-25%
| Model | 3P-04, 3P-05, 3P-06, 3P-08, 3P-10, 3P-12 |
|---|
Based on 0 reviews
Be the first to review “3P：WEDGE-HOOK type 3-Jaw Lathe Chuck,3P-04, 3P-05, 3P-06, 3P-08, 3P-10, 3P-12”
Related products
-
AUTOGRIP
3U-K：Pull Lock Power Chuck,3U-205K, 3U-206K, 3U-208K, 3U-210K, 3U-212K
- Pin-Arbor Draw Down type 3-jaw non-thru-hole power chuck.
- High radial gripping force and high accuracy.
- Suitable for heavy machining.
- Can work with the airtight detection device to perform axial position confirm, suitable for the precision of large length size process.
SKU: n/a -
AUTOGRIP
3J：Finger Power Chuck,3J-05, 3J-06, 3J-08, 3J-10, 3J-12
- Gripping at the end face and preventing deformation of workpiece.
- Suitable for thin wall workpiece processing.
- The gripping compensating mechanism can grasp the irregular surface workpieces well.
- Air-tight pressure detect function is optional.
SKU: n/a -
AUTOGRIP
CBE/CBEA：End stop Collet Chuck,CBE-42, CBE-4212, CBE-42A5, CBE-42A6, CBE-52, CBE-5212, CBE-5217, CBE-52A5, CBE-52A6, CBE-65, CBE-6514, CBE-65A5, CBE-65A6, CBE-65A8
AUTOGRIPCBE/CBEA：End stop Collet Chuck,CBE-42, CBE-4212, CBE-42A5, CBE-42A6, CBE-52, CBE-5212, CBE-5217, CBE-52A5, CBE-52A6, CBE-65, CBE-6514, CBE-65A5, CBE-65A6, CBE-65A8
The pull-back positioning clamping, combined with the workpiece stop block mechanism, features radial clamping and axial fine-tuning torque, enabling precise positioning of the workpiece feeding length for enhanced length accuracy control.
The blocking block and dust cover can be swapped for versatile use and chip protection.
J is the hole diameter of blank draw nut.
K is the maximum thread specification and it could be customize.The blocking block and dust cover can be swapped for versatile use and chip protection.
J is the hole diameter of blank draw nut.
K is the maximum thread specification and it could be customize.SKU: n/a -
AUTOGRIP
2M：WEDGE-HOOK type Long Stroke 2 Jaw Lathe Chuck,2M-05, 2M-06, 2M-08, 2M-10, 2M-12
2M 2 jaw chuck is a device used in machining and turning operations to hold and secure a workpiece on a lathe or similar machine tool. It is called a “two-jaw” chuck because it consists of two jaws that can be adjusted to grip and center the workpiece.Key features and functions of AUTOGRIP® 2 jaw lathe chuck:
- The primary function of a 2 jaw power chuck is to securely grip the workpiece. The jaws of the chuck can be adjusted independently to hold the workpiece with a firm and concentric grip.
- WEDGE-HOOK type two jaw chuck, and long jaw stroke.
- Matching surfaces of all parts hardened, ground, and lubricated directly.
- High rigidity and high repeatability precision.
- Deliver up to 20% more speed, gripping force, and bore size when compared to conventional chucks.
- Allowing for rapid removal and replacement of workpieces. This feature saves time and enhances efficiency in machining processes.
- Can be flipped around to accommodate different types and sizes of workpieces which increases flexibility and adaptability when machining various parts.
SKU: n/a
There are no reviews yet.