| Model | A15-8, A16-10, A16-8, A211-20 |
|---|
Based on 0 reviews
Be the first to review “A1（A2)：3-Jaw A1(A2) Type Chucks,A15-08, A16-08, A16-10, A211-20”
Related products
-
CHANDOX
MEL,MELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chuck Fixtures,MEL-06, MEL-08, MEL-10, MELT-06, MELT-08, MELT-10
CHANDOXMEL,MELT：2、3-Jaw Crank Type Long Jaw Stroke Hollow Power Chuck Fixtures,MEL-06, MEL-08, MEL-10, MELT-06, MELT-08, MELT-10
1. Crank Type Long Jaw Stroke with the large through-hole.
2. A super long jaw stroke chuck is suitable for clamping workpieces that need to avoid bulged parts.
3. Install on the hydraulic vertical stationary cylinder to connect the hydraulic pump to actuate the clamping work.SKU: n/a -
CHANDOX
P-S：Large Through Hole Super Thin Hollow Rotary Hydraulic Cylinder
1.Super thin & Lightweight：Super thin outer structure makes the weight lighter than the traditional rotary cylinders； meanwhile, the compactness and miniaturization lower the burden of machines.
2.Large Thru-hole Diameter：With large open center, gripping range of Bar stock can be increased.
3.Built-in Check Valve：With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.SKU: n/a -
CHANDOX
P：Super High Speed Hollow Rotary Hydraulic Cylinders,P0928, P1036, P1246, P1552, P1875, P1878, P2091, P2093, P2511, P2916, P3420
CHANDOXP：Super High Speed Hollow Rotary Hydraulic Cylinders,P0928, P1036, P1246, P1552, P1875, P1878, P2091, P2093, P2511, P2916, P3420
1. Hydraulic rotary cylinder is used to actuate the power chuck clamping action.
2. Connect the through hole of cylinder, draw-bar and chuck, then adapt with bar-feeder to achieve the fast loading.
3. With built-in “check valve”, work pieces can be effectively prevented from flying out during abrupt failure of pressure.
L:Longer strokeSKU: n/a -
CHANDOX
OPB：3-Jaw Large Through Hole High Speed Power Chuck,OPB-206、 OPB-208、 OPB-210、 OPB-212、 OPB-215、 OPB-218
CHANDOXOPB：3-Jaw Large Through Hole High Speed Power Chuck,OPB-206、 OPB-208、 OPB-210、 OPB-212、 OPB-215、 OPB-218
1. A power chuck is suitable for installation on a lathe machine, milling machine, or special machine to clamp workpieces.
2. A chuck with an open center through-hole allows the workpiece to be inserted into the through-hole
3. By enlarging the through-hole, larger workpieces can be inserted.
4. A 3-jaw chuck is suitable for clamping round bar workpieces, while 2-jaw and 4-jaw chucks are suitable for clamping irregular workpieces.
5. The power chuck needs to be actuated by a hydraulic rotary cylinder and a draw-bar to achieve the clamping action.SKU: n/a
There are no reviews yet.