.
SKU: n/a -
AUTOGRIP
2D：Pull Down Power Chuck,2D-06, 2D-08, 2D-10
- Radial clamp and axial pull down at the same time, keep the workpiece attaching close to the base surface of the chuck.
- Almost no workpiece uplifting displacement.
- The body and the cylinder pull-down mechanism are heat-treated and fine boring, which guarantee the clamping precision and durableness.
- Airtight pressure detect function is optional.
SKU: n/a -
AUTOGRIP
3D：Pull Down Power Chuck,3D-04, 3D-05, 3D-06, 3D-08, 3D-10, 3D-12, 3D-15
- Radial clamp and axial pull down at the same time, keep the workpiece attaching close to the base surface of the chuck.
- Almost no workpiece uplifting displacement.
- The pull down chuck’s body and the cylinder pull-down mechanism are heat-treated and fine boring, which guarantees the clamping precision and durableness.
- The airtight pressure detection function is optional.
SKU: n/a
There are no reviews yet.